Mini Classifieds

Crane Cam
Date: 02/26/2018 07:50 am
Accelerator Pump Diaphram for 1978 Pinto
Date: 09/03/2018 08:58 am
Early V8 swap headers, damaged, fixable?
Date: 10/25/2019 03:30 pm
1980 Pinto w/ Trunk
Date: 08/10/2022 04:09 pm
72 Runabout Sprint Edition

Date: 04/25/2018 02:51 pm
76 pinto sedan sbc/bbc project for sale $1700 obo

Date: 03/27/2017 10:07 pm
73 2.0 Timing Crank Gear & Woodruff key WANTED
Date: 09/01/2017 07:52 am
parting out 1975 & 80 pintos
Date: 10/31/2018 12:00 pm
Early V8 swap headers, damaged, fixable?
Date: 10/25/2019 03:30 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 547
  • Total: 547
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Finally Driving the Beast !!! But before i do, end up ruining something...

Started by 71hotrodpinto, June 16, 2009, 01:17:29 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

smallfryefarm

Thanks for the tire info, i can roll round the mickey thompson till then.
Smallfryefarms Horsepower Ranch

71hotrodpinto

I forgot to mention that i found a very reasonably priced front Valance on from Miller Parts in NY $90 shipped. Sanded down the old 30 year primer and then rattle canned some Yellow paint that was "close" (Ha ha!) I then pulled the fender back close and bolted it up. Took some persuasion on the drivers side fender but got it to go. Almost cant tell.
It will do for the next year or so!


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

71hotrodpinto

Thanks man!
Heres the place you should get tires. Tire Rack can get them but they apparently wont ship till 10/16 though.
http://www.tirerack.com/tires/Compare1.jsp?width=295/&ratio=50&diameter=15&skipOver=true&y=15&ratio=50&skipOver=true&width=295/&diameter=15&x=114&startIndex=0&search=true&pagelen=20&pagenum=1&pagemark=1&RunFlat=All

The shocks i have are some near worn out konis. Bought them 14 years ago. KYB's are a great alternative or AFCO street 50/50 shocks could work well but i never verified it.

Yah time , a limited resource LOL! Dont get too discouraged if you dont get out there for a couple of months at a time. Or if you run out of money. Letting it sit isnt going to cost while you build up a little capital.

Ill be back at it when i save the near 200 for the suspension work i need to do.
Bump steer kit 150
Change tires, 60
Alignment     65 or so.
money money money ,SIGH!!   


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

smallfryefarm

YEHAWWW. Glad to hear you got to drive her. I like the 303 cam myself great sound good response. I am about ready to get tires for mine been squirling away a few dallors at a time. I am going to try the 205/15s on the front to. Need 295/50/15s for the back was wanting BF Goodrich but cant find them any more looks like i am going to have to use mastercraft. What front shocks did you use?
Coolant leaks zoop, i use indian head shellac. Would be nice if you could drain it down about half and pull the studs one at a time. You need to move to WV we just pull the plug catch what we can.  :lol: Have any old oil the neighbors use it to poor on the driveways to keep the dust down. Any ways glad to hear you got to enjoy it. I hope to get some time to get on mine soon.
Smallfryefarms Horsepower Ranch

71hotrodpinto

 Hello all again,
Drove it to work! Its a 25 mile hike on the freeway and it was an experiance!LOL
First im holding the hood down with a ratchet strap from underneath. I thought it was ok only having one side strapped down but as i got on the freeway the passenger side was flapping up and down about 4 inches!! So i slowed down to about 50 55 mph to avoid loosing the hood. Its very darty as i said preiviously so its to the alignment shop before i take it back to work or on any frw journeys.
On the plus side the temp in the summer heat is a solid 190 to 210. So things are working pretty good. And it hauls buttox!! Not so much on the fwy but from stop sign to stop sign Woohh.. And she aint tuned yet. Still abit lean during around town driving.
However it has the perfect sound at idle. Ohhh Yeahhh!! bumpaba bumpapa bumpaba bumpapa! Car shaking all over the place LOL!! For hydraulic Roller cams that are easy to put in and go the ol B303 Ford motorsport cam is hard to beat. Has the perfect idle, super fast throttle response and easy on the valve train.
On a fun note a buddy at work has a 84 SVO Mustang and he road races it. Hes got a serious turbo 4 banger detuned to around 300hp for the class hes running. Hes dumped a ton of cash and time into his car and is a sweet ride (hell the roll cage he has in it is nicer looking than my engine LOL!) Hes had a thrown rod, cracked head, defective Esslinger aluminum head, etc etc. So hes pretty comitted to his car in the current state. He got pretty discouraged and almost ripped out the engine and went 5.0 with it. But he perservered and not its pretty rock solid. THE FUN PART. He comes up to me yesterday and tells me
"Mann you got me all messed up!! I Looove that sound of Flowmasters and that cam! After hearing your car i almost asked to trade drivetrains out with someone else!! Man that soounds great!!"

