Mini Classifieds

front end parts
Date: 03/30/2018 12:48 pm
79 pinto headlight,tailight,side marker light assemblies

Date: 07/17/2018 09:22 pm
Ford Speedometer Hall-Effect sensor with 6 foot speedometer cable

Date: 12/30/2022 01:30 pm
Bumpers
Date: 07/06/2018 04:47 pm
Pinto Parts for sale
Date: 06/19/2017 02:01 pm
Needed, 2.0 or 2.3 motors
Date: 09/30/2018 07:47 pm
1975 Ford Pinto

Date: 01/13/2020 11:02 am
72 Runabout for Sale- Washington

Date: 02/28/2024 02:07 pm
Automatic Wagon
Date: 06/14/2019 11:22 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 1,722
  • Online ever: 1,722 (Today at 02:19:48 AM)
Users Online
  • Users: 1
  • Guests: 587
  • Total: 588
  • rob289c
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

ThunderPinto II rides again!!!!!!!

Started by High_Horse, September 18, 2005, 08:21:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

redmustangman3

Nice ride- thanks for all the photos. You will surprise a lot of people with that package !!! Joe
1971- 289 V8; B&M C4; 9" with 4:11 posi. Several suspension upgrades and body modifications.
1974- 2.3L wagon,4-spd,totally stock. Medium lime yellow, avacado interior, 99k miles.
1972- 1984 Mustang SVO turbo; 5-speed tremec; 9" rear w/positraction; fiberglass front & doors; upgraded suspension.

gearhead440

High Horse, what kind of air cleaner are you running in order to allow your engine to without the use of a hood scoop?  Are you still using the 2BBL carb and intake?  Thanks.
Speed is only a question of money: Just how fast do you want to go?

gearhead440

Very glad to hear that things are going well for the thunder pinto  ;D!  Keep an eye out for  :police: but I'm sure you drive like an  :angel: on the roads.
Speed is only a question of money: Just how fast do you want to go?

High_Horse

Yes Pintony a Blast!!!!!!  I did a 70 footer today. And if it wasn't for the short runway I'd have eased it into second. No brake, just a straight punch. And yes gas tank was full. I missed the show but went through the park today finally catching a collective of street rods. Didn't stop though. Just eased through. Ha!!!!!
                                                                                                      High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

Pintony

Hello High_Horse,
Sounds like your having a "BLAST"!
Yes... Brakes are a GOOD thing. ;D
Good luck at the show today.
From Pintony

High_Horse

Hello again fellow Pinto dudes and dudettes,
       I have been test running ThunderPinto now for the past two weeks and all seems to be going good. I took it to my transologist yesterday and after a short test drive he says the trans is just the way he expected it to be. I rejetted about a week ago to richen up some white plugs. After about 40 miles of freeway since then I looked today and noticed only a glimse of color so I opened them up some more......BURNOUT CITY!!!!!!!!!!!!!
But all is holding together.I am doing little things that have not been done for quite some time like wheel and brake work, steering linkage lubrication  and I ripped out the back seat and threw it away.
I will be attending a local dealership car show tomorrow and am looking forward to raising some eyebrows. By the way!!!! I get allot of looks both from people that have owned Pintos and have not seen one for a while and youngsters that wonder just what the heck that is. Ha!!!!!!! Have not got stopped yet but I am keeping my wallet with me to save some time. I know it will happen. Also, for the record I am running 15% 200 proof on top of 91 octane. BURNOUT CITY!!!!!!!!!!!!!!!!!!!!!!!!!!1
                                                                                                        High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

gearhead440

Always glad to help out a fellow admirer of Pink  8) and I do love the High Impact (HIP) colors of the late 60 and early 70's Mopars! 
Speed is only a question of money: Just how fast do you want to go?

High_Horse

Gearhead440, Ya!!!! Well Thanx. That is what I had in mind. Deep Pink. The gears are definitly turning.
                                                                                                      High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

gearhead440

High Horse, from another thread you mentioned a penchant for pink so I'm enclosing some pics of Panther Pink vehicles.
Speed is only a question of money: Just how fast do you want to go?

gearhead440

Looks AWESOME, dude  ;D.  You continue to be my inspiration and I appreciate all the chronology and documentation you have done with your project.  I am certainly grooving on your incorporation of technologies and I have found that if water of 190F or more hits a plastic drink bottle the bottle will deform quickly.  We have 190F water dispenser at work and you just have to experiment with items like that - HOT  :o when the bottle deforms and sends scalding water coursing down your hand.  I hope it will work for you better than it worked for me :D.
Speed is only a question of money: Just how fast do you want to go?

