News:

Changes Continue... Scott Hamilton

Main Menu

Mini Classifieds

1971-1975 Pinto
Date: 01/09/2017 04:14 pm
1974 Pinto Inside Rear View Mirror & Brake Pedal Pad

Date: 02/18/2017 04:41 pm
KYB shocks

Date: 02/08/2017 07:09 pm
1974 Pinto Drivers door glass and parts

Date: 02/18/2017 05:52 pm
WTB - 1979 Fan Shroud - D52E-8246-CIB
Date: 11/05/2020 06:32 pm
Drivers side door panel Orange
Date: 05/22/2018 02:27 pm
Sunroof shade
Date: 06/19/2019 01:33 pm
Parts for 74 Squire Wagon
Date: 09/16/2019 07:35 pm
Dumping '80 yellow Pinto

Date: 06/21/2017 03:45 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 1,431
  • Online ever: 2,670 (Yesterday at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 1120
  • Total: 1120
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

Midnight Widow.

Started by 75bobcatv6, December 08, 2010, 06:53:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

75bobcatv6

Interior is out. since its been raining I have not had time to take pics, Will get those up Asap.


Plan is to have the car ready to be Blasted by feb/march, I have been getting Glass packing boxes and what not so that I can safely put the glass away. While im working on the car, the wife has switched directions as to the "theme" of the car. It will be a darker blue with some air brush work on the tail gate, a big blue police box and the *time vortex*....... her car her choice ill build what she wants atleast Ill be able to do the performance Items I wish to do to the car. first things first at tax time, I get to buy the wilwood set up =D

75bobcatv6

So since the car did not sell, ive taken that all down. and have decided that im going to push through the financial crap ive been dealt, and store the car. As of this moment tho the car will never be the same. <insert Evil laugh here>


http://www.ebay.com/itm/JDM-MAZDA-RX7-FC3S-TURBO-2-S5-LSD-DIFF-SUBFRAME-13BT-SAVANA-/280896258133?pt=Motors_Car_Truck_Parts_Accessories&hash=item4166b8c055&vxp=mtr#ht_601wt_952 Im going to be going this route with the rear end. Can pick one up at a yard out here for about 125, then I just have to figure out how its going in. =D Couple that with the 3.8L Supercharged V6, or the 95 roller D port ranger motor id like to swap in should be a really really fun car.

75bobcatv6

See if we can make it out there. Sounds like fun. too bad the widow wont be making it there this year lol


RSM

It's on Central Ave in Phoenix. Here is a link to the flyer. http://www.cruisinarizona.com/events/041412central.htm

75bobcatv6


RSM

While I'm thinking about it, you should go check out the car show/cruise going on next Saturday down at Park Central Mall. Going to be tons of hot rods and cars of styles. I'll have my wagon down there. It starts at 1PM and goes till about 9PM. Not sure if you were familiar with it but I thought I'd mention it.

75bobcatv6

Messaged him. thanks man. Hopefully after all the wedding stuff next year ill have some cash left to actually put into the car.


75bobcatv6

Havent seen it up on CL lately. but im buying a Reman- long block. ill need the connecting items. Ex. man, intake, pulleys. Serp set up, and what not.

RSM

Ya I bought that out of Cali and it turned out to be a lemon. Had rust issues and the engine went sour not long after I got it back. He's trying to recoup his money in the engine. It would be worth about 1K

75bobcatv6

That was yours? Wants alot for it last time I saw it.


RSM

Hey Chad...that kid that bought my wagon put a turbo motor in it but never finished the car. You might be able to get it for a good price. You can find it on Craigslist. If you do wind up with it I could use some parts.

75bobcatv6

Been trying to get time to work on this car. as of now since im buying the wife the truck she wants im getting to do what ever i want to the car as it will be mine now. So time for a Turbo 4, with some fun stuff lol.. maybe not sure what im going to do but i wont be stuffing a v8 into it. I really want to get a 90's ranger motor for it and swap to FI.


Perhaps if i am able to do more to her today ill post something then. and add more pics


75bobcatv6

Well folks its been a while since I have been able to do anything to the car but, as of today I have all the chrome that isnt bolted in off. if you want the aluminum/chrome mouldings let me know they are free + shipping. Ive started Dent repair, sanding to get the car ready for the body guy. 300 dollars and hell do the body work, for another 250 with my materials he'll primer the car for me. sounds cheap i know but ive seen the work hes lowered his prices to get business in, so he like so many others can make his bills.

