Mini Classifieds

Selling off many SVO parts/motors etc.

Date: 07/13/2018 02:21 pm
2.3 bellhousing stick
Date: 07/24/2019 06:50 pm
LOOKING for INTERIOR PARTS, MIRRORS & A HOOD LATCH
Date: 04/06/2017 12:13 am
Wanted Postal Pinto
Date: 09/26/2019 05:31 pm
74 Pinto wagon armrests
Date: 01/18/2017 07:04 pm
Brake rotors
Date: 03/24/2017 09:02 pm
Pinto Vinyl Top

Date: 10/09/2020 10:29 pm
Mint Original Black Rear Seat $275.00

Date: 07/30/2020 11:45 am
Clutch Cable Needed
Date: 04/03/2017 11:03 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,895
  • Latest: tdok
Stats
  • Total Posts: 139,584
  • Total Topics: 16,270
  • Online today: 344
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 265
  • Total: 265
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

On a 2.3Turbo swap I cant seem to find out what parts of the harnesses to keep

Started by Ruger Nut, January 07, 2012, 09:17:56 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ruger Nut

Thanks I appreciate the responses. I went to the sites you listed,  am considering the RJM wire harness,  seems less confusing,  also do I need th TC constant control relay box for the harness?  If so what is the # on the CCRelay I need

fast64ranchero

71 Pro-Street pinto 2.3T powered
72 Treasure Valley Special 26K miles pinto
72 old V-8 parts Pinto
73 pinto, the nice one...

Wittsend

OK, this is my limited knowledge on the earlier setups. There is switched 12 volts needed to the computer. Possibly you could use the power (+) to the Pinto coil, but beware because there could be a resistor in the wiring (not sure).

There is also "keep alive" constant 12 volts needed to the computer.  There is a feed that comes off the computer to trigger a relay to power the fuel pump.  I could be mistaken, but I think most everything else runs to the engine and associated components.

It might get a bit tricky with the sensors for the engine and those needed for the gauges (I'm thinking water here).

Make sure you harness (and associated sensors) match the pin outs on the PK computer. Bill use to be great for information on the swap. I think he is mostly over at turbopinto.com now.  You should check there.  Also the Ranger Station and NATO (put Thunderbird in the search) have a lot of stuff.  It has been nearly three years now and I've forgotten half of what I use to know.  :-( 

Hope it gets worked out for you. Here's a picture of my wiring Nightmare using the TC steering column!

Tom

Ruger Nut

Thanks for the replies,  The particulars on my set up is as follows:  I have a 79 2 door glasshatch, It had a 2.3L , standard steering , standard brakes, standard transmission, I removed the A/C system,  I wasn't for sure if it was factory or dealer install, it needed more repair than I wanted so was removed it .  I plan on and have crossed referenced the 84-86 alternators and they matched, I have a 85-86 T/C 2.3L turbo , 2 wire harnesses  and a PK computer, we have swapped  the pans relocated the dip stick , made clearance for the o2 sensor and turbo by relocating the battery, new motor mounts,  new flywheel, which also crossed the 84-86 T/C flywheel, new hi volume oil pump, since we had the pan off anyways, sealed everything back up , new water pump, thermostat , and timing belt, new plugs and plug wires,  put everything back in TDC  timing, all rubber hoses have been replaced, along with all vacum lines, modified the 79 alternator bracket for it fit the Turbo motor.  We have reinstalled the old 4 speed for now, eventually I'll have a 2.3 T5,  I have a replacement 78 Pinto 8" w/ 3.40 gears soon to be swapped when we get the motor running,It will be cleaned and set in place with all new brake parts and new seals and gaskets along with new leaf springs. The stopping point is where we're  at,  is changing all fuel lines to high pressure FI hoses, and a electric fuel pump w/ inline FI fuel  filter.   We have matched all plugs and descerned which plugs go where on the motor  ,  in a nut shell thats as far as we got.  What to keep and what not to on the orignal 79 harness and where and what to splice on Turbo harness is what I'm struggling with,  my Email is      brockie135@hotmail.com      any help will be gladly appreciated.   Thanks!!

Wittsend

Hello,

  The problem with these swaps is what year Pinto and what year engine/computer/harness are you using? That would be helpful to get someone with your configuration to reply.

This is not going to likely be much help, but I used the 88 Turbo Coupe harness in my 73 wagon.  I thought I would simplify the difficult by transferring the Turbo Coupe alternator, harness, fuse block, relay box, and for that matter the steering column.

What a NIGHTMARE!  I spent days upon days figuring out what I didn't need as there are hundreds of wires (ABS, Ride Control, etc.). As it is I still have about 15 "not sure" wires. I've looked at wire diagrams until I was going blind. I must have crawled a few miles just tracing wires ( I had the T/C harness one the ground).

And frankly it still isn't right. The car runs much better (but still not right) with the spout removed.

A lot of people say the Merkur harness is best because it was intended to be a stand alone.  But for the 88 engine I think I recall some wires missing and pin outs on the computer that need to be reset. So, I recall the Merkur harness being best for 86 and earlier.

So, sorry to say there is no simple solution.  Hopefully by posting the particulars of your setup some one with similar will reply.

Tom

Ruger Nut

I dont know how to PM on here.  I would gladly post my email addy if that would help?

nothingtodo

if anyone sends me a message, I can send you my notes I use to have on my website on how I did my Pinto swap.

Ruger Nut

I know this seems repetative , but i'm at wits end . the wiring and the harnesses have got me stumped.. PLEASE  did someone do a step by step write up or post on how they did their swap. it seems as though there wont be room for both harnesses under the hood,  all the swaps I've seen on pics look clean non hacked.  I mean I would pay a nominal fee for there notes on the swap step by step . We've got the motor in the car now getting ready to hook up the inline electric fuel pump and splice into the fuel lines, all new fuel injection high pressure rubber lines.   What do I get rid of on the wiring and what do I keep, will I still use the old regulator or what?  Pleases help!!!!!  I'm not stupid   just   stumped.