Mini Classifieds

Needed, 2.0 or 2.3 motors
Date: 09/30/2018 07:47 pm
79-80 full glass hatch

Date: 01/04/2017 04:04 am
parts needed
Date: 02/20/2017 07:58 am
1975 rear end, 8 inch, drum brakes, and axles, 3.4 gear.

Date: 11/08/2019 10:01 am
Wagon rear quarters
Date: 06/17/2020 03:32 pm
Bellhousing for C4 to 2.0 litre pinto
Date: 01/30/2017 01:48 pm
1979 PINTO PARTS--FREE
Date: 09/13/2022 02:05 pm
Want seals for Pinto wagon "flip out" windows
Date: 08/08/2017 01:44 pm
Pinto porthole exterior trim wanted
Date: 03/30/2021 12:29 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,431
  • Online ever: 2,670 (Yesterday at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 524
  • Total: 524
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Debating on 2.3 Turbo engine swap

Started by beegle55, October 14, 2008, 11:32:22 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

turbo74pinto

i agree with 77turbopinto about that t-3.  although for a bone stock or very lightly modded engine, that ihi is nice with full boost at 2200rpm!  i think 86 was the first year for that manifold...hense the code e6...1986.  but im almost possative the only tbirds that had 35# injectors were 87-8.  i could be wrong.  35s are brown top and 30s are green (i think).
after driving mine, still no where near tuned, i will never go back to a v-8 pinto.  the calm maners of the 2.3 and fuel economy out of boost and the feeling and power of the turbo spooling under boost has me hooked.

bob
Take a job big or small, do it right or not at all.

beegle55

Thanks for the input. However, it has come to my attention that we can't do the swap. We were interested in trading the current powertrain setup in to the guy who but the Pinto intsead of paying full cash back for the car. He is uninterested and his wife has given him two weeks to either get the car or the money so the car is going down the road. I've decided to move on... And I'm looking into a Maverick as my next project and am going to check it out this evening. Once again thanks for the great input.

    -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302

77turbopinto

I guess we have different experiences with these, and it will all depend on the car(s) you find. I have had 7 Turbo Couple donor cars (+2 engines), and I paid $500. or less for most of them. There were 3 that did not run when I got them, and only one of them I did not make run before I gutted it, but I did not even try that one. Out of all of them, only one had a head that was unusable, but the valves can be swapped into a 'Pinto' head. The engine in my yellow car has over 180K and runs great (any comments Scott? Jim?). It came from a good running (but rotted) donor and I did nothing to it before the swap (less the oil pan). IF your donor runs great, I reccamend a new head gasket and valve seals; much easier to do with it out of a car.

I agree with T74P, if your car is set for a V8, maybe a stock V8 set up would be cheaper, and maybe easier. I also agree with a bunch of other things he said too; good stuff. I think you similar power from slightly tweaked 2.3T and a stock V8, but you might get WAY better mileage (maybe 2Xs) with the 2.3T.

IMHO: For an EFI 2.3T swap, a donor car is the way to go. For all the effort, I don't think you can convert a N/A engine AND buy all the ancillaries needed for what you COULD buy a car for (I have seen sellers that think 'rotted to the door handles' T/Cs are made of gold). What year is that prospective donor? The 86 is great, but others will work too. The 86 (my favorite) has a T-3 turbo (WGA on the engine side), easy to use harness, most of them have the E6 manifold, and all of mine had 35* injectors (?).

Glad to hear you still have that nice Pinto.


Bill
Thanks to all U.S. Military members past & present.

turbo74pinto

what does wv require for a 77 (or 78??) to be street legal?  i know its not much up here.  if your cars set up for it already, why not just save your time and money and work with what you got.  slap a set of lower compression pistons in it, get a cheap cam that works with whatever lifter set up you have, dual plane intake and a 600-650 cfm carb and be done with it.  by the time you buy that tc, go over the engine to make sure its ok, go through the wiring, run the wiring, modify for the t-5, switch the t-5 bell to a mechanical clutch (if its an 87-88 tc), youll have a ton of time into it.  plus the money of the doner.  if its an auto, well, that trannys not even worth its weight in scrap if you plan on modding that motor at all.  if its an 86 or older, its got 30# injectors and a small vam.  87-8 had large vam and 35 # injectors.  also, la eecivs had the fastest prossesors and had better timing curves due to intercooling.  la3 (88 stick shift turbo coupe) one of the best to choose from...next to an 86 svo.
you will have better weight but i dont know if that would matter.  it looks like your car is set up for drag racing already.  whats that 150-200 # worth.  that harness (87-8) is also a total pita to swap over.  if i were to do my harness over again, id use a 2.3 vam mustang harness and re pin it.
for what its worth. it took 3 turbo 2.3 heads for me to find one that was rebuildable.  all 3 were cracked and only one was ONLY cracked in the valve seats.  turbo heads are different from others.  if i remember right, the dual plug 2.5 head out of a 2000ish ranger flows the best factory.  but the turbo intakes wont bolt up and the ranger intakes dont flow at all.
dont get me wrong, i love my turbo swap.  i just got it going again and it pulls like crazy.  but your already set up for a 302, why take the trouble to change it?  its your car, time and money.  i just wanted to give you a little advice.  i dont know how much you researched this.  if you really are interested in this swap and end up wanting to do something with the turbo 2.3, check out www.turboford.net.  those bottom ends are good to 400hp stock.  i would also be glad to help you with info that ive researched if you choose to do the swap.

bob
Take a job big or small, do it right or not at all.

71pintoracer

Hey Beegle, welcome back! Glad you got to keep that awesome Pinto, you are on the right track, ditch the race engine and make a driver out of her. The turbo 2.3 is a stout engine and a great swap, with the entire doner car you're set. The main problem I've seen on these cars is a blown head gasket which is no biggie, but a great bargaining tool for you!!
If you don't have time to do it right, when will you have time to do it over?

Fred Morgan

Casey warm it up then do a compression on it. But hey youre dad would of told you to do that. Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

beegle55

  Well, here I am, back once again. I wrote on the site a few months ago that the Pinto was a lost cause and was being sold to help fund my families financial future. But as few might know, I actually still have the car. We are in the process of buying it back. My dad and I couldn't bring ourselves to part with the Pinto again seeing as the rising demand for these cars decreases the chance of us finding a Pinto in better shape.

  After all, ours has no rust whatsoever, its been garage kept all its life. In addition, the car has under 2,000 original miles. The problem is the engine. We aren't able to fund to race the car anymore and the engine isn't something that, without major modification, could be street legalized. So in the process of finding a way to keep the car, I brought up a possible solution. Sell the engine and transmission and start a quick restoration of the car. Clean the engine bay up, redo wiring and interior, and touch up the paint under the hood and under the car.

  The engine would be replaced by a 2.3L turbo and a matching tranny out of a Turbo Coupe setting at a local car dealership. The prospective donor car looks in decent shape, though the front has sustained damage in an accident (possibly by hitting a deer?) The exterior is very solid and I'm going to check on the cars running condition... its been on the lot for around a year or two so im skeptical if it runs or not and if it does, how many miles?

  Just thought I'd share a possible set of plans and give a update.  ;D

     -beegle55
2005 Jeep GC 5.7 HEMI
1993 Ford Mustang
1991 Ford Mustang GT
1988 Ford Mustang
1980 Ford Pinto Cruising- Mint, Fully documented
1979 Ford Pinto Trunk- 2.3L 4 speed
1978 Ford Pinto HB- 302 drag car
1976 Ford Pinto Runabout- 40,000 mi, V6
1972 Ford Maverick Grabber (real)
1970 Ford Mustang 302