Mini Classifieds

1976 Pinto

Date: 10/24/2017 02:00 pm
1980 pinto wagon for sale
Date: 12/11/2017 12:13 am
1978 Squire wagon 6 Cly
Date: 02/16/2020 05:42 pm
1971 2.0 valve cover
Date: 01/25/2019 07:09 pm
2 Station Wagons for sale
Date: 04/20/2018 11:10 am
Bellhousing for C4 to 2.0 litre pinto
Date: 01/30/2017 01:48 pm
1980 cruising wagon ralley

Date: 07/12/2019 01:41 pm
Need 4 wheel center caps for 77 Pinto Cruzin Wagon
Date: 10/03/2018 02:00 pm
2.3 turbo intake (lower)

Date: 07/15/2020 09:29 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
  • Total Members: 7,895
  • Latest: tdok
Stats
  • Total Posts: 139,581
  • Total Topics: 16,270
  • Online today: 1,293
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 1111
  • Total: 1111
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

So, you want to build a Turbo Pinto Part 2

Started by Wittsend, March 27, 2009, 12:41:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

dave1987

Very nice detailed write-up, both parts! You deserve a +1 for your efforts!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Wittsend

Exhaust?

I opted to use the stock turbo coupe exhaust – for now.  It was a split dual and I had to pinch off the drivers side and discard it.  There is no room with the gas tank and fuel pump to go out on the drivers side.  I had to dimple some of the frame rail and tweak the pipe some for a better fit.  I retained the CAT and only run the muffler to the rear end.  I used modified CAT mounts to support it.

What transmission?

T-5's came with most manual turbo Ford 2.3's.  A  D-9 supposedly came on the Merkur.  It has been stated to be a lesser transmission.  The 87-88 turbo coupe T-5's used a hydraulic clutch system.  You need to adapt to a bellcrank style.  There is a straight pull bellhousing, for the T-5, but I am unsure about it.  I believe it was from the Merkur.  If your car was originally an Auto you will need the manual pedals (both) and the clutch cable. Note, I was told that there are four kinds of pedals. 1973 and older are one type.  There were supposedly three different 1974 and up pedals.  If you had a brake booster, it took one type.  As a final note the turbo coupes came with a very low (close to 4.00) first gear. A V-8, T-5 is not a direct bolt in because on a different input shaft.
Most people don't use an AOD automatic 4 speed. I'm not sure why.  Most use a C-4 automatic 3 speed.  The C-4 requires a limited production (1974 only I believe) 2.3 to C-4 bellhousing.  You will "pay" for it.

Clutch cable attachment?

  There are crossmember clearance issues (at least on the 1973 and older cars) with the clutch cable when using the bellcrank bellhousing.  I fabricated an adapter out of 3/8" steel that relocated the cable slightly higher and to the outside of the car.  This required bending the bellcrank lever slightly for alignment.

Transmission mount?

I found that reversing the main transmission mount and slotting the bolt holes as far back as possible allowed me to use the Pinto C-4 mount on the T-5.  I am finding it a bit soft and considerably flexing.

What rear end?

Some Pinto's (mostly V-6) came with 8" rear ends. If your Pinto has the lowly 6-3/4" (a lot do) you should replace it.  The Pinto and the Mustang II 8" rear ends are the same. Get all the mounting pad stuff with it because there are differences on the positioning hole.  My 6-3/4" drums did not fit my 8" rear end.  The center hole was too small.

What ratio?

The Pinto, Mustang II 8" rear ends came in 3.00, 3.40 and 3.55.  It is my opinion that a 3.25 ratio would be ideal for street use.  I had a choice of 3.00 or 3.55.  Mileage was a factor in choosing the 3.00 as well as the previously mentioned 4.00-ish first gear of the T-5.  Remember your desired tire size should dictate what ratio you need. UPDATE - I found the 3.00 to not work well. It didn't affect the acceleration as much the car was just at the wrong RPM for most standard speeds. I swapped in a 3.40 and have been rather happy with it for general driving.

What driveshaft?

Every application is different. I can tell you that a C-4 to 6-3/4" driveshaft is a direct bolt in for a T-5 to 8".  Measure and seek what is needed.

What heater fan?

  There is a clearance issue between the 90 degree turbo outlet and the standard heater fan.  Many people opt for the A/C version heater because the fan mounts inside the interior, not the engine bay.  Many fans are adaptable.  I found a stubby MG fan that gives the needed clearance and was easy to configure.  The cage is smaller too and has to be run backwards (reverse polarity), but moves a lot of air.

Other factors?

  I spent forever filing holes into slots for the engine and transmission mounts.  I wanted them to be adaptable.  I have minimal clearance on the steering rack, but still the hood touches parts of the engine even after filing the known areas (throttle body and vacuum fitting). The angled fitting for the vacuum line is the most likely place to hit.  I got one from a 2.3 Mustang that has a tap off the side instead of the front.  Still I had to grind as much as I could off it for clearance.  With all that there are places at the top and bottom that still likely have no more than 3/16's clearance!
The shift lever needs an adapter to move the lever back a number of inches.  For me the stock location is too far of a reach.
  I wired in a clutch switch for starting safety.  Hooking up the cruise control required some fabrication for the system to disengage it when using the clutch and brakes.

  What it took?

I paid $850 for my Pinto and it cost me $425 to trailer it home.  I drove it stock for about 7 months.  I teach and have the summers off.  I would say it took me about 30 hours a week for 5 months to get it to the point of starting the motor as a turbo/5 speed car.   There is still much more to do.
  I owned the donor 1988 turbo coupe outright. I paid $1,500 for it as a salvaged vehicle (hit in rear) when the going rate was $6,000. It was my daily driver for 10 years before it marginally failed smog and I parked it.  During its use my wife was hit while driving it, and we got $1,400 from the insurance.  Hence it was my 10 year, $100 daily driver.
  I figure for the engine, transmission, steering column and other associated parts I got about $800 in parts off the turbo coupe. With a bit of thinking there are a lot of Pinto or turbo coupe parts that can be reused on this project.
  I sold the remaining parts of value for $230 and gave the body shell away for scrap. 
 
   I purchase the 8" rear end (drum to drum) for $116.  The radiator was approximately $22, the motor mounts were about $20.  The alternator bracket was $4 and the fan belt $1. The clutch and brake pedals were $12.  The bellhousing (with fork and throwout bearing) was $16. The clutch cable was $6. The fuel pump was $11.  So, it was only a bit over $200 to purchase everything I needed to do the swap.  Add $100 for the donor car and it is about $300.  But I sold extra parts for $230 so the cost was about $70 for the whole swap.  Now to be realistic there were probably $100 in incidentals, but still that is crazy cheap. I have purchased other things for the Pinto, but they were not necessary for the swap.

So, there is a rundown on the project.  Did it seem a bit long to read.  Good, now you understand. It takes a whole lot longer to do.  I'm not trying to talk anyone out of it, but I am trying to let you know what you are getting in to. As with anything of this nature - YOU DO AT YOUR OWN RISK. All the best.
Tom