News:

Changes Continue... Scott Hamilton

Main Menu

Mini Classifieds

1973 Ford Pinto Squire Wagon 3 Door

Date: 07/11/2023 11:39 pm
Weiand Single plane manifold - for 72 Pinto 4 barrel Carb
Date: 04/25/2017 12:17 pm
Crane Cam
Date: 02/26/2018 07:50 am
$300 Pinto for sale

Date: 04/19/2017 10:24 am
1978 ford pinto carb
Date: 02/04/2018 06:09 pm
wanted a 1979 Pinto or Bobcat front valance
Date: 03/17/2019 10:15 pm
New cam

Date: 01/23/2017 05:11 pm
Pinto wagon Parts
Date: 06/23/2021 03:25 pm
80 pinto original

Date: 08/04/2019 10:45 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 899
  • Online ever: 1,722 (May 04, 2025, 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 541
  • Total: 541
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

347 or 408?

Started by STREETREBEL, September 06, 2012, 08:28:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

cabecho

It all depends on how much power you want. and how much money you want to spend.
i have a speed shop and i can give you a few options that i have build and the price range too so that you can have on idea.
You can keep your 302. stroke it to a 347 and 0 deck the block, put sleeve orings, flat top pistons, with a good aluminum port and polish heads. and you can still put a NOS plate with 125 shot if you want, the motor will hold.
Or if you want to go to a high end motor, you can go get a 351W stroke it to a 427 ( they make a bigger stroker kit but i dont recommended unless you are using a forge block) with a 13-1 compression ratio, zero deck the block, sleeve orings, good big valves aluminum head port and polish, good intake with at list a 850 carb. and you can have a motor with easy over 600 hp, ( run lead on your fuel.) This set up is pretty much what i run on my pro-street, i have a forge dart block, with twister heads. small tunnel ram with a 950 demon. and i make 775hp all motor and is a motor that i have driving on the street with out a problem. have driving to work multiple times when my truck was broken.
Aerodynamics is for those who can't build engines

If ford pintos are not fast then why chevy's have to use there parts to make them fast?

johnbigman2011

I would like to see the test results as well ::)
1972 Trunk Model..... Yeller Feller
1979 Wagon Turbo.... 85 2.3 Turbo
1923 T- Bucket ...... 2.0 Pinto Powered
F 250 Redneck Lincoln .... Pinto Picker upper

Pinturbo75

Quote from: jim72 on September 07, 2012, 09:17:00 AM
C.I. equals torque potential : torque rules the streets !!!

id like to put that to the test........ pinto v8 against say,,, 140 ci......:D
75 turbo pinto trunk, megasquirt2, 133lb injectors, bv head, precision 6265 turbo, 3" exhaust,bobs log, 8.8, t5,, subframe connectors, 65 mm tb, frontmount ic, traction bars, 255 lph walbro,
73 turbo pinto panel wagon, ms1, 85 lb inj, fmic, holset hy35, 3" exhaust, msd, bov,

Reeves1

No more sending an engine to the States for a build. Adds at least $1500.00 to the cost. Not counting GST.

I have several options up here. One being Barrie Poole in Ont. I wanted to get him to build my BOSS 302. But he was gone to Florida for the winter.
If Had known I would end up not finishing the car this past summer, I'd have waited till he was back for the summer.

oldeguy

No Budget!!!! fan...tastic!
call Woody at http://www.fordstrokers.com/ tell him what you want or are looking to do, he'll help you figure it out. I visited his shop a few years back, nice small shop, does all machine work in-house. builds only sbf...he started out building short block, now build carb to pan sbf stuff. 
at some point...2.3L EFI T3/4stageIII FMIC 55#inj eecla3 90mm MAF 65mm T/B 5 spd 8.8 w/ 3:73  11" rotors, GM Metric, explorer rear disc 205 55 14 fronts 225 50 15 rears subframe connectors w/ a 6 point roll bar

Reeves1

I have not researched the 351w aluminum yet. Still working on the white one.

No budget. Spend whatever it takes.

My B2 engine has the 347 stroker kit. Bored .020 over. It's a 345 now. Builder also put a custom , mild, hyd cam (i kept asking for an agressive solid roller & max bore). It was also changed to the 351w fireing order. Releaves the stress on the 5/8 journal.
Original B2 heads, but lots of port work. They now flow as well as any after market heads. Stainless valves & more.
Without the windage tray (has one now) and a 750 dp Holley, dynoed out @ 473 HP & (I think) 416 TQ. ( will go over 500 HP with an 850 dp - it was tested on my engine)
Going to use that engine as is till I can get it re-built (again) the way I want.
Will max bore (not worried about it blowing up...if it does no big deal, just build another)
An agressive solid roller cam. Jump to at least an 850 dp Holley.