High_Horse

Thank You, Pintony. I very much appreciate your help. I'll get on with it and let you know what happens. Now that you mention it I don't even know what my gear ratio is. Tell me Pintony, what gear ratio might I have? 77 V6 wagon. But more importantly, What ratio would you suggest for hitting the freeway and making the meets. Wouldn't I be better off changing the speedo gearing after I change the rearend gears if need be?
Anyway, I continue to put this car back together and next is the front spoiler. I am going to put it on a little better then it was before with easy removal and installation being a priority. Then I can configure placement for the tranny cooler and oil cooler. Here are some pics so you can see what I am doing.
                                                                                                           High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

Pintony

Hello HH,
The biggest gear I know of is a 23 tooth. Jeep Part #j3167393
That is what I am running in my Purple Pinto. 4.11 W/ Borg warner T-5
The 23 tooth gear is the biggest gear that works in our fords.
Here is a link to some ratios and gear choices to help you with your speedo woes.
http://www.flemworld.com/Hto/rear.html

From Pintony

High_Horse

Glassman, Yes.....It is in fact a...........Gatorade bottle. In my line of work it is called association of technologies. Besides it was handy. Also, to keep you guys and Pintoettes abreast of my progress....I insured and tagged ThunderPinto Monday and took it for a ride today. My mother-in-law went with me and did not get scared cause I did not go over 55. But I could not exactly tell because my speedo is reading 55 when I am doing only about 30. I put the pinion gear on the speedo cable that came with the c4. What should I do ???????? I am currently putting to many miles on my car when I drive it. The v6 radiator is doing ok with no thermostat and the little bypass tube plugged up for max flow. My therm switch indicates about 180. I opened up the main jets a bit and turned the idle screws out a 1/4 turn cause the plugs were snowwhite. Did about a 15 footer and easily chirped it into second just with a casual dig on the throttle. 0 TO 50 IN 1 SECOND. Aha!!!! Whats the trick with the speedo?
                                                                                                                               High_Horse
                                                                                                                   
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

High_Horse

Tigger, I made the headlight covers myself. I cut a template out of cardboard and then made two exact identical duplicates. I used 1/8 inch thick Lexan. I then drilled the holes and matched them to the rim around the headlight opening. They are tinted with some brown tinting I happened across at a garage sale. Those covers were on my cruising wagon and now on ThunderPinto. They are the better part of 15 years old.
                                                                                                 High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

TIGGER

H.H, where did you get the headlight covers from?  How do they attach?
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

Glassman

Looking good. Is that a Gatoraide overflow bottle?

The burnout thread---------> http://www.fordpinto.com/smf/index.php?topic=797.0  ;D

We need more Pics and vids.

Pintony

Nice JOB H.H.

Yes, a nice compliment makes all your hard work worth while!

From Pintony

High_Horse

I received my first compliment today......I't sounds good. Vroooom!    Vrooooom!!!!!!!
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

High_Horse

I do hope that this project of mine bolsters the enthusiazm (did i spell that right?) of you other Pinto dudes and dudettes to keep on going and to take the time to do it well.
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

High_Horse

Further test runs indicate that everything is looking good. I called today to get the insurance back on line and will pick up plates tomorrow. That will set the stage for Crown Vic Police Interceptor accompanied freeway running,speedo checks and some quality break in time. Then we change the oil and do jetting and powervalve to advance unit syncro. Then it is burnout time!!!!!!!!!!!!!!!!!!!!!!!!!!!! Please direct me to the burnout thread as I have not seen it.
                                                                                                            High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

Glassman

Cool. Congratulations.  Don't forget to post the burnout pics in the burnout pic thread.  ;)

High_Horse

I spent last week getting the power steering pump on. I carefully carved away as much of the mounting bracket as I could without compromising the sturdyness and painted them(shiney). Took it out Sunday night for a pack of smokes. Just up the street but still an official errend run.I don't have plates yet. Ha!!! My chevy hot rod buddy a few houses away said it sounds good. I looked around while I cruised to see if anybody was checking me out....They were not. But still.
Thanx guys!!!!!!!!!
                                                                                                                     High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

dirt track demon

 ;D  on the 18th of sept.  i bet your wife felt like she had been on a saddle since january!!! ;) :D :-X :angel:

Congratulations, it is an awesome feeling isn't it?
Favorite place to race:on the xbox

Fomoco's biggest achievement:
The PINTO!!

Fomoco's biggest mistake:
Not offering a V-8 Pinto!!!!!!!

gearhead440

Glad to see you back in the saddle again  ;D.
Speed is only a question of money: Just how fast do you want to go?

High_Horse

Yes Tigger, I made no effort or had the need to alter the exterior apperance of this car. The only noticable thing is the 3" pipes sticking out from in front of the rear wheel wells. If you want to see some pictures then see "ThunderPinto gets an engine" in the project area. I will be taking more pics but not till after I replace the seal in this power steering pump. I guess 130 thousand miles and 2.5 years of sitting has finally taken it's toll.
                                                                                                      High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

TIGGER

Looks like a nice sleeper ;D  How about some pics of the motor?
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

High_Horse

Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

High_Horse

More pics..........Yaaaaaaaaaaa!!!!!!!!!!1
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse

High_Horse

On January 19, 05 I undertook the 302/c4 conversion project on ThunderPinto (1977 v-6 wagon). Yesterday(September 17, 05)  it pulled out of the garage under it's own power. Yesterday was an around the block test run (4 times). Today I made some adjustments and checked some things and put about 5 miles on it. I cannot begin to tell you how it feels. This baby is like a Jackrabbit!!!!!! The trans is extremely crisp and shifts with the speed of light. I even got a chirp and I wasn't even trying. I plan to take it to the dyno guys for a readout on the output. But I am in the saddle again and had to share it with you all.
                                       Yessssssssssssssssssssssssssssssssssssssssss!!!!!!        High_Horse
Started with a Bobcat wagon. Then a Cruising wagon. Now a Chocolate brown 77 wagon. I will enjoy this car for a long time. I'm in. High_Horse