Mini Classifieds

1972 pinto grill
Date: 02/27/2018 12:13 am
74 Wagon body parts and a couple of 79 bits

Date: 11/14/2019 04:02 am
1974 Ford Pinto Squire Wagon

Date: 05/30/2020 01:51 pm
79 pinto steering column
Date: 08/18/2018 02:00 pm
Bellhousing for C4 to 2.0 litre pinto
Date: 01/30/2017 01:48 pm
76 pinto sedan sbc/bbc project for sale $1700 obo

Date: 03/27/2017 10:07 pm
Misc. Pinto parts

Date: 11/09/2019 04:25 pm
1979 Pinto Sedan Delivery

Date: 06/15/2019 03:30 pm
1976 Ford Pinto

Date: 07/16/2019 02:51 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 826
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 566
  • Total: 566
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

How to obtain a " Build Sheet" from Ford.

Started by turbopinto72, September 29, 2004, 11:16:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

STUNTKARZ

Hello All, Here's the latest in the quest to get a " Build Sheet " letter from Ford. You must order online at ShopFordGear.com I first tried customer service at 800-392-3673 and they could not take the request over the phone. There are two options, Basic for $17 and Deluxe for $46. Attached are samples of what you will get. Sounds similar to what you get in a Marti Report however I think on Ford letterhead with a Ford signature looks a lot better.

flash041

Here is a copy of my 78 build sheet.
1978 Pinto Cruising wagon (I am the original owner ! ) Built Aug 15th 1977 in NJ
1993 Mustang LX 2.3 convertible

pintoman1972

I made my phone request back in February of this year.  Took about 5 weeks to get my info in a letter.

If they have changed their policy of provinding info since then, well what can I say.

Dick

Bigtimmay

I called them maybe a week ago and i got told the only way to get that info is to buy the build sheet of shopfordgear.c om. So i just did all the work myself and I know prolly just as much as they know just by decoding the doors sticker.
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

pintoman1972

Ok gang,

You can obtain basic production information about your Ford Pinto directly from FORD.  The trick is knowing how.  You can choose between writing or by phone.

To request by mail, write to:

Ford Motor Company
Customer Relationship Center
P.O. Box 6248
Dearborn, MI 48126

Write a short letter asking for the original specifications and optional equipment for VIN number   xxxxxxxxxxx    Make sure you also provide them with your name and mailing address.  In a few weeks, maybe up to 6 weeks, you will receive a letter with the information you requested.   

It takes time for someone to go back into 40 year old paper records to research and find the info for your exact VIN number.  The information they have to gather and put into a letter back to you includes the breakdown of your VIN number that will show model year, plant produced at, car type, engine and unit number.  They also will provide you with the exact date your vehicle was produced as well as a listing of all the optional equipment on your vehicle at the time of production.  That includes but is not limited information about the original exterior paint color, interior trim scheme, interior trim color, transmission type, rear axle ratio, tire size, and so on.

To make the same request by phone call  800-392-3673
8:00 a.m.-5:00 p.m.  Local Time for Dearborn, MI Monday-Friday.  Just tell then you are requesting production information for your 19xx Ford Pinto.  They will ask for your VIN number, name and address, and like above you will eventually receive that info.

If you have a problem during your phone request, ask for Michelle Perez who is or at least was the Research Unit Rep for the North American Customer Relations Center.

This is basic production information and not a formal build sheet.  But it does list all the stuff that would normally be on the build sheet.

I am still looking for a copy of someones original 1972 Pinto build sheet and or window sticker so that I can make up my own to look like what it may have been back in the day.  Would appreciate hearing from anyone who can provide me with same.

Thanks,

Dick


pintoblue

I tried it one day this week, and likewise the women I talked to had no idea what a History 999 report was, but she said I
could obtain a build sheet by going to shopfordgear.com. I went there and the cost is $17. Forget that. For $15 you can get
a basic Marti Report for a Pinto.

bbobcat75

called the number today to get a history 999 report for the new bobcat wagon i just got  and the lady had NO IDEA what i was talking  about anyone tried to get one lately???
thanks
eric
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

77turbopinto

I had called for mine on 6/17/08 and never got them. I just called today and they show that I called them on that date, gave them the info, and that they called me back, but they have no record of mailing them. They will (re)send them, but they have to call me back (again) and it will be 4-6 weeks (again). Oh well..... It's still free.

I thought I would post this to let everyone know that if you don't get them in the time they tell you, call them back.

Bill
Thanks to all U.S. Military members past & present.

dave1987

I got mine in the mail today. Here's a copy of it:

Apparently Pintos are fastbacks! :D Looks like the Mustang guys have something coming for them. ;)
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

78squirewagon

I did this a couple of years ago when I got my wagon and it's actually pretty cool. I had almost forgotten about it until it showed up in the mail one day. When I show it to people, they want to get one for their Fords so it does work. It was a little more detailed than I expected so that was a bonus and the Ford letter head certainly adds to it.


