Mini Classifieds

2.8 radiator
Date: 10/25/2019 04:10 pm
Mini Mark IV one of 2 delux lg. sunroof models
Date: 06/18/2018 03:47 pm
1971-74 Various Pinto Parts
Date: 01/18/2020 03:44 pm
Pinto Engines and engine parts
Date: 01/24/2017 12:36 pm
4-14" Chrome Plated Wheels 4 x 108 + 0mm offset with new tires

Date: 09/12/2018 12:33 pm
Wanted hood hinges
Date: 02/17/2020 05:30 pm
1971-1975 Pinto
Date: 01/09/2017 04:14 pm
1978 need kick panels and rear hatch struts and upper and lower mounts
Date: 11/29/2018 10:26 am
free transmissions
Date: 11/28/2019 10:21 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 628
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 581
  • Total: 581
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Paint the Pinto, ..

Started by webmaster2, October 04, 2003, 05:22:01 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

oldkayaker

The new paint and chrome look great.  Even the under side of the hood is shinny almost like it has been waxed.  I can just imagine the pucker level you experienced installing the engine without scratching something.  Curious to hear how the new AC compressor works out (i.e., smoothness, power load on engine) versus the original York compressor.
Jerry J - Jupiter, Florida

dianne

That looks fantastic!!! WOW!!!! That was certainly a different yellow from the factory that I put on my car LOL

Looks great Scott!!!
Vehicles:

- 1972 Plymouth Duster (To be a Pro Street)
- 1973 Ford Pinto wagon (registered ride 195)
- 1976 Mustang II mini-stock
- 1978 Mustang King Cobra II
- 1979 Ford Pinto Runabout
- 1986 Chevy K5 Blazer
- 1997 Suzuki Marauder

FORD: Federal Ownership Respectfully Denied

74 PintoWagon

Art
65 Falcon 2DR 200 IL6 with C4.

Scott Hamilton

Well... After utilizing my motor for the yellow pinto to fix an issues with the green one... I finally put the rebuilt engine in my yellow pinto today... Finally!!

Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

r4pinto

That looks really good Scott. Talk about mad skills. Wanna work on finishing Harold II up for me? I've only been working on her since 2005  ;D
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

Scott Hamilton

Well, I'm finally updating this thread after so many years- I have the engine (#2) for the yellow runabout almost ready to slide in. The first engine I had built was put in the green runabout, I ended up rebuilding the green runabout's engine for the yellow... I found out last week that the compressor mount I had for years is for the drivers side of the engine and not the stock side as I had thought. If I can find the stock york compressor mount for the passenger side and the alternator mount for the drivers- I will not need this mount. I have a stock air handler (Purchased from Kevin Gillespie) that was rebuilt by classic auto air in Florida many years ago that I'm routing all the vaccum lines  now for installation hopefully soon. I need to find an idle solenoid for a Weber DV carb.. Anyone have any ideas?
I don't think I will be ready for the Stampede in a few weeks but if it was not for the first and now the second I don't think I would have been this far-
It's not a cosworth but I'm excited about making progress.- ;)
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

bday

Hey Scott; I did a mild restroation on my pinto drag car; but I did not remove the glass because of not being able to find gaskets  and/ or glass if one would break. I really need to put in a new head liner, & I need to take out the glass to fix a small leak on the back window. Any help on this would be greatly appreciated.

Bill  U/S pinto 1219

r4pinto

How much does rechroming cost anyways?? I'm hopefully getting a 72 Pinto sedan, but even if I don't I'll want to get the chrome redone on whatever car I get, as it won't look too good on a refinished car, since I plan on getting any Pinto to restore.... I'm just hoping the deal for the 72 doesn't fall through...
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

WVBobcat77

Man!!  It must have cost a ton to get that stuff rechromed.  I had 8 SMALL peices I wanted to get done and it was going to cost over $400.  No way I could afford that, so I decided to get them powder coated the same color of my accent stripes.
Bill in WV

1977 Bobcat
1978 Pinto - V6 Sedan

Scott Hamilton

Well, I have picked up the chrome & it looks Great!
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

gpinto2

It must be nice to have a backup Pinto!!!!,looks like you got 1 month down Scott
1972 Pinto 410,C-4

Scott Hamilton

Here's another shot of the chrome load,

Notice the plate, KABOOM, my wife's idea..
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

Scott Hamilton

Well, they have the car stripped & I'm taking the chrome to get it redone, here is a Picture of my Green runabout loaded with my Yellow runabout's chrome.
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

turbopinto72

Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

71pintok

I remember when my car went for a major paint job and a v8 swap it was gone 6 months i couldn't sleep very well! Your son must have been upset.

WVBobcat77

Is that a Weber I see?  I want one sooo bad.  :'( But alas, way too expensive.

Bill in WV
Bill in WV

1977 Bobcat
1978 Pinto - V6 Sedan

crazyhorse

Are you going for "absolute authenticity" or just want to get the aggravating thing in?. If you just want it in you can tie a string through the t-stat and assemble the housing like normal , using the string to keep it in place. Once it's in pop the string in two , and pull it out.  As far as a keeper i've never seen one, but the pintos are almost as old as i am :P
How to tell when a redneck's time is up: He combines these two sentences... Hey man, hold my beer. Hey y'all watch this!
'74 Runabout, stock 2300,auto  RIP Darlin.
'95 Olds Gutless "POS"
'97 Subaru Legacy wagon "Kat"

Scott Hamilton

It will be at the shop for 4 1/2 months...

Does anyone know or have a replacement for the thermostat keeper, the wire 'ring' that keeps the thermostat in the housing?
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

Scott Hamilton

Here is a picture of the engine I have been working on in my spare time for 2 1/2 years,....  Mallory electronic dist, esslinger adjustable cam gear, warm cam (don't rember the specifics, ebay find), new preformance carb, hooker header, offie 2 barrel intake, ... I also have a complete air conditioning system I purchased from Kevin Gillespie & rebuilt by classic auto air in Florida.
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)

gpinto2

Scott,how long do they say you will be without your little Pinto? :'(
1972 Pinto 410,C-4

Scott Hamilton

Well, I finally called the wrecker out to take my yellow runabout to the local Ford Dealer's body shop. They are taking all the windows out & all the chrome off the car so I can send it away to be refinished. Repainting the car the orginal color...

This will be a long process, I'm looking forward to it!

That's my wife & son saying bye bye to the 'pinto car' ...
Yellow 72, Runabout, 2000cc, 4Spd
Green 72, Runabout, 2000cc, 4Spd
White 73, Runabout, 2000cc, 4Spd
The Lemon, the Lime and the Coconut, :)