  I was not how ever able to get the brake system taken care of, or the rubber mounts. I was not counting on stuff coming up lol. but as of this next return I have 1000 set aside for brakes/rubber/and ball joints. photos will be up on photobucket here in a few
http://s367.photobucket.com/albums/oo116/75bobcatv6/

75bobcatv6

but alas the madness has finally started to take hold and Now I can really begin to repair the car. I have a full front end rebuilt coming. all things rubber or rotted will be replaced. I have the car on Stands all the way around. next weekend I will be pulling the wheels and calipers and what not and either rebuilding them or replacing with new units. same with brake lines/gas lines.

75bobcatv6

the pic is of the front end being disassembled. I found out that the bumper mounts were.. well Up and down instead of to the sides. the bumpers were held on by 2 bolts instead of 4..


75bobcatv6

Car is now in a garage where i can work on it and not worry about the neighbors complaining. =D

75bobcatv6

http://s367.photobucket.com/albums/oo116/75bobcatv6/

Here you go Matt. just click the Kats 78 album. Still have alot to do. Will get more done this next weekend. (this weekend im busy as hell)

r4pinto

Do you have a link to your photo bucket?
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

75bobcatv6

be sure to check my photobucket out for Updated pics. Ill be adding more this week already have some up


75bobcatv6

Will be working on the car later today after work


Pinto5.0

I'd kinda like all that blue I think. You can always spray the tops & bottoms of the doors as well as the dash frame black to break some of that up though.
'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

75bobcatv6

I love the color. but I have to do something about the interior being too Blue. I mean everything is blue... the only black Accents i think are the shift boot, pedals, and the vents. I just dont see it staying blue inside. otherwise the car will remain bone stock.

One fender sanded, and at least set against rusting for the night. Ill do more tomorrow. I cant seem to find my long extension cord so im using the Little house hold ones.. lol. not an easy task when it only reaches the Door/fender gap. If i add one to it.. it stops working. so i have to find my Electricians cord.


i think the term you were looking for was Slipperier.

Reeves1

Nice color !

Older bro once told me blue is faster...... because it is slipperyier (no idea on spelling that !)  :lol:

75bobcatv6

This is the color we plan to paint the car.

75bobcatv6

Well, thought Id post an Update since Ive now had some time to start working on the car again, Carb is rebuilt. she runs great, I found my fuel issue. it leaks at the tank theres a few rust holes in it. Ive begun the Sanding and prep work for Primer. Been a while since I have posted but I have a complete parts list and Ive got probably 1/4 of it purchased. will start doing more parts when tax time comes, at that point the car should be ready to go to a Vocational School where the students there will paint the car for the cost of materials. so around 1k. (im not getting a cheap paint job and the color has to be custom mixed.


Parts I have gotten:

Front end Rebuild Kit ( upper/lower ball joints, bushings, any and all rubber that should be replaced, Calipers, rotors, pads, lines, Tie rods.)

Still need to get the Clutch Kit, rear brake lines, Shocks F & R, install the Rear Sway Bar, Gas tank if i cannot fix the one I have. re-chroming of wheel trim, head light bezels. and I gotta find Black carpet to go into the car. Too much Blue even for me. (btw this is now both my Wife's car and Mine since I had to sell my bobcat. )

75bobcatv6

Today was Fruitful yet Sour. the car seems to be going through 10-12 Gallons of fuel every 140 miles or so, thats down from what it Was at before around 200, Im suspecting that I need to completely Overhaul the Carb. So I will have to order that tomorrow and pray that is all i need to do. Looks like there is Varnish all over the carb, From just about every place there is a seal or Gasket. Until I get the carb rebuilt and done I dare not mess with anything Else under the hood. Such as timing. There are new pics up on my photobucket as well if you wish to continue following what I have been doing.

75bobcatv6

The list continues lol,
Here's what i found today, Got the car up on stands, got the wheels off. Started poking around. I need to replace the brake lines, i figured that much, but basically I will be rebuilding the Entire front end, pulling Impact damage out, as well as Cleaning the complete underside of the front end. I believe that I have the 11/16 Sway-bar on the car but i am not sure. This will be fun lol Ive got a lot to do and not enough money to finish it all.

75bobcatv6

Help. I need a Brake propotioning Valve Sensor? or the whole unit. either way the brake light is on and only goes off when i disconnect the 2 Terminal connector to it. Cannot seem to find anyone that carries it. Anyone? help.... Also I need a Fuel sending unit or a how to on rebuilding the one I have. Says I have half a tank when its empty (learned the hard way, ran out of gas leaving work)