Mini Classifieds

Leaf Spring Mount Rubber Insulator
Date: 08/05/2018 01:58 pm
1971-1975 Pinto
Date: 01/09/2017 04:14 pm
72 Pinto parts
Date: 11/14/2019 10:46 pm
13x6 minilite style wheels MAKE OFFER——NEED GONE

Date: 08/01/2018 01:17 pm
'72 Runabout Drivers Side Door Hinge Set
Date: 12/15/2018 02:21 am
Front and rear seats for a 1976 Pinto Sedan
Date: 05/18/2020 10:22 pm
Various Pinto Parts 1971 - 1973

Date: 10/01/2020 02:00 pm
1972 Runabout 351 Cleveland V8

Date: 11/05/2016 09:03 pm
1973 Pinto Wagon

Date: 05/06/2022 05:13 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 640
  • Online ever: 1,681 (March 09, 2025, 10:00:10 AM)
Users Online
  • Users: 0
  • Guests: 593
  • Total: 593
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Starting on my 1972 Pinto

Started by PJO Pinto, December 02, 2012, 01:06:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

PJO Pinto

I am a lucky man, I think I have one of the few new copies of this book.



I actually got this book for Christmas from my wife, I still do not know where she found it. It has been a great read thus far, however I always like to draw from some more real world experiences from people who may have some insight.

That indeed may be a bit rich on the pegasus rods, but it is still good to know they are available.

Definitely a lot to learn, but it is a fun journey. Tomorrow I am going to start taking some trim and things off of the car, so there should be updates fairly regularly.

Thank you for the info again Paul.

TGIF!

cossiepinto

PJO,

There are so many ways to go that I'd rather leave that up to you and someone who is more knowledgeable with turbocharging. I knew a guy in Germany years ago who ran a blow through turbo on his 2.0, and claimed he was running stock rods.  I'd call Pegasus or Esslinger for tech help.  Pegasus sells a 1985+ rod that's stronger than the early ones, but they're $180 each! OUCH!  Honestly, matching everything up will be a hands-on endeavor between you and an engine builder, with things to consider like the condition of your crankshaft, etc.

Des Hammill published a book on the 2.0 SOHC (like yours) and the Cosworth YB (like mine).  He goes into great depth on the 2.0.  I just looked for the book online.  It must be out of print, because there's one for sale on ebay for OVER $500.00!!  That's the bad news.  The good news is that you can go to this link:

http://faq.ford77.ru/pdf/how_to_power_tune_Ford_SOHC.pdf

It's the same book in a pdf file and it's a free download.  There's a wealth of reading in this book, to include choosing the correct connecting rod for your needs.

Good luck and keep us posted on your project.

Paul


PJO Pinto

Thanks for the reply Cossie! Appreciate the parts insight, I am going to have to call some of them then.

Right now I am gathering parts, and you may be the perfect guy to help. I have the ak miller exhuast manifold, as well as an aftermarket intake manifold that I am going to run a holley tbi kit off of for a blowthrough setup. I guess I am going semi authentic haha.

Now I am trying to find pistons and rods. Not sure if I should import cossie rods and pistons or find some forged low compression std pinto pistons. I know you have the cossie experience, any thought?  With my math I am looking at 12 psi right now.

cossiepinto

PJO Pinto, thank you for your service!

Take a look around the 'net for these companies, who make lots of stuff for Pintos:  Esslinger Engineering still sells some 2 liter stuff.  Pegasus Auto Racing handles 2 liter engine parts for the sporty car folks.  Speedway Engineering has a whole section on mini-stock stuff (mostly 2.3 engines, but LOTS of chassis parts (careful, some early Pinto and late Pinto stuff is different, so ask). Finally,  I found my best sources are in the UK, where the "Pinto" engine is all over the place.  Good luck with your car.  I saw it as well in ebay, and it looks like it's found a good home.

Paul (a.k.a. Cossiepinto)

PJO Pinto

Finally made it home during Christmas to get her running. However, can't find the good pictures so for now here are some fairly generic ones.

The engine is really strong, which is good. Did not take too much to get it running well. The valves were really out of tolerance and the plugs were very, very old.



I love how large of tires you can fit on the rear with these.





This is my college car that I sold to my brother. It is still sitting at home, waiting for him to get back from overseas. I worked on cars and mopeds (yeah with the pedals) to make extra money when I was in college, so I gutted the inside in order to haul everything around. Came in handy getting the tires all over the place in order to be mounted.



This is a jankity temporary measure. I just could not get the carb to idle correctly, it was pulling too much air. Had to paste up the busted up air filter housing a little to give it some restriction. The air fuel ratio at the exhaust pipe was still correct at 3k rpm, so for now I will keep it like this. Engine is going to be pulled asap anyway to be rebuilt.



