Mini Classifieds

1979 PINTO PARTS--FREE
Date: 09/13/2022 02:05 pm
'71,'72,or'73 small Ford v8 Pinto
Date: 01/23/2017 07:41 am
Leaf Spring Mount Rubber Insulator
Date: 08/05/2018 01:58 pm
74 Wagon Interior
Date: 01/22/2017 06:38 pm
2.3/C-4 torque converter needed
Date: 02/08/2018 02:26 pm
NOS Sedan decklid

Date: 10/23/2019 11:51 am
pinto parts for sale
Date: 07/25/2018 04:51 pm
1974 Pinto Misc. moldings & parts

Date: 12/20/2016 10:47 pm
Esslinger 2.0 intake
Date: 03/06/2017 11:58 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 247
  • Total: 247
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

2.3L Horsepower Boost

Started by From_Jonah, July 01, 2013, 11:01:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

amc49

There is no way a 1000 cfm TB is going to work on a Pinto motor. Good street engines can use 350 cfm and race stuff barely 500. 2.3s are known for fuel dropping out of suspension very easily anyway so FI will help but not overcome the massive TB.

Is the Offy intake the race one with no dual plane dividers? Even worse if so. That poor motor will choke. The stock exhaust manifold reinforces that even more. I wouldn't even think of mods like that without a good 4-1 header there. Four cylinder motors thrive on exhaust tuning.

From_Jonah

I think it's partly the valve seals but I seem to be burning a lot more of it than I was when I got it (last august). I drive it nearly every day 30 miles or more.

OhSix9: My car is a 1980, is that what you're refererring to as the core year?

Also, as a side note. Any of you that are close to Bama, I went and looked at a coupe today the guy was gonna sell me for $550 in Arab. It was in pretty bad shape so I passed it up cause I don't really have a place for it but if one of you guys wants his # PM me.
1977 wagon - baby blue full restoration project.

1980 wagon - (77 front clip) converted to cruising wagon. (Sold in 2015. Can't find her again.)

Jerry merrill

Are you sure that the oil burning is from worn out engine or just bad valve guide seals. Those are common on 2.3 motors but not that hard to change

From_Jonah

Sorry it's take. Me so long to reply guys. Anyways, thanks for all the tips! I'm still trying to decide what I'm gonna do. I'm burning oil like a son of a gun so I can decide whether to v8 swap or rebuild my 2.3. I'm probably gonna swap an 8.8 mustang rear end into it after I talk to the guy that does me welding and see if he even wants to touch it. Pintos down here are few and far between. As they are everywhere I guess. I'd love to just get a 8 inch out of a v6 but can't find one.
1977 wagon - baby blue full restoration project.

1980 wagon - (77 front clip) converted to cruising wagon. (Sold in 2015. Can't find her again.)

OhSix9

The reason I was inquiring as to your core year was the assumption you would be getting that head ported and it is really only important to match the intake port shape to that of the head so it affects which intake to recommend. on the d port heads it is common to use a carb adapter , fill the injector bosses or have them welded and port / knife edge the lower. If you are getting a boport head without supplying your own core then find out which head he will deliver. the other thing to look into are his cam grinds. As far as i am aware boport tends to focus on the force fed end of things and I believe that his grinds are turbo focused. Not sure he has any NA cams in his selection. 1000 cfm is way overkill and you might encounter some driveability issues and soggy throttle response.. 500 cfm is generally lots for a 2.3
Modest beginnings start with the single blow of a horn man..    Now when you get through with this thing every dickhead in the world is gonna wanna own it.   Do you know anything at all about the internal combustion engine?

Virgil to Sid

waldo786

My core is from my grandpa's 76 wagon, 2.3L.  And now you've got me excited about the bo-port job.  The fuel injection is the fast ez-efi unit.  The throttle body is huge, 1000 cfm, which concerns me a bit for being too big, but it fits on the offenhauser dual plane manifold for the 2.3l.  I have the parts in the garage, so it's definitely going on there :)  The ez-efi is supposed to be a pretty easy plug n play set up.  I'm figuring when I replace my head, I'll put the FI setup on her while I'm working.  I got the FI kit off a guy on Ebay, brand new never used and saved a couple hundred bucks that way, so I'm happy about it.

bbobcat75

I know this is not my topic but what year core is good to start with? I have a 78 bobcat, n have been collecting parts for my 85 turbo motor! Still looking for the roller cam!
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

OhSix9

BoPort heads haul balls...  The guy has mastered the art of drilling till ya almost hit water where 2.3's are concerned.
That is a lot of money for a cfi injection system but if it's already in the garage give er. what year is the core? the hot ticket tends to be an extrudehoned and knife edged efi lower and a carb adapter if you are gonna naturally aspirate a newer head.
Modest beginnings start with the single blow of a horn man..    Now when you get through with this thing every dickhead in the world is gonna wanna own it.   Do you know anything at all about the internal combustion engine?

Virgil to Sid

waldo786

What I'm having done is work on the heads with a new roller cam: http://bo-port.com/index.php?act=viewProd&productId=72.  I also have a FAST ez-efi fuel injection system which will be coupled with an offenhauser dual plane 4 barrel manifold and a stock ranger exhaust manifold.  Sounds fairly similar to what's been said.  I'm anxious to see how this will all perform.

thmpsn70

Im with ^^^^ him, ranger roller is simple and did my NA 2.3 a wonder in how it ran (but it was a 3cylinder before I swapped it out)

OhSix9

What are you getting for a core and how much do you want to spend for the whole deal.  Na options are compression ratio, a little port n polish. air in and out goes a long way with these motors.. OBD 1 fuel injection is so easy to wire, robbing a 2.3 mustang for the ecu and all the injection stuff beats a carb hands down. A shorty tubular from a ranger is a good exhaust option. if it has a slider cam do the ranger roller swap if you are not gonna cam it up as well.

The best option bar none is to blow on it a lil. even in small vam and injector trim it makes an amusing 150ish hp and you can probably dig up the stuff for next to nothing as everybody really in to them upgrades these components . Add overdrive behind it when you do the swap. These things breathe so poorly force feeding em is almost a required solution for any gains i would consider money well spent. Aside from being bolt in and bulletproof on the bottom end the 2.3 has little going for it. It is beyond me why the never twin cammed this design. 
Modest beginnings start with the single blow of a horn man..    Now when you get through with this thing every dickhead in the world is gonna wanna own it.   Do you know anything at all about the internal combustion engine?

Virgil to Sid

Jerry merrill

Try a full length header and adjustable cam gear so you can advance the cam about 2 deg. do you have a stick or auto? Rear gears?

From_Jonah

Hi all,

This week I'm picking up another 2.3 to overhaul while I'm driving my wagon with it's original 2.3 since I can't have it out of comission long enough to rebuild. I'm wanting to build this motor good. What are some of the best options to boost hp? I'm not expecting to run 8s on a track. I'd just like to have a little more get up and go.

Options I'm currently thinking about doing are

Offenhauser 2 barrel intake. Opinions on which carb to choose? And is it really worth it?

Headers

Lifted cam? Roller cam?

Any other options are welcomed. Thanks in advance guys!(And girls)
1977 wagon - baby blue full restoration project.

1980 wagon - (77 front clip) converted to cruising wagon. (Sold in 2015. Can't find her again.)