Mark
1978 Squire wagon,red, 69000 and counting original miles

1978 Hatchback, red (built four days after  the Squire)

turbopinto72

Cool !!! I hope you find the sheet usefull.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

popbumper

Thanks for the info! I phoned Ford and requested my info today  ;D.

Chris
Restoring a 1976 MPG wagon - purchased 6/08

ilvmy76

"Immersion Heater"
a large paperclip looking "thingy" with a 110v cord attached, that you put into a coffee cup, to make your cold coffee hot again.

lol....sorry, couldn't help it...but that sheet sounds so cool, i'm gonna get one too, need help with my wheels, maybe it'll give me a leg up.  thanks guys!!
worry does not empty tomorrow of it's troubles, it emptys today of it's strength!

turbopinto72

Hey, thats great to hear you got your report.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

RobertConner

I called the number late Monday afternoon, and my build sheet was in my mailbox today! Not bad. Thanks, Ford.

Okay, they start with a breakdown of the VIN, which I think most of us know by now, or at least as much as they pertain to our cars.

Then it gives that date the car was built, and it follows with an option list.
For example, mine shows the following options.
* Jade, Dark Metallic Exterior Color
* Jade, Dark Valino Front Half
* Jade Vinyl Interior Bucket Seat
* Glass Rear Door
* XP Type Automatic Transmission
* 3.40 Non Locking Rear Axle
* Immersion Heater
* A78 X 13/B BWS Tires
* Convienience Group
* Power Steering
* Power Disc Brakes
* Rear Window Defroster
* AM Radio
* Interior Decor Group
* L.H. & R.H. Remote Racing Mirrors
* Front License Plate Bracket
* Wire Wheel Covers
* Body Side Moulding Normal

So, it appears that my Pinto was pretty well optioned out. All that's missing is air conditioning.
But I gotta ask, What the hell is an immersion heater? And what is an XP type automatic transmission? I've never heard of either one. Can anyone clue me in?

Anyway, I plan to get one for my 84 Crown Vic come Monday.   :)

Anyone else gotten their report back yet?
Pinto= Put In Nickel To Operate

HEY, FORD! Bring back the Pinto!

RobertConner

Quote from: losin sux on October 18, 2004, 08:18:16 PM
Just out of curiosity I called Ford and requested a History 999 Report on my car.  They want the VIN AND the door code info, so if you call have that handy.  I doubt the form will have much on it other than what I already know based on using Joels' VIN decoder program.  The lady told me it would take 4-6 weeks to get it out.  I will post back when I get it and let everyone know if it is worth the phone call.  She didn't even chuckle when I told her it was for a 77 Pinto!

So, did you ever get a build sheet for your Pinto? What data did it have on it? IOW, was it worth the effort? A copy of the build sheet would be a nice piece of documentation to have for your Pinto. At least I think so. :D
Pinto= Put In Nickel To Operate

HEY, FORD! Bring back the Pinto!

turbopinto72

Cool, thanks for taking the time and checking it out.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto

losin sux

Just out of curiosity I called Ford and requested a History 999 Report on my car.  They want the VIN AND the door code info, so if you call have that handy.  I doubt the form will have much on it other than what I already know based on using Joels' VIN decoder program.  The lady told me it would take 4-6 weeks to get it out.  I will post back when I get it and let everyone know if it is worth the phone call.  She didn't even chuckle when I told her it was for a 77 Pinto!
77 HB 2.3 C3 3.40

turbopinto72

Ford offers a service where owners can obtain a " History 999 Report" for their vehicle. You call their toll-free 800 number and ask for a History 999 report, give them the make, modle and the VIN. Then, Ford will send you what amounts to the build sheet for your vehicle. This sheet will tell you all the options that your vehicle came with from the factory. This service is available for all Ford, Lincoln and Mercury vehicles from 1967 to 1996.
Contact: Ford Motor Company, Customer Assistance Center, 16800 Executive Plaza Drive, P.O. Box 6248, Dearborn, MI 48121 USA. In the USA, call toll free 1-800-392-3673. In Canada call toll free 1-800-565-3673. Outside the US or Canada, contact Ford Worldwide Direct Market Operations, 1555 Fairlane Drive, Allen Park, Michigan 48101. Telephone 313-594-4857. Fax: 313-390-0804.
Although Ford prefers that you contact customer assistance in your own country, you can send an email request to Kate, the Ford virtual customer service representive, on the Contact us page of the www.ford.com or www.mercuryvehicles.com websites.

NOTE, this information is assumed reliable, however it was generated form FAQ Mercury Monarch web site and untill someone on this site comfirms it to be correct it is for general information only.
Brad F
1972, 2.5 Turbo Pinto
1972, Pangra
1973, Pangra
1971, 289 Pinto