Mini Classifieds

1973 Bobcat Cruzin Wagon for Sale $4000 obo

Date: 04/13/2018 11:30 am
Oddsnends
Date: 12/20/2016 10:52 am
Pinto or Bobcat wagon wanted
Date: 08/05/2018 10:49 pm
1973 Pangra

Date: 01/06/2015 02:19 pm
Wanted 1973 Ford right fender
Date: 06/03/2017 08:50 pm
78 wagon instrument y
Date: 04/30/2018 07:41 pm
turbo 4 cyl and aod trans
Date: 12/14/2019 04:55 pm
Early 2.0 engines
Date: 05/09/2018 12:45 pm
Instrument Panel with Tach wanted
Date: 05/15/2022 11:36 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 628
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 226
  • Total: 226
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

78 302 swap in progress

Started by lateniteauto, September 29, 2010, 01:43:00 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

lateniteauto

I took my pinto over to the scales and right now it weighs 1380 lbs.  I have removed engine, transmission, drive line, and all of the interior except the bracing for the dash (also no front windshield).  Has anyone been able to remove the bracing and still mount the dash back in? I know that this is how the brake and clutch pedals mount, but I was thinking of converting to hydrolic.  Just need to know if I can reinstall the dash. Any help would be appreciated.

Pinto5.0

'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

lateniteauto

From the top:

lateniteauto

Check out my new wheels and tires for the rear.

dga57

Congratulations on the job!  I'm sure we'd all make faster progress on our projects if the money flowed a little more plentifully!  The end result will make it all worthwhile.
Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

lateniteauto

I got the job.  It has been quite a week.  work is hard, long, and outdoors, but the money is great.  I should be able to finally make some fast progress on the pinto.  They sent us home early this week because of Easter weekend.  Had to move the pinto to the ranch for storage, since I wont be home enough in the next few months to do any actual work on it.  I told my bodywork friend that we should hold off until i get back and do it all in one shot.  So once again progress has been stalled, but this time there will be a big payday and I can finally make big progress.  Every day I am out in the field I think about racing this pinto down the track, and that keeps me motivated.  I also think about cruising it everywhere. These thoughts make the day go by faster. 

lateniteauto

I need your help. Prayers, wishes, and good ju-ju.  I will take off on monday across the state to apply/test for a new job as a welders helper.  If I get the job, I will be making more than double what I make at my current job. This means more money for the pinto. Less time, but more $$$.  The job will last about 6 weeks and could turn into 6 months.  Also it will be a great chance for me to refine my welding skills, which could turn into even more $$.  So please keep me in your thoughts.  I can't wait to get this project back on the road. 

thecustommuffler

Tri`s won`t do jack for power. Steppes won`t matter on this build either. If you ever get the suspension dialed in and actually get "hookup", then worry about getting more from exhaust. 2.5" would be perfect for this NA mill.

lateniteauto

More bad/good news.  I finally got to a point where I could bar the engine over and check valve clearance.  With the stock style pistons I had purchased, and my custom cam, I only have .040" clearance. Everyone I have talked to says that the minimum should be .100".  Soooo- I have decided to purchase a whole new Forged rotating assembly.  This also gives me the opportunity to do a small stroker (331), gain compression (10.75), and the ability to run Nitrous (100-200 shot).  More $$= faster car  ;) .  I have also moved my pinto to the frame/body shop, and will be starting progress post haste.  I don't have any new pics yet.  Will be sure to bring the camera to the shop tomorrow morning and get pics.  500 Horsepower here I come (before Nitrous).

pintoman1972

The ding is from an erant jack handle while the body panel was removed.  Stuff happens.  I was not in the shop when it occured.  The owner has had offers on the car already so it may not be around next season. 

Let us know how your project is progressing.

lateniteauto

Pintoman:  First let me start by saying that is one hell of a ride!!!  Those custom panels are a brilliant idea.  The headers are B_E_A_utiful.   But i may have cried a little when I noticed a ding in the passenger side first primary tube.  At $2500 a pop you kind of have to.  None the less, I am sure they sound as good as they look.    I am trying to keep mine down on cost, so making them myself should help.  I have been looking into a product

pintoman1972

Just as an example and not to suggest anyone also have custom headers made, the new open Super Comp drag car we built earlier this year has custom fiberglass body panels and required a custom set of coated exhaust headers to fit those body panels.  The headers cost $2,500.00 for the set.


lateniteauto

pintoman:  thats a ton of info.  thank you very much.  It has kept me busy.

pintoman1972


lateniteauto

Fair: Thank you.  I wish the car looked as good as the engine does.  I am working part time at a freinds shop trading work for work.  He is a bodyman and is willing to trade my wrenching for his bodywork.  So eventually i will have a great looking ride.

Pintoman:  Thanks so much for those links.  They have already been useful.  If you have any other small tips or general knowlege on the subject I am all ears.

Fair 73

 I gotta tell you that it looks to be some great progress  . I like the shortie headers and hope they go in ok. Has anyone tried these or any shortie in a 73 Pinto. Anyway your project looks really good and is coming along nicely.

pintoman1972

Header and exhaust design takes some science, some engineering and a touch of magic.  Here are a few links to get you started........

http://victorylibrary.com/mopar/header-tech-c.htm

http://www.bgsoflex.com/bestheader.html

FYI  On THE BEAST I just replaced the 3 inch series 10 Flowmaster racing mufflers with a set of 3 inch series 44 Flowmaster street mufflers.  Took the harshness away but still kept it sounding loud and mean sounding as well as more street legal.