That felt great to hear i tell ya. Really respect his opinon.

So now its going to sit abit while i gather up the cash for front suspension work. I need to get a bump steer kit, get my tires changed out to the 205/60/15s 245/60/15s and then change out the lower control arm bushings. Id also like to mount my 1" sway bar as well. Then drive it to the alingment shop. There is a guy in Chatsworth Ca, that specializes in old Mustang suspensions. He's apparenly Top notch and quoted me a price for the pinto of $65 to $85. Not bad considering that all the tire places want 60 plus they wont touch a old scool car anyways if it needs caster camber adjustment. the place is here http://www.fly-ford.com/index.html

I have some coolant leaking issues as well. The outside head studs are leaking alot. I used some ARP teflon paste and i thought i had the perfect sealant. HA HA. Jokes on me. It seals great on tapered threads but for head studs this stuff is crap. I should have used some silicon sealant. Now i have to hope that some ceramic radiator sealant will plug them up. See the later 5.0 roller blocks have through studs while the earlier blocks have blind holes. Oh well. its going to have to stay for now. Pulling the studs would include the headers as well and draining all the coolant as well. Stuff i just cant do here.

Lastly for reliablity i have to replace the solenoid on the starter. a used CSR pro platinum and its a sticker.  Click click click click click VAROOOOMM! Or sometimes just VAROOOM!

Always a work in progress but now i can drive it from time to time YAHHOOOO!


95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil

smallfryefarm

So sorry to hear of the damage. But at least your driving. No you will have a chance to work those bugs out. Dont get stressed just do them one at a time. You will get em.
Smallfryefarms Horsepower Ranch

71hotrodpinto

Hey there, Well kind of a update and a sad story for me.
After near 7 years I finally drove the car tonight Yay!

But in the process of towing it out with the strap to the street, my perfect front valence and the left front fender is now trash.

See I had to tow it out of my apartment so I could run it long enough to check the trans fluid (now way to high BTW). In the process I told the wife to stop by giving her the "stop" hand through the rear window. Instead of stopping, she just slowed, ran over the strap and then it proceeded to try to tear off the front valance and buckled the fender where it bolts to it.
Prett much all my fault as i should have told her to slow us with the pinto brakes to keep the strap tight ,and also i thought id be smart and run the strap through the valance to the "hook loops" that are right behind the front bumper bracket to keep the strap from bending the valence up in the first place. Well it worked good. Till she ran over the strap.  :'(

Now i need another perfect front valence and now a "perfect" L front fender. SIGH!

Im having other issues also. Its not wanting to start. "Clik clik clik"
It has a CSR High performance starter, big cable to the starter from the trunk, and all good connections. Also the Ford Solenoid is gone completely as I took it out when I rewired the car. So thats not an issue. Now its probably the CSR starters solenoid!! ARRRHHHHGGG! Of course that one is down on the starter where its hard to get to.  :mad:
However when it finally decides to engage it fires Right up.

Still have to hook up the "coolant can" cause she pukes up good once its warm with a full radiator.

Have to get it alined as it veeres back and forth on the freeway.

So far cooling seems to be working. Gets a bit warm at 200ish idling, but once at over 30mph it gets near 160. So far at night.

The old mallory tach im not sure about. Seems a bit off, plus it hung up for a second or 2 after reving it a few times. I Have nothing to compare to though. (Id like a neat Ford script Auto Meter one anyways)

With my tailpipe plugs in it wants to run hard but you can tell it feels a bit dragged down. Im going to pull them off next time out when i get out to the street.

Need to install my front anti roll bar as its wishy washy while changing lanes.

I have to tell you guys that i thought id be waaaayyyy more elated to drive this thing, but instead im just stressed out to the max cause im afraid that something big is going to go wrong. LOL

Oh yah and i have to come up with a hood latching system as im trying to keep the hood clear of hood pins. God thats going to be tough!



95' 302,Forged Pistons,Polished rods
B303,1.7 Rockers,beehives
'68 port/polish heads                   
Coated Must II headers
Edelbrock Airgap
Holley570,Msd dist,CraneHI6
Mil