Mini Classifieds

Wheels and Parts

Date: 07/06/2018 04:50 pm
Front grill for '72
Date: 03/02/2022 12:09 pm
Early Rare Small window hatch
Date: 08/16/2017 08:26 am
1976 Ford Pinto

Date: 07/16/2019 02:51 am
ISO instrument panel 80 hatchback
Date: 04/20/2017 08:56 pm
ford pinto door panels
Date: 03/20/2022 07:51 pm
Early 2.0 engines
Date: 05/09/2018 12:45 pm
1970-1973 Gas Tank/Blue Dash
Date: 02/07/2019 11:57 pm
upholstery for bucket seats
Date: 10/30/2018 08:44 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,896
  • Latest: tdok
Stats
  • Total Posts: 139,576
  • Total Topics: 16,268
  • Online today: 756
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 373
  • Total: 373
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Cruising Wagon stripes - I may have found a manufacturer but I need some help

Started by FlyerPinto, April 15, 2008, 05:55:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

derick7085

Yes I received the stencils and they look great. Paint is a ways off. Going to the blaster in a couple weeks and then Fab work. Will be a long process but will be really cool when I'm done. I will keep you posted on progress.
thanks again Dave.

DBSS1234

I trust you got the stripe stencils by now. Just wondering how the paint job is going.

DBSS1234


derick7085

Thanks Dale. PayPal sent.
My Address

Dave Erickson
1883 Piedras Circle
Alamo CA
94507
925-260-2281 cell

Thank You Again

DBSS1234

My paypal account is under bjj61778@gmail.com or you can send to:

Dale Jacobson
5453 Rose Street
Owatonna, MN 55060

derick7085

THANK YOU. Ok so I am total new to this thing. How do I get money to you for shipping? Your address?
Sorry NEWBEE

DBSS1234

They will ship in a cardboard tube from 55060. tube measures 5-1/2" in diameter x approx. 36" long. Follow the process from the Pinto restoration for how to do it. If you have any questions please ask.

P.S. When thru please return them to me.

derick7085

I would really appreciate that. Will they go in a cardboard tube for shipping? PM me with contact info so I can get you shipping costs and...
Thanks Dave

DBSS1234

I have the stencils (rubbings of the original stripes) from my car. If you are interested I could borrow them to you for the cost of shipping plus what ever you think it is worth to you. In other words, donations are accepted. :)

derick7085

Got to the last page of the threads but didn't see the contact info for the Stripes? I see the paint color codes in the thread but really need the stencils or tracings for locations? Help

DBSS1234

I have the rubbings from my 77 cruising wagon and the color codes I used. To see how it works look thru the old threads for "the restoration of my 1977 V-6 Cruising Wagon. If interested let me know.

derick7085

Ok this is a really old thread but Ill try anyway. Looking for a stripe kit for my 77 cruising wagon, or color codes to paint them on. Anybody have these?
Thanks dave

FlyerPinto

I received the stripe kit and this morning finally laid all the pieces out on the floor to see exactly what I have. There are three pieces here, the "hockey stick" stripes that surround the bubble windows (one for each side) and extend down to the bottom of the window panel, and the liftgate stripes. That's it. I will be going to see my stripe guy and see what he can figure out in the meantime, based on the photos I have of my original car and the stripes themselves. Does anyone have a car with these stripes still on them that they would measure for me? I'll take the hit for paying for the layout and all that for an exact match, so if anyone wanted a new set of stripes we would actually have a source for them that had all the pertinent information in their computer already. If anyone is close by to Dayton, Ohio I'd gladly come by and do the work myself, I'd even sketch the things out on newsprint (like a tombstone rubbing). Thanks for any help.
1977 Bobcat HB
1977 Bobcat HB
1978 Pinto Cruising Wagon

So many projects, so little time...

