Mini Classifieds

2.3 engine and other parts- Free
Date: 12/13/2016 10:25 am
2 Pinto Wagons for Sale

Date: 10/29/2018 02:02 pm
Steering Wheel Needed for 1972 Pinto
Date: 08/08/2018 12:26 pm
79 pinto driveshaft
Date: 08/18/2018 02:03 pm
Need Interior Panels
Date: 07/09/2018 04:59 pm
Accelerator Pump Diaphram for 1978 Pinto
Date: 09/03/2018 08:58 am
windshield
Date: 04/14/2018 08:53 pm
Built and Injected early 2000cc Engine

Date: 04/10/2017 07:30 pm
Tubing bender 1/2 to 2 1/2 (3) inch roll cage / mufflers and more

Date: 03/13/2021 12:57 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,457
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 551
  • Total: 551
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Wheel interchange

Started by Reed, September 14, 2008, 02:51:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TIGGER

I was thinking of converting my 73 to 5 lug and installing some 2001-2004 Mustang Bullitt wheels.  There is a white 72 Pinto wagon currently on Ebay that has them installed.  It looks pretty good but I am not sure how well they fit ???
79 4cyl Wagon
73 Turbo HB
78 Cruising Wagon (sold 8/6/11)

discolives78

I have 14x6 1/2 wheels on my car, front  tires are 185/60-14 and back tires are 205/70-14,  no clearance issues, I got them from a junkyard for $60, no center caps though. These are "sawblade" aluminum wheels from mid 80s. They were on an early 50s chevy pickup that had mustang II suspension. I kept the stock 13 inch wheels and dog dish covers and I have a set of full wheel covers left over from my 78 wagon. I like the factory rally wheels, but its kind of hard to find nice used ones


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

Reed

Thanks.  I have pretty much decided that I will keep the wheels I have unless I can find a set of slotted mags for cheap.   Really cheap.      Like, $5 or under....
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

pintoman2.0

Reed,

Escort wheels will not work. They are 4X4 through 87, in 88 they went to 4X100 metric, I tried those.

I had a friend that had a pair of 17 inch aftermarket spokes with 195-50s  that fit and only rubbed on a hard right turn. They were not mustang backspace though because as was said on Sunday, the fox Mustang has a more or less front wheel drive offset, I don't know the numbers.

Personally I think your wheels are perfect, the only thing better would be the Mustang ten hole LS wheels.

P

Reed

Wow.  I had no idea it was so hard to find rims.  I guess I am lucky that my Pinto came with later model Mustang 15 aluminium "hurricane" or "vector" rims.  I think I will hang onto them for now and polish them up, maybe paint some black accents on them.  Thanks!
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

licketysplit

Hi Reed. A 3 1/2" wheel back space is about all i can put on my 73 and thats only with the right tire! The problem is to much tire over hanging out passed the rim and making the tires hit the braces for the bump stops on the rear of the car! A 3" to 3 1/2" back space seems to work best. As for wheels from other cars? Little or none unless it's a Ford or after market! The Pintos are 4 on 4.25" wheel patteren, as are the T-birds and 4 lug Mustangs. I would stay away from front wheel drive wheels with deep back spacing even if they fit, they maybe alittle hard on front wheel bearings. Howard

Reed

Quote from: apintonut on September 15, 2008, 12:30:16 AM
just let me know when i can come pick up the 71 and get it out of your hair :) its would be  hard ship but ill manage. im just always willing to help were i can.  :) 

Ha ha ha.  Not anytime soon. :showback:
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

demoiowa89r

late 80's audi rims work, but for the front u would have to get 1/16 of an inch shaved off the hub hole. they have some really good looking 15 in. rims. they kinda look like the honeycomb firebird rims..
Proud owner of a 74 pinto sedan. NON-DERBY
a 78 hatch. derby car.
a 73 wagon. derby car.

apintonut

Quote from: Reed on September 15, 2008, 12:22:17 AM
Geez, this stuff is complicated.... ???  I just want a nice lightweight rims that looks good and will give me a slight mechanical advantage over the 13 inchers.  Life was easy when I was messing with Mopars....

just let me know when i can come pick up the 71 and get it out of your hair :) its would be  hard ship but ill manage. im just always willing to help were i can.  :) 
74 hatch soon to be turbo 2.3
73 sedan soon to be painted
stiletto parts(4 sale)
79 pinto wagon & beentoad
wtb 75 yellow w/ black int. (rally?) like profile pic.

Reed

Geez, this stuff is complicated.... ???  I just want a nice lightweight rims that looks good and will give me a slight mechanical advantage over the 13 inchers.  Life was easy when I was messing with Mopars....
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

apintonut

les Schwab is going to be trying some focus wheel on my pinto wagon for me for free. they think they will fit. they are 100$ each which isn't to bad.
they are 17"  and im hoping for 205 50 or 60 r17 im anticipating having to lift it. but we will se ill let u know. though i would like it lifted and stiffer in the back any way.
 
74 hatch soon to be turbo 2.3
73 sedan soon to be painted
stiletto parts(4 sale)
79 pinto wagon & beentoad
wtb 75 yellow w/ black int. (rally?) like profile pic.

Wittsend

"Cool.  So any rim with a four on 4.25 bolt pattern."

Not exactly.  There are offset issues, hub diameter issues and wheel opening rub issues:
1.   I temporarily put my '88 Turbo Coupe wheels (225-60-16) on my '73 Wagon. The tires rub on the passenger wheel opening and the inner wheel well.

2. These same wheel/tires rub on the rear leaf springs (washers, and moving the clamp helped). Not that I recommend washers.

3. I was going to try Escort wheels (same bolt pattern), but the center circle is too small for the front hub (maybe the rear too, I never checked).

So, you need to make sure the hub opening is large enough and the offset won't have the tires hitting the suspension or body. If you look at the picture in my post you will see the wheels I got from the wrecking yard for $30 each.  They even came with 225-60-15" tires.  Unfortunately they have flat spots. I'll probably go with 205-60-15" when I replace them.
tom

Reed

Cool.  So any rim with a four on 4.25 bolt pattern.  So 4 x 107.95 millimeters is the metric equivalent.

Thanks!
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.

Lost Coz

Stock Pinto bolt pattern is 4x4.25. There are several wheel manufacturers that make that bolt pattern in 13 and 14 inch wheels...don't really know about 15's. My 75 wagon has a set of 14x6x4.25 rally wheels and the 73 wagon has a set of 13x6x4.25 Custom wheels. Both have no clearance problems and the 73 is lowered about 2 1/2 inches in the front and nothing rubs.
"Pintos are cool!"

1973 Pinto Wagon
1974 Pinto Wagon
1975 Pinto Wagon
74 Pinto Wagon for parts

75bobcatv6

If its the 4 lug should be 4.25 and if so most ford 4 lugin that time was the same up to like i think 88 or so

Reed

I have searched this site several times and still can't find an answer to my questions.

(1)  What is the bolt pattern for a stock 71 Pinto?
(2)  What other makes and models have a bolt pattern that will interchange?

Given the wide variety of four lug bolt patterns and given that you can't (or I can't anyway) tell them apart just by looking, I would like to know what exactly will fit on my Pinto.  I have a set of later Mustang 15 inch rims, ubt I am not crazy about the looks and want to find a set of ansen sprint style slotted mags in 15 inch diameter.

Thansk.
Looking for:  Rear and side window louvers for a 71 sedan, 15 inch aluminum slotted mags and tires (Ansen sprint style), and an Offenhauser dual-port intake for a 2000cc motor.