Mini Classifieds

1978 Pinto Wagon V8
Date: 04/28/2023 03:26 pm
(3) 1980 Ford Pinto Station Wagon Projects

Date: 03/15/2023 02:16 pm
78 hatchback

Date: 03/12/2023 06:50 pm
Automatic Wagon
Date: 06/14/2019 11:22 pm
Need Mustang II Manual Transmission Mount
Date: 04/21/2017 02:03 pm
74 Driver side Wagon Fender, 74 driver side Door, Nice Wheels

Date: 09/15/2019 08:30 pm
1975 Pinto bumpers
Date: 10/24/2019 01:45 pm
Mini Mark IV one of 2 delux lg. sunroof models
Date: 06/18/2018 03:47 pm
Brake rotors
Date: 03/24/2017 09:02 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 602
  • Total: 602
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Exhaust, how much is too much?

Started by EP73Pinto, September 02, 2007, 10:52:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

turbo toy

The biggest problem I have with this setup is the 1 5/8" -1 3/4" stepped header. The large primaries are entirely too big for anything but a true race engine and are going to kill low and midrange torque.

Mutant pony

It sounds to me like you are pretty close. I think the cam is a little on the small side. Racer Walsh should be able to give you a good recomendation on that. With a milled head, good porting, The right cam, your intake and header you should be right around 200hp.
I just read your other post, Yeah, you should be really close.








'77 pinto,Reinforced stock chassis.2300,courier trans, np205 transfer,9" rear,427/430 gears

Srt

the only substitute for cubic inches is BOOST!!!

Pinturbo75

the only time i get a clank from the exhaust hitting is when i drop the clutch from over 4500 rpm :D  and that wont happen anymore after i do a few upgrades to the rear suspension.
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Srt

Quote from: EP73Pinto on September 09, 2007, 11:49:06 PM
Here is my 3" exhaust. It has a 5" super trap.
I supported the car from the spring perches to show what it looks like with the suspension compressed.

and the interferance between the pipe and the axle tube is apparrent.  if the guy wants mid range big stuff won't help.  if you're running the car on the street the banging and rattling will drive you crazy
the only substitute for cubic inches is BOOST!!!

77turbopinto

Thanks to all U.S. Military members past & present.

EP73Pinto


Pintony


EP73Pinto

Here is a picture of the ground clearence. That is a golf ball used for reference. You can dee where the exhaust got partially crushed when I was trying to load it on to a trailer.

EP73Pinto

Quote from: Pintony on September 03, 2007, 03:10:32 PM
Hello 4CAMMER72,
I would like toi see the photos...
From Pintony
Here is my 3" exhaust. It has a 5" super trap.
I supported the car from the spring perches to show what it looks like with the suspension compressed.

crazyhorse

Quote from: 77turbopinto on September 05, 2007, 03:41:04 AM

IMHO: A good Auto-x car is good as a d/d.

Bill

I TOTALLY agree. if it drives & handles well, it will be an absolute BLAST on the street. I also agree that 200HP from an N/A 2300 is going to be difficult at best. At least if you want it streetable. My goal was always 1hp/cu-in, or 140hp. I think a mild cam & some porting could achieve this reliably.
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

77turbopinto

"200 hp with good power throughout the power band"

I assume you mean that you want a flat torque curve from idle to 6k or so?

Trying to get a N/A engine to a level anywhere near that will take lots time and money. You might not get close to your goals, and the only way to find out is to do it.

I agree with Pintony, for 200HP and a flat-ER torque curve, go with a turbo. From what I have seen, high HP (150+up) N/A 2.0 and 2.3 engines don't have much bottom to upper mid-range power, if any.

IMHO: A good Auto-x car is good as a d/d.

Bill
Thanks to all U.S. Military members past & present.


EP73Pinto

Actually I have a 3" exhaust already installed. It is all mandrel bent and it go's up over the axle. And my car is LOW.  :coolafro: (I  don't think I can drive over a pack of cigarettes with my 20" race tires.)  I paid $180 for my aluminized tubing.  :-\ I cut and fit it myself. Took all day just to do that. And you're right about the Schoenfeld header not clearing the motor mount. I made a custom mount to get around it. I plan on posting pictures soon. I can throw in a couple of pics of the exhaust as well. I'm actually pretty proud of the fit of the exhaust since I'm not a fabricator by trade.
I'm thinking the exhaust might be too big because I don't feel like I have enough midrange. Maybe I've just been spoiled by the 170 ft/lbs that my e30 BMW makes at 3000.
The reason I brought up the cam is I'm not real impressed with the top end either. The power starts dropping off below 6k.
As far as the street drivability, this is a purpose built road race car. No interior (except 2 race seats), and a full cage. I could deal with a difficult car on the street, if it goes like a raped ape on the auto cross. But that gets back to my original post.  I want 200 hp with good power throughout the power band. Any suggestions?

UltimatePinto

I can say from experience that Pintony is right about the motor mount issue. Had to relocate the mount on my Runabout install.

My Schoenfield came with a modified mount/bracket that could have been used but it was all steel no rubber.

Trouble with that is you can't hear yourself think with all the engine noise generated with the solid mount. Had a set of solid aluminum mounts purchased from RW years ago. Will never use again.

Al

Pintony

Quote from: 4CAMMER72 on September 03, 2007, 12:24:19 PM
sorry to disagree, but, i have 3" all the way to the bumper and its over the axle. sam, AKA the whistler on turboford has 3.5 all the way to the bumper over the axle. i did mine with mandrel bends for about 70 bucks plus the muffler at 55 bucks. i can post pics if you need.

Hello 4CAMMER72,
I would like toi see the photos...
From Pintony

crazyhorse

Just remember, Pintony likes his cars LOW. He may well not have room for a 3" exhaust.
Hope I'm not steppin on your toes Pintony.
@stock height I can't see a prob with a 3" exhaust over the axle.
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

Pinturbo75

sorry to disagree, but, i have 3" all the way to the bumper and its over the axle. sam, AKA the whistler on turboford has 3.5 all the way to the bumper over the axle. i did mine with mandrel bends for about 70 bucks plus the muffler at 55 bucks. i can post pics if you need.
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

77turbopinto

"Too much" is only defined with you YOUR GOALS for the car.

Keep in mind that circle track racecars are driven in a different manner than on the street (or as least they should be) or auto-x, and that a race set up might make street driving or auto-x an issue.

Bill
Thanks to all U.S. Military members past & present.

Pintony

Hello EP73Pinto,
I think U will find that the Schoenfeld header will NOT clear the 2.0 motor mount on the passenger side...
Also, U will NOT be able to get 3" exhaust around the axle it will have to go under...

From Pintony

EP73Pinto

I have a mildly built 2.0. It has four 38mm Mikuni side drafts, a Racer Walsh (RW) #2 cam, and about 11:1 comp. I also bought a Schoenfeld header from RW. The header has 1 5/8" primary's that step to 1 3/4 and meet in a 3" collector. I asked the people at RW if a 2 liter pinto can flow a 3" exhaust. They assured me that the circle track guys run this exhaust open and that if I am running a full length pipe (over the axle and out the back) with a muffler that 3" would not be too much. This car is a former F Production road race car (ICSCC) and will be used for auto cross. Therefore I will need plenty of mid range torque. I am thinking of stepping it down to a 2.5" or a 2.25". Any suggestions? Any body run a N/A pinto with a 3" exhaust?
Also the cam grind is: Lift  .450", Dur @ .050" - 245/252. Anybody have a suggestion on a cam that might be better for my application? Thanks.