FlyerPinto

I ordered the set this morning from Green. It was a partial set so they only charged $50. I'm not entirely certain which section is missing but I believe it is the portion that crosses the hood. I'll find out when it gets here. Either way, whether it is suitable as a pattern or to be used itself it is a great find. Thanks a bunch for the tip, I wouldn't have expected them to have this on hand. I may still need some measurements, but this will be a tremendous help.
1977 Bobcat HB
1977 Bobcat HB
1978 Pinto Cruising Wagon

So many projects, so little time...

77pintocw

Hey FlyerPinto:

I bought a set of the NOS stripes from Green Sales last year that are like the ones on my CW, the
two color blue set.  Yes, they were rolled up in a box, however, they were in very good shape.
The colors (hue) were correct and bright, they had the paper covers on front and
back which were protecting them, the stripes were made from 3M material.  I brought them to use
as a pattern just like you are planning to do.  I believe it is worth the money if you are going to
do the stripes right and like they came from the factory.  Also, they rolled out flat pretty quickly once
you take them out of the box.

77pintocw
1977, Pinto Cruising Wagon, White with Blue Graphics

FlyerPinto

I was kind of thinking the same thing, take the stripes to the guy and let him work off of them. I bought a set of these when my Pinto was new and had been hit in the door, so I had to buy a complete set. They were pretty pricey back then, a few hundred dollars as I recall. I'd use these if they are any good, but I wonder what shape they will be in, having been rolled up in a box for thirty odd years. I'll let you all know as soon as I found out. Thanks!
1977 Bobcat HB
1977 Bobcat HB
1978 Pinto Cruising Wagon

So many projects, so little time...

77turbopinto

Maybe your person could use the NOS ones to get all the information for reproducing them? I would imagine it would be much easier with them off the car, and that way they might be able to be a supplier of them. Just a thought....


Bill
Thanks to all U.S. Military members past & present.

FlyerPinto

That number looks like the same one the Ford guy gave me, I'll give them a call first thing in the morning. Thanks a bunch!
1977 Bobcat HB
1977 Bobcat HB
1978 Pinto Cruising Wagon

So many projects, so little time...

77pintocw

Hey FlyerPinto:

Green Sales (1-800-543-4959) has one NOS stripe kit that you are looking for.  The color scheme
is YELLOW, ORANGE , PLUM.  The part number is D7FZ7320000BA.  If you call ask for "DOC" and
I believe it will be around $200-300 for the kit.

Hope this helps.

Best Regards,

77pintocw
1977, Pinto Cruising Wagon, White with Blue Graphics

FlyerPinto

Ok folks, I need some help here. I have a couple of Cruising Wagons, one of each of the stripe styles. In my quest to restore the first car to reasonably original condition, I need new stripes. These are the three that run across the hood, over the fenders, down the doors and then up and around the port hole windows. I have found a very good custom manufacturer of automotive decals who says he may be able to make the stripe kits. I only need one for my car, but I'll get to that in a minute. Anyway, to properly do his thing he needs to have measurements from an original stripe kit on a car. A previous owner used a grinder to remove the stripes on my car, so I need help. Anyone have a Cruising Wagon with the stripe kit I mentioned that would be willing to get some measurements for me? I have lots of photos of my original car, articles from magazines, photos from online and all that. I even have access to the Ford microfiche (sp.) images, with color descriptions and numbers. But I don't have a car I can measure.

Meanwhile, if I can get the info to him and he decides he can do it, I'm definitely going to buy a set of stripes, maybe two (just in case I need a spare) and I'm willing to bet they could make the other version of stripes as well. How many folks would be interested in getting new stripes for their Cruising Wagons? I know this post may be more appropriate on the other thread, but I had to start somewhere. If someone has a car with the stripes I'm talking about, please e-mail me or pm me and I can tell you what I think it is they need to give this a shot. Or, if anyone actually has the specs that would be great, I've just never seen them myself. Thanks.
1977 Bobcat HB
1977 Bobcat HB
1978 Pinto Cruising Wagon

So many projects, so little time...