Mini Classifieds

Need Brakes for 1971 Pinto
Date: 04/27/2018 11:48 pm
2.3/C-4 torque converter needed
Date: 02/08/2018 02:26 pm
sport steering wheeel
Date: 10/01/2020 10:58 pm
76 drivers fender
Date: 07/20/2018 08:24 pm
78 wagon instrument y
Date: 04/30/2018 07:41 pm
1972-1980 Pinto/Bobcat Wagon Drivers Side Tail Light OEM

Date: 04/20/2017 10:10 am
Squire trim
Date: 03/28/2018 10:11 am
1980 pinto wagon for sale
Date: 12/11/2017 12:13 am
Want seals for Pinto wagon "flip out" windows
Date: 08/08/2017 01:44 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 566
  • Total: 566
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

2.0 and 2.3 difrences?

Started by Tude, February 04, 2006, 01:07:59 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Tude

nice hole in the ground, my 83 was a true haus as yours looks, exept i had a 2.3 bored 40 over rods and 20 over mains, straight pipe(4 inch stack for a while), 2 wd, 32inch tires on the back, a home made brush gaurd and bumpers, 60-40 seats out of a 88, and a 4speed i dont remeber the gears it had though.
custom fit hammered and bent


bigh4th

If your truck is/was a 2.0 that is a rare special ordered truck or someone converted it.  Unless they have 3.75 gears, the 2.0's barely have enough power to move those trucks with a manual trans, so I would think AC would make them super doggy.

My dad has an 88 2.0 ranger.  Its just a basic no-frills truck with no ps/pb/ac, no carpet (rubber mat) a bench seat, solid back glass, and no radio.  He added the radio and bench seats.  The only thing "rare" about his truck is it has a 3:75 rear end.   When he got it, it had the "hitatchi" 2 bbl feedback carb on it and it was slow as molasses.  He's since swapped a 2.3 intake and pinto 2bbl on it and it has made a world of difference.  Gets 30 mpg too. And its tough enough to do this:


-Harry

Tude

the main reason i asked is becouse ive got 2 in pintoes and about 5 out of rangers most are sitting on the floor and torn down a little so that i could rob the things i was needing at the time. so it is kind of hard to tell what is what when its not in the vehichal and you dont have the tools at the time to measure fractions of fractions of an inch.

as far as the ranger you described with no radio no p/s no p/b...... that is mine but mine came factory with air conditioning.
custom fit hammered and bent


bigh4th

The easiest way to tell a ranger 2.0 from a 2.3 is to look at the emissions sticker on the radiator support.     :sorry:

Seriously though.  If the engine is carbed and the truck has no power steering, no power brakes, no radio, and is a manual, its most likely a 2.0.  They were only used in the base model rangers (also known as S-model rangers...S is for stripped) and only came with manual transmissions with NO goodies.  They also usualy have a black valve cover instead of grey, like the 2.3

The 83-84.5 2.3's were also carbed, but they usualy always have at least power steering or power brakes.

If it has a weird looking 2bbl carb on it, its an 87-88 2.0 and that carb is probably why you're working on it.

-Harry

Pintony

Quote from: Tude on February 06, 2006, 12:50:59 AM
hmmmm didnt know that 


Well...
That is why you should read carefuly.
This onfo is in my original post on this subject.
Except I could not remember the bore size for the Ranger 2.0 at that time.
From Pintony

Tude

custom fit hammered and bent


Pintony

BUT the Ranger 2.0 is the same exact block as the 2.3. only the ranger bore is reduced .260.
From Pintony

Tude

thats the type of diffrence i was wanting to here more of (rather than whitch motor can in what) becouse i have several rangers and am always working on those 4 bangers but never knew how to tell the diffrence without pulling a piston out and looking at the side of it.
custom fit hammered and bent


turbopinto72

Harry, That is a good point. It is the "quickest" way to tell.  I give Harry a one up for that post.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

bigh4th

the quickest way to tell a 2.0 from a 2.3 is the oil filter placement.  on a 2.0 its close to the front of the engine.  On a 2.3 its close to the back.

-Harry

Pintony

Quote from: Tude on February 04, 2006, 01:31:43 AM
----on a side note---once again sorry bout that pintony i read that post wrong my bad i blew up just a little bit

Hey Tude,
I'm cool with you! Your Cool with me!
I commend you for taking the step back and looking at the problem~
From Pintony

Pintony

Hello Tude,
Any Pinto after 1974 will NOT have the ford 2.0
Any Pinto with the small bumpers will not have a 2.3.
NOW lets say somebody swaps motors in?
The 2.0 has a valve cover that has ribs.
The 2.3 has a mostly flat valve cover.
the 2.0 has curved intake runners and the 2.3 has straight runners.
From pintony

Tude

i know the internal parts are diffrent im asking say you pop the hood and just look with every thing still bolted to the motor(all stock) what are the main diffrences to look for in the two

----on a side note---once again sorry bout that pintotony i read that post wrong my bad i blew up just a little bit
custom fit hammered and bent


Pintony

Hey Tude,
The 2.0 and 2.3 Pinto are totally different.
The 2.0 installed in the Ford Ranger engine is closely related to the Pinto 2.3.
The Pinto 2.0 is a solid cam engine with 3 cam towers.
The Only part that will interchange between the Pinto 2.0 and the 2.3 is the rods and then you will need special Pistons as the 2.3 rod is .200 longer.
The standard 2.0 rod is 5.000"
The standard bore is 3.575 W/3.029 stroke, bore spacing is 4.016
The standard 2.3 bore is 3.780 W/3.126 stroke, bore spacing is 4.137
From Pintony

Tude

i know the bore stroke would be diffrent between the 2 but what are the visible diffrences between the 2.0 and the 2.3

ive been told that when you pull the valve cover off and look the cam the posts holding it straight is diffrent

and the dist is farther back on one

custom fit hammered and bent