Used the new E-BOSS Edelbrock intake on the B2. Would like to have port work done. Pick up an OEM intake & have port work done. Then dyno, testing both.
Mine was test dyno with an OEM, but no port work was done to it. The E-BOSS gave more HP & a better TQ line. But the OEM liked going to 7k RPM.

Main reason I would like to build the all aluminum is the weight. I have glass fenders & looking for a glass hood. Failing a glass hood, I'd trim all the metal I could & acid dip it. Maybe the whole body.

oldeguy

want's your budget? a 408 with heads that can breath, with a cam and intake to match would be awesume! but you'll need some nice sticky tires to put it to the ground and a chassis to take it!
I got a 2500 pound AC Cobra, went from a crate 302 to a 347 with Canfield 195CC heads, Comp X-tream cam, VicJr intake and a ProSystems carb...Sweet! 12.05 @ 119 mph with tires spinning (295 50 15's) from idle off start half way thru second gear. Now sure I'd want more power to weight ration for street/ BTW, chassis dyno'ed at 395 WHP! not bad for a 347!
at some point...2.3L EFI T3/4stageIII FMIC 55#inj eecla3 90mm MAF 65mm T/B 5 spd 8.8 w/ 3:73  11" rotors, GM Metric, explorer rear disc 205 55 14 fronts 225 50 15 rears subframe connectors w/ a 6 point roll bar

Reeves1

Ford racing now has an all aluminum 351w block. Lots of aluminum heads out there.
Go all aluminum engine to save weight.
Go max bore. Stroke it. Big olde lumpy cam !
Lots of intakes & carbs to choose from.
Custom headers !

The above is what I'm thinking of for my 2nd build !

Bigtimmay

Quote from: STREETREBEL on September 07, 2012, 10:16:08 AM
Does a 347 use a 351w crank?
351w is 3.500" stroke 347 uses 3.400".   
As for the 2 engines in debate 347 an 408 have issues with the oil ring on the piston intersecting the rod pin and causing them to fail faster.They do make pistons that fix this but they cost a ton more then the standard stroker pistons.
With that being said can I suggest another solution and will still yield great torque/hp for your pinto and will not have the oil ring problem. A 393w will cost around the same as the 408 or 347 but the oil rings don't intersect the pin and really there wont be a huge difference between it and a 408 in HP or torque and it'll yield more power/torque then the 347 and wont have to rev as high to make the power.
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!

vonkysmeed

Quote from: STREETREBEL on September 07, 2012, 10:16:08 AM
Does a 347 use a 351w crank?


do not think so, there is not enough stroke length in the 302.  The deck height is taller for the longer stroke.  I still lust after my friends 351w that was pushed to 427 in his cougar.  If he ever wrecked the car, i had dibs on the motor. 
73 Pinto Runabout
351w from 74 galaxie
Heads from 69 Mercury Cougar
82 Mustang GT SROD Transmission and driveshaft
Mustang II rear end with Fairmont 3rd member
6 point cage

STREETREBEL

Does a 347 use a 351w crank?

jim72

C.I. equals torque potential : torque rules the streets !!!

vonkysmeed

Quote from: STREETREBEL on September 06, 2012, 10:38:53 PM
They are two different engines.
with some interchangeable parts...   I prefer the 351 (punched out to what you want) as there is no replacement for displacement.   This from a pinto owner with a 351 in it.
73 Pinto Runabout
351w from 74 galaxie
Heads from 69 Mercury Cougar
82 Mustang GT SROD Transmission and driveshaft
Mustang II rear end with Fairmont 3rd member
6 point cage

STREETREBEL

They are two different engines.

79prostreet

I'm not sure if you can build a 302 into a 408, 347 for sure. I'm needing to decide if I want my 351w a 408 or 427, need to do a little more research,
79prostreet

STREETREBEL

I have a 302 in my Pinto now. But, not enough power for me.
Soooo!
Should I put a 347 or a 408 in it?
I'll have to buy new headers anyway. So it seems like the same cost
between the two.
Does the 347 torque like the 408?
Lets hear it!