Dick

lateniteauto

Well as for the exhaust, I am gonna try and squeeze these BBK shorties in.  If that doesn't work I will do custom headers.  I don't want them to go under the frame and I want my inner wheel wells covered.  I have to cut out some cancer from the original battery holder.  A friend was kind enough to give me a piece out of his project to fill in the hole. So I may just refab the inner wells and go with these headers.  Equal length or even tri-y would be better, but we will see.   I will be doing 2.5" dual exhaust pipes with and x pipe and flowmaster SUPER 44s.  I'm tryin to pull as much scavanging as possible.  Anyone know the math equation for finding primary and secondary header pipes?  I know it is affected by cubic inches and RPM.


Reeves1

Cool ! Going to have a good breathing engine there ! (providing the exhaust system is done well)

The 302w I'm pulling out of the Pinto will (likely) get the same treatment, after the B2 swap is done.
Then maybe another Pinto ?

lateniteauto

Check out these heads!!  8) 

hobbit1games

GO! PINTO GO!

lateniteauto

WOW! Its been more than a year.  Has it really been that long? It has not been a year without progress though.  I have to explain... I TOOK MY BUDGET AND THREW IT OUT THE WINDOW!  "Some AFR heads would make this thing haul (explitive).  Oh and a Weiand single-plain to match. How about a beefed up valvetrain for higher RPM capability?  Dont forget the cam from COMP. Gonna need a big oil pan."  etc etc... you get the point. 

Anywho.  A friend lent me a carb for mock-up.  Here are the pics.  (remember... just mock up, no bolts are tight.)

smallfryefarm

Not sure but you may find on ebay or ask Larry Johnson where he got his. You have to remove all the windows including the side quarter windows and rear on the trunk model the liner wraps around the window lips. So the install isnt bad at all if you have some one that can do the windows.
Smallfryefarms Horsepower Ranch

lateniteauto

Any ideas on where to get a new one... Mine is in great shaped except for one the one little splitting seem on the rear.  It was perfect before I started removing the interior, then while removing the rear seat, I bumped it with my head, and RIP.  This got me thinking that I should replace it anyway, as it is getting brittle. I also thought of putting in more sound deading up top. How hard is a new one to install?  Does someone have an install documented? 

smallfryefarm

Looks good send more pics as you progress. Not sure what your head liner looks like but if your going to replace it i would do it before the window goes in, save you taking it back out.
Smallfryefarms Horsepower Ranch

dave1987

Smells like progress! :D

I like the idea of the carpet on the dash, I think I will do this on my 73' wagon, until I can get a new cap for it. Thanks! :)
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

lateniteauto

Here are some pics of my refinished dash.  I carpeted the pad and sprayed two layers of flat black paint on the metal.  Very happy with the outcome.  The pad looks like it was new underneath.  And now I dont have to worry about my shades sliding... just the rear tires.  Here are some steps and photos on a cheap refinished dash. Hope you like.

1First you need to remove your dash-pad from your car.
2Clean well with mild soap on a moist towel doing your best to keep any exposed foam dry.
3Rinse off any soap residue well. Dry. This will help the glue stick better...
4Cut and fill your pad.  Cut the high spots down, and if possible, use the cut foam to fill the low spots. Perhaps mix in a little glue.
5Using the bolts on the pad as anchors, stretch your carpet around the pad, using a staple gun to adhere the other side. If your foam is wet at all, this process will FAIL.  Also use as many staples as you can, almost making a stitch the whole length of the front of the pad.  I stapled mine as close to the natural seem as I could to keep them out of site when installed.
6Carefully take the carpet of the anchors and slightly seperate it from the pad. Just enough to spray in your adhesive. I recomend 3M Headliner Spray Adhesive. Coat both sides with a very light coating, if you overspray it will ruin your carpet.  Let it tack/dry for a few minutes before restretching the carpet.
7Gently try to pull out any small creases, always pull never push the crease.  This part can be tricky on the gauge rise, so try to fit it tight before you glue.
8Trim the sides and staple them down as well.

I am very happy with how mine turned out, and have done it on a friends 78 pinto wagon.  Haven't installed my dash yet, as I am waiting to intall the windshield first.

lateniteauto

  Thank you for the info on posting pics.  In return a little eye candy, that is assured to get better with time.

  I have begun to make an album but maybe a little slow getting them all posted, and I regret that camera is not the best out there.

smallfryefarm

good luck, putting a V8 in my pinto was the most enjoyable project ive done and when you do get it finished and get to drive it oh my, well let me tell you its just awesome. But it is a lot of work, but its fun work and its also rewarding in the end. i would buy the carpet its to cheap and looks very nice much faster and easier. as far as pictures go to the additional options on the bottom of your post and attach and browse and choose your pics but you have to resize them to 100kb each.
Smallfryefarms Horsepower Ranch

lateniteauto

Hey,
  New to this site.  Thanx 4 the welcomes.  I have (not-so) recently purchased a Pinto from a friend.  It was sitting out in a field for almost twenty years, so it was CHEAP!!!  My ultimate goal is to keep the whole project that way. CHEAP!!!  This is not my daily driver and I don't expect to get it done very soon.  Perhaps in time for the Pinto Stampede next year.  She is gonna need a lot of TLC, and I am more than ready to do the work. 

  I want to restore/modify this 78 sedan.  I have started by stripping the nasty smelling interior down to the floor pans, and body.  I have removed and refinished my dash.  Got rid of all the rust on the floor pans with a wire-wheel and wire brush. I then used a brush on rust converter to get any small spots I may have missed. Then I shot the entire floor with sound deadening material.  I was thinking of sewing my own carpet, but have seen some links on here for pre-made replacements. So I will most likely go that route.  I know... not cheap, but my time is my money too. Besides I have never sewn a full carpet and expect it to take days not hours. 
  I have also removed the old engine.  After getting it and the battery tray out I discovered a large hole in the wheel well.  I have plans to cut out the bad metal and replace it. 

  If someone could tell me how to post pics I will get a bunch up.