Mini Classifieds

Great Cruise wagon

Date: 12/17/2016 03:39 pm
WTB - 1979 Fan Shroud - D52E-8246-CIB
Date: 11/05/2020 06:32 pm
Need Throttle Solenoid for 1978 Pinto Sedan 2300ccm
Date: 05/03/2024 05:37 am
Pinto in Maine for sail...solid body

Date: 03/07/2017 07:03 pm
WTB: Factory air cleaner and fan shroud 1971 2.0
Date: 02/05/2020 11:06 am
2.3 pinto carb
Date: 08/18/2018 02:07 pm
72 pinto drag car

Date: 07/08/2017 08:25 pm
Tubing bender 1/2 to 2 1/2 (3) inch roll cage / mufflers and more

Date: 03/13/2021 12:57 pm
pinto parts for sale
Date: 07/25/2018 04:51 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 899
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 513
  • Total: 513
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

beegle55's 1976 Ford Pinto Restoration (FULL DESC WITH PICS)

Started by beegle55, January 09, 2012, 10:59:19 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

beegle55

Well I thought I would share an update...got the ball rolling on price quotes for sheet metal from Fred and have been ordering small parts and tools to help get the project rolling.

Finished disassembling the front clip last night...took the hood and both fenders off and took the bumper off. Underneath the metal all is looking pretty decent...seam sealer in desperate need of replacement and only a pinhole in the passenger side of the firewall which I expected due to the condition of the passenger floor pan and apparent cowl leak. Only one picture for an update today...more to come tonight probably because I plan on taking the door panels off and stripping the rest of the trim from the car as well as the rear bumper and tail lights. Enjoy.

       -beegle55

2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

Last things to do to the car...remove door panels so I can get the door moldings off. Remove tail lights and bumpers. Remove the fenders. And then the parts ordering begins...

Fred Morgan will hopefully be able to supply most of the sheet metal that I need to replace. I'll be sending him a PM shortly to see what we can work out.

Thoughts and ideas appreciated.

     -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

Oh and I forgot to mention...if anyone believes they may have parts that will help my cause for sale feel free to PM me with information. At the moment this is what I am looking for:
-Blue dash pad
-Blue deluxe steering wheel insert
-Blue E-Brake cover assembly
-Good info on who to order a headliner and carpet from
-Middle A/C vent for '76 model

Shoot me a PM with what you have...a may need it or be interested in them for spares.

      -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55











And I'm sorry about the quality of these pictures they were taken in the dark or in my garage so you may need to study them closely to figure out whats going on. One thing is for sure, let there be rust!

Opinions please and thanks in advance!

       -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

And to address the vinyl roof, yes it will go back on if I go with a originality restoration. I like the look of it on the Pinto pretty well. I need the Pinto faithful to chime in on my below findings of the carnage from interior removal last night. All that remains is the dash and headliner which will both be removed soon. Here is the quick and dirty on my findings so far and what the car needs. After my conclusions I've been seriously considering hunting for a better shape and maybe rust free West Coast '76 body (Fred Morgan  ;) ) and using all my good parts (which are plentiful) from this car and switching it all to a cleaner body. Here is my breakdown:

-Needs fender patches both sides
-Needs hood and roof straightening
-Driver side quarter replacement
-Driver side rocker repair
-Weatherstripping
-Passenger side needs minor R&R on the sheetmetal
-Cowl is leaking and needs repaired
-All floorpans need repaired minus the bracing and transmission tunnel
-Inner fenders need replaced
-Spare tire well needs repaired
-Dash pad replaced
-Headliner replaced
-Carpet replaced
-Engine detailing
-Possible engine overhaul (rings aren't sealing and its burning some oil)
-Wheels R&R
-New tires
-New brakes, brake lines and hoses
-Stripped, primed, painted

On to the pictures...

      -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

Thanks for all the kind comments! This site has been a great find just like the cars themselves and it really helps keep you motivated in your project when you have a wonderful group of people to share your common interest with.

To address the questions...yep I still have both my oranges...'79 Sedan and '78 Hatch drag car. I'm also moving on a possible purchase of my uncles '80 Cruisin Wagon although in the midst of three restorations (finishing my '79, this '76, and a '87 Dodge Omni) I really don't need the wagon nor do I want to spend could be restoration funds...but I get first dibs on the car and if he offers it for sale I will most likely buy it anyways  :o

      -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

larjohnson

Great Looking little car there.  I like your idea of maybe making it a Stallion.  Good Luck!!!!!  Larry
Had a 1971 trunk model in High School, wanted another for old times sake, just purchased another in Washington State, very nice restore project.  I also own an all original 1972 Ford Pinto Runabout, one owner, always garaged, with 33,000 actual miles.  Life is SWEET!!!!

dave1987

1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dga57

Welcome back!  Looks like a really nice find.  Do you still have your orange Pintos too?
Dwayne :)
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

r4pinto

I like that interior you got there. Nice diamond in the rough!
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

blupinto

Wow. She must've been gorgeous when she was new. I can see it even through the roughness. I know you'll do the car proud. Are you restoring the vinyl-top?  ;D
One can never have too many Pintos!

beegle55





And I've consider this idea for quite some time and it is tempting but I think I'm still gunning for originality due to the low miles...


      -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

That about does it for the most current before pictures. Those were taken yesterday (1/8/2012) and the following are pictures of the first moments when the car was back at its new home.







2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

beegle55

Hello all...hope all has been well within everyones Pinto world. I myself am embarking on a jouney down Pinto restoration lane with my 1976 Ford Pinto Runabout. For those of you who don't know the car, its a V6 w/ C4 automatic 8" rear with A/C woodgrain leather etc etc...one of the most fully loaded pinto's you could order complete with a vinyl top.

Bought car at an auction house which purchased the car off of the original owner's estate after her passing...33,000 original miles. The downside to its lightly driven history is that it sat for a good while in an area of WV that recieves the most snow in our fine state and from what I can guess it was under a carport with the driver side exposed. It has extensive rust damage to the driver fender, doorskin, and quarter with some creeping in on the rocker. Although it has the cool pop-out quarter windows, those leaky things caused extensive rot in the rear floor pan and I just recently noticed that the cowl must be leaking and my passenger floor board was soaked  >:(

Minus the rust, need of a new paint job and body work, the car drives like new because...well..with the mileage why shouldn't it. Made the 200 mile trip home without a hitch averaging over 25 mpg on the highway from the V6.

I'll be posting the before shots here shortly and then when I get home tonight will upload pictures of my current progress. Hope everyone is ready to answer my questions!

      -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302