News:

Changes Continue... Scott Hamilton

Main Menu

Mini Classifieds

Looking for oil dipstick and tube 2.3L
Date: 11/23/2017 05:44 pm
Pinto sales literature / magazine ads/ owners manuals
Date: 03/21/2017 07:47 pm
77 Caliper Bolt
Date: 08/21/2018 04:02 pm
72 Pinto Wagon for sale

Date: 12/31/2017 08:40 pm
Looking for Radiator and gas tank
Date: 10/24/2018 07:35 am
Front Body parts needed
Date: 02/09/2018 06:09 pm
71-73 sway bar
Date: 06/12/2021 10:12 am
71,72 Pinto Door Panels

Date: 06/17/2018 08:27 pm
1971 Pinto Do It Yourself Manual

Date: 03/06/2017 01:19 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,431
  • Online ever: 2,670 (Yesterday at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 544
  • Total: 544
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

`78 Pinto

Started by thecustommuffler, February 03, 2012, 09:05:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JoeBob

I have never seen this drip rail treatment
77 yellow Bobcat hatchback
Deuteronomy 7:9

thecustommuffler

Installed starter and the motor spins freely. I squirted some trani fluid down each hole just in case rings were stuck. Next some fuel and a filter and hopefully fire this baby up. I have to get 4 new 13" tires just to drive this thing and have it moveable till the Grand National is done. First thing I have to do is set the bumpers in tight. After that (since I can`t stand them) the drip rails will be cut off. I`ve done this on 2 cars in the past and it really changes the look of any car to a much cleaner look. I`ll post progress pics when I do it incase someone else out there wants to. When you cut them off only cut 1" sections out then weld seam. Spot welds as not to "pull" the metal. Once fully done entire rail, green cookie wheel then brown wheel to get ready for skim and set your edge.

thecustommuffler

Waiting on new style starter that I need to add a wire to just like the 5.0`s. I saw a thread and followed the ebay link to brand new stamped sheet metal for these. KILLER! Does anyone know if there are new stamped door skins out there being made?

thecustommuffler

Starter on order, seems the field coils weren`t up to par. I have to shoot video of this thing running and driving as I plan to sell the motor/trani. Has exactly 63,383.0 on the clock.

thecustommuffler

Also, sorry for multiple posting, but could an administrator change my topic title to `78 Pinto. Thanks, James  :)

thecustommuffler

We haven`t done anything but wash it so no real updates. Took out the never been used spare tire and some padding that was falling apart from under the rear dash into the trunk. The radio just made a fuzz noise so the speaker is probably toast. One head light is out and the flasher seems to be frozen so the blinkers/flashers are not working. Everything else works. The antenna was unscrewed and in the back seat along with the hood prop. Rust under hood lip in front. May not matter since I can cut out that section of support and weld supports in. All 4 center caps are perfect and the color hasn`t faded. I never used a magnet but to me the bumpers appear to be aluminum. Is all the other exterior trim aluminum as well? Does anyone make a roll pan for the rear bumper delete. I do not want it or the front bumper. They stick out way to far.
Ib was reading the Cosworth thread (very cool) and wanted to note that both of my carbs started life as 1050 Doms and flow right at 1300cfm each. I will be starting this build after the `87 Grand National we are doing is done. Motor was just fitted yesterday so it won`t be long. I can`t wait to back half this car and see where I stand with my axle and rim/tire combos.

thecustommuffler

It`ll be minus the dual point (a positive) but minus the dry sump ( a negative). I can guarantee a solid 750 plus range. More than likely will get another 2-3" of carb spacer which `ll kill signal but height will be the goal. It may see a 1/4 mile pass once. Hell, after that tech will shut me down anyway. With the 514 gear, I`m bettin` the fronts will lift without a bounce. 8)

thecustommuffler


slowride

Interesting build, but here's a few things to consider about a 385 series stroker Ford. The cam you're considering will eat itself alive on the street. .750" lift will require a decent amount of seat pressure. A hydraulic (assuming you mean flat tappet) will SMOOTH it out a bit.... I would go hydraulic roller with less lift (and spring pressure) to save the seats. A tunnel ram won't kill HP, it'll kill low end torque and unless you have a high stall converter, it'll be a pig from the light. It might not be the fun you intended on the street.
You might consider going blown as you will have the "Hot Wheels" look (add a chiller if you want it REALLY high), and it would still be somewhat streetable. Maybe lean it out a tad for a little blower surge, but that'll make it less streetable too. Street freaks are fun, but unless their parked, they need some manners.
I look forward to your build!

thecustommuffler

 :P

thecustommuffler

3

thecustommuffler

2

thecustommuffler

pic 1

thecustommuffler


thecustommuffler

I believe this is my first post here and have been lurking for awhile. Been trying to gather up as much info as possible. I am getting a `79(possible`80) Pinto this coming Monday thats all original minus the radio. The lady I`m getting it from has been storing it in her backyard since hurricane Katrina. It was her brothers car and he used it daily then died in Katrina. I`ve been trying to get this car for 2 years and it finally looks as if my persistence paid off. I`ll know when it comes off the hook at my shop, lol. Anyway, my plan is to tub it and stuff the widest possible tires under it that I can find, just short of having Goodyear make one offs. Its my vision of a Hotwheels car in fire engine red. I`ve seen a few on the web and that color on these cars just can`t be topped IMO. I am stuffing my 572 Ford motor that made 1100hp on 92. That was with a full hydraulic setup and dual point dizzy. I`m adding custom spacers that will probably be in the 3" range then my "maibox" scoop. I will lose hp from carb signal but et is not my goal and I could really car less. I want a Hotwheels car thats street legal. Thats the criteria of the build. Going back with a hydraulic bumpstick because its gotta dance at the redlight. Lift will be over the 750 mark on both sides. My 9" I took out of my `81 Cutlass and is spooled with a 514 and 38 tickles on the shafts. This was a twin turbo diesel 7.3 project that I`ve now abandoned. My C4 I took out of my `72 Galaxy with a TRUE 400 so I`m good there. Bytheway, I have the entire complete motor still and its all there factory. Even all accessories and belts if someone needs it. This project will NOT consist of a halo just because they zoop in street cars but custom bent door bars will tie in. I was so disappointed after going to the World of Wheels show in New Orleans last weekend that upon exit I called my shop foreman and told him this week we are getting the Pinto no matter what the cost. So thats that and here I am. I`ll post pics when we get it at my facility. I am going to get it running first to see what works and what don`t. After that the motor/trani and rear end will be up for grabs. I do see that these motors have become popular and love fans. Hell, I hadn`t paid much attention to them since the 80`s and you never see one on the street. Plus I built a `80 Monza coupe and swore I`d never do a small ace car again. At any rate thanks for havin` me and look forward to learning about these cars. My motor pic on the dyno is at www.thecustommuffler.com
Thanks