The defrost works.... slowly at least.



The back bumpers are very dented, almost like someone was trying to reform them into a different shape or something.

In two weeks I will be trailoring it down to where I live, and begin tearing her down. It is still sitting about 3 hours north of me, so all I can do for now is part search and wait.

The body is super solid, although it has suffered a lot of hackjob mechanical repairs over the years (I suppose I have now contributed with the airfilter). I think I am going to go for a period correct-ish rally build. Granted there were not a ton of Pinto's rallying around, but her British cousins with the same powerplant did it in abundance. I figure if I stick with Ford parts, ford colors, and build everything with quality parts it will be a fun ride and I won't have to feel guilty like if I were hacking it up.

Hoping to make it to the 2013 stampede!

PJO Pinto

Thank you very much guys, I truly appreciate the sentiments. Leaving home for so long, to be there of all places, would have no merit if it weren't for the great people here in the USA.

Just a couple weeks until I can get up and tune up the Pinto. I wonder if I can find a header by then... hah

Reddog

Love it! I know you heard it before but to be honest we can't tell you and everybody else enough, "thank you brother" I love the freedom that your sacrifice provides! Glad you are home, safe and enjoying your family. Looking forward to the upcoming pictures/video! God Bless, Brent and Tammy
Everyday is a gift! Live it to the fullest with no regrets!

pintoman1972

First of all, THANKS FOR YOUR SERVICE.

I'm sure, way back in your mind, you want to but a blown V8 in your 72.  But you have to start someplace and a rally car is a great place to start.

Good luck and let us know how you are doing

Dick


johnbigman2011

PJO I run the 2.0 in my 23 T and enjoy it very much. I have multiple set ups for it as well. 2 carb set up.. 4 bbl setup ...zoomies and other little stuff. You might have to hunt around for certain items, but that is half the fun of owning a Pinto!

Oh yeah, Welcome Home!!!
1972 Trunk Model..... Yeller Feller
1979 Wagon Turbo.... 85 2.3 Turbo
1923 T- Bucket ...... 2.0 Pinto Powered
F 250 Redneck Lincoln .... Pinto Picker upper

PJO Pinto

Thank you for the replies!

Yes I am home! Wooo. Yes this is in Ohio, I am sure some of you may have seen it on ebay. Very clean car, no rust at all! Literally, there is zero... absolutely amazing.

I just ordered a carb rebuild kit, new tires, and the petronix ignition. Hoping to be able to drive it about 150 miles to where I am living now after I just check over everything. Then I will begin ordering what I need.

That is encouraging about 2.0 parts. I suppose I made the assumption that not many people imported parts, but I may just go that route then. Initially when I bought it all I could think was that I would make it a v8, but then I started the 2.0 OHC and.... my goodness what a beautiful sound. It sounds as neat as my old 72 vw beetle, except it does not smoke and it starts on the first crank.

I was wondering what the wheels were, they are definitely nice. I can't imagine swapping them out, so any upgrades will definitely have to keep me with the four lug pattern.

In a few weeks when I run home and get her ready to make a trip I will take some more pictures, and maybe some video.

johnbigman2011

Nice car for sure... Do like those little smooth bumpers 8) You can still get most parts for the 2.0 especially across the big pond. Couple day wait period but no biggie. Check out www.burton.com. Plenty of good performance parts there for sure.

So are you back home to enjoy your new ride?
1972 Trunk Model..... Yeller Feller
1979 Wagon Turbo.... 85 2.3 Turbo
1923 T- Bucket ...... 2.0 Pinto Powered
F 250 Redneck Lincoln .... Pinto Picker upper

blupinto

Was that the one in Ohio? She's a good-looking car!  ;D
One can never have too many Pintos!

Scott Hamilton

PJ-
Nice ride! Looks like this one has the outlaw wheels- Good steady feet,

Be safe over there, post more shots when you get a chance!
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

Back in Blue

Awesome pick up!!  Keep the 2.0 in it! They are great little motors.
7 pintos and counting...

PJO Pinto

Hello everyone, first time post after browsing for a long time.

This is my 1972 Pinto. It appeared on eBay last April, and I was the lucky winner. I actually won the bid from Afghanistan when I was deployed, I am glad my initial bid I placed won it, because I sure did not have time or means to watch it!

The man who sold it to me was kind enough to coordinate with my parents, and he even delivered it himself free of charge.

It has the 2.0, which I think I will have built and tune up for the moment while I clean up and upgrade the rest of the car. I hope to eventually swap another Ford engine (seems the 2.0 pinto is really dropping off in the states) once I can find something unique and fitting to pair up with her.

Planning to begin autocrossing this Spring with it, I think with the 2.0 and some modding we will do alright.

Nice to meet all of you.