Mini Classifieds

ford pinto door panels
Date: 03/20/2022 07:51 pm
1973 Pinto hatchback for sale

Date: 11/13/2023 11:30 am
71/72 Pinto front end bushing kit
Date: 02/05/2017 09:45 am
2.3 front sump oil pan
Date: 07/24/2018 03:17 pm
Seeking 1971-1973 Rotors
Date: 04/08/2021 12:23 pm
2.3 engine mounts,glove box parts,emblems,hatch,doors,hinges etc
Date: 08/26/2018 06:35 pm
99' 2.5l lima cylinder head

Date: 01/13/2017 01:56 am
72 Pinto
Date: 03/07/2019 12:07 pm
Free 2.0L Valve Cover

Date: 01/03/2023 04:27 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,137
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 824
  • Total: 824
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Converting to power steering

Started by Reed, October 08, 2008, 11:24:00 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Reed

The car still have the factory steering wheel.  I think these later Mustang rims just create too much drag for parallel parking.  At speed and even low speeds it is fine, but even I have to exert some effort to park it.

I am pretty much decided on finding some different rims, but i need to save up the cash.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

discolives78

I agree with oldkayaker's last point! Don't install a steering wheel with a smaller diameter!  I regret this decision because (1)  the car is harder to steer   (2)  I'm kinda tall, the steering wheel blocks the guages and I either have to sit up in the seat to see over it or scoot way down in the seat (long legs too) to see under it. I was in a pinch at the time ( did I mention the old wheel was very cracked) , I hated  the way the factory wheel looked, went junkyarding and left disappointed, had $50 burning a hole in my pocket, went to Autozone and picked out a shiny( :police: I know you'll see this eventually) chrome Grant steering wheel and one of those $10 install kits,  That lasted about 6 months (did I mention I live in the desert)  The sun glaring off the chrome blinded me in almost every direction I traveled,  the bolts on the adapter kit stripped and one day while making a corner the steering wheel turned but the car didn't.  Back to Autozone, this time got a black Pilot wheel (car still has this one)  so I'm not blind and the steering wheel hasn't slipped around yet (3 years, fingers crossed) but I still can't see the guages and the car is still hard to steer!  If anyone has a decent used blue stock wheel or a decent black rallye wheel at a reasonable price, please drop me a pm.  Sorry about the rant,  use a Ford steering wheel!


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

apintonut

reed i do have a set of stock pinto mags!
but call these guy they know it all when it come to steering and handling
http://www.flamingriver.com/index.cfm
74 hatch soon to be turbo 2.3
73 sedan soon to be painted
stiletto parts(4 sale)
79 pinto wagon & beentoad
wtb 75 yellow w/ black int. (rally?) like profile pic.

Reed

Thanks!  I will keep my eye out the next time I go junkyarding.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

douglasskemp

Quote from: Reed on October 09, 2008, 10:08:30 AM
Thanks!  After some e-mail discussion with Fred, I am pretty sure I am going to leave the manual steering alone and find some skinnier rims and tires.  If I could find a set of 15x4 drag racing skinny rims I would be happy.

There are doughnut spares that are aluminum and look a bit like centerlines. They are 15x4.  I think they came in some Mustangs?? Licketysplit is selling 2. http://www.fordpinto.com/smf/index.php/topic,9498.0.html
The Pinto I had I gave to my brother. The car was originally my mom's, (78 red Pinto sedan with a 2.3 and a 4spd.) I am originally from Tucson, AZ but moved to Oxnard CA :D
I'm looking for a Pinto wagon with an automatic.

Reed

Thanks.  I knew it would be a tight fit.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

phils toys

Adding  ac and powere stearing  takes a lof of  room  . The powere stearing is under the  alt on the driver side and the ac  is very low under the smog pump on the pass side . The v6 cars almost have more room  than mine with all the options
2006, 07,08 ,10 Carlisle 3rd stock pinto 4 years same place
2007 PCCA East Regional Best Wagon
2008 CAHS Prom Coolest Ride
2011,2014 pinto stampede

Reed

Thanks!  After some e-mail discussion with Fred, I am pretty sure I am going to leave the manual steering alone and find some skinnier rims and tires.  If I could find a set of 15x4 drag racing skinny rims I would be happy.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

oldkayaker

Adding power steering to a 71 would be a LOT of work.  The 71-73 models never had power steering as an option.  To add power steering, it would probably be "easiest" to convert to a 74-80 suspension.  This would involve swapping all the bolt on parts plus replacing or modifying the crossmember (cutting and welding).  I believe the 2.0L never came with power steering as an option, so custom pump brackets would be needed (more cutting and welding).

The manual steering will never be as easy as late model power steering.  To minimize the manual steering effort, I believe the following items should help:

  • Keep the car rolling while turning as you mentioned.
  • Reduce tire traction (reduced tire diameter and/or width as mentioned above, harder tire compound, higher tire pressure to some extent, etc.).  Reduced traction is not the safest way to go, so use common sense as usual.
  • Reduce the caster setting.  This is also a compromise but with directional stability, so do not go too far.
  • Minimize the scrub radius.  Center the tire contact patch on the suspension wheel vertical pivot axis.  If the patch is inside the pivot point, spacing the wheel out should help.  If the patch is outside the pivot point, you would need wheels with more negative off set.
  • Do not install a steering wheel with a smaller diameter.
Jerry J - Jupiter, Florida

Reed

Thanks guys. 

Fred-  I may take you up on that offer in the future, but right now money is tight.  I hope to get my financial situation straightened out in a few months though.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

discolives78

Not sure about air conditioning making a difference, none of my cars ever had it. I know the smog pump setup was the same between the p/s and non p/s cars, I hope some of my info helped


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

Fred Morgan

My daughter bought 185 tires for her 71. She came home for a few days to play so while she was here I took car and had 175 installed. I just told her I bought new tires for you. She drove car into town when she got back she told me car steers easy. My pinto tires I have 155, 165, 175 and 185 - 13. If you do decide to go ahead I have all the parts. I will see if I can get picture of pwr. rack so you can see mounting diferance.  Fred     :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

Reed

Unfortunately (depending on how you look at it) a previous owner of the Pinto swapped rims to some late model mustang rims.  I believe the rims are 15x6 or 7 and it currently has 215-60-R15 tires.  I will admit that even when the car is moving at low speeds the steering effort is noticeable, and I am a pretty big guy.  I know my sister would hate it (she hasnt ever driven the car yet, just said it was cute and she wanted it) so I really want to switch to power steering.

So it sounds like I need to find a Pinto/Bobcat with power steering and get the steering pump, pulleys, brackets, spindles, rack and pinion, and ????.  Would having A/C make a difference for the brackets?

Would it be easier to switch to narrower rims/tires?

Thanks.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

discolives78

I agree with tire width. My car has p185/60r14 tires on the front and because of the desert climate the original steering wheel was beyond hope, so I put in an aftermarket steering wheel which is smaller in diameter than the original, Once you are moving at a decent speed, steering isn't a problem, but parallel parking takes a little muscle.  I had a 78 wagon with factory power steering a few years ago and considered the swap, but almost everything was different on the two cars, all the brackets, the one with power steering had two grooves in each pulley and used two belts instead of one, so all the pulleys would need to be swapped.  The rack leaked, and all the front end fittings were worn, so I decided not to do the swap.  Both my cars were 2.3 liters so I don't know what else it would take to do the swap to a 2.0


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

Fred Morgan

Reed stay with stock tire width it will be less work to park car. It would be a lot of expense and labor to install late mdl. pwr. str. + you will need to change spindles due to larger ball joint. But hey anything can be modified.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

Reed

I have a 71 Pinto with a 2.0 motor.  Right now, it has maual steering.  i don't mind, but someday this car will be my sister's daily driver.  i would like to convert it to maual steering.  I am also going to be installing a dealer add-on A/C system.

What parts will I need to swutch and what cars will interchange to add power steering?  I know I will need a P/S pump, brackets, and probably a power steering rack and pinion, but anything else?  What other cars an I scavenge parts off of? 

This conversion won't happen anytime soon, but I am planning ahead and hoping to scrounge parts for cheap.

Thanks!
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.