Mini Classifieds

ISO instrument panel 80 hatchback
Date: 04/20/2017 08:56 pm
73 2.0 Timing Crank Gear & Woodruff key WANTED
Date: 09/01/2017 07:52 am
1980 Pinto w/ Trunk
Date: 08/10/2022 04:09 pm
Mallory Unilight dist 2.0
Date: 10/25/2019 03:44 pm
72 Pinto parts
Date: 11/14/2019 10:46 pm
Need 2.3 timing cover
Date: 08/10/2018 11:41 am
1980 Ford Pinto For Sale

Date: 07/01/2018 03:21 pm
1973 Pinto Runabout

Date: 03/25/2019 09:02 pm
Electrical
Date: 03/29/2017 11:37 am

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,601
  • Total Topics: 16,271
  • Online today: 536
  • Online ever: 3,214 (June 20, 2025, 10:48:59 AM)
Users Online
  • Users: 0
  • Guests: 478
  • Total: 478
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

clutch cable

Started by blupinto, November 23, 2010, 09:08:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

blupinto

Thank you Dick and Dwayne! You're getting hugs back!!! ;D
One can never have too many Pintos!

dga57

Becky,

I just KNEW things were going to work out!  Jimmy is awesome!  So glad you've got Ruby on the road again!  Congratulations!

Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

postalpony

 
  Way to go Becky!!!  I am so glad you didn't
  give up.  That earns you a BIG hug when you
  and I meet on the way to or at Carlisle.

                         All my best to you---Dick
1980 Hatchback was a "Postal Unit" on the
west coast in it's early life. Now residing
in Ohio, But we don't haul the U.S. Mail anymore;
Now all we do is HAUL!
5th gear 4700 rpm & still pullin'= 113+  mph

UPDATE-83.762 mph in 4th gear As verified by a W Va State Trooper-WITH 1 GEAR TO GO 6-2-11

blupinto

Thank you Dave!  :D   I wish you success on your '78's clutch pedal.
One can never have too many Pintos!

dave1987

Congratulations Becky! :D

Now hopefully I can fix my 78's clutch pedal in the next couple weeks. I don't have excessive play in the clutch, just the pedal. That is, mine wobbles left and right about 2 inches because of the angle at which the Mustang II cable is on my pedal.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

blupinto

IT WORKED!!!!!!!!!!

Thank you thank you THANK YOU Jimmy and everyone who had faith in me. I was very clueless as to what I was trying to do with the clutch cable, but Jimmy's advice about that rear adjusting nut, plus seeing a "normal" clutch cable at the wreckers yesterday produced that "Eureka!" moment we all love. There is no more floppy clutch pedal... no more refusal to shift. Ruby was taken on a test run tonight and passed with flying colors! Thank you all  for the advice and good wishes. It's nice to win now and then... ;D
One can never have too many Pintos!

blupinto

One can never have too many Pintos!

dga57

Quote from: blupinto on February 01, 2011, 08:18:15 PM
Ok I think I have a clue...wish I took automotive classes in school now...
Jimmy tried to tell me how to do the clutch cable adjustment (not the way any of my books described it as well) and I thought I knew what he was saying in the Shout Box but apparently I needed an extra nudge. That nudge came via a poor lil '78 Pinto at the wrecking yard. I see now what Jimmy was trying to tell me!!! I will attempt to do this RIGHT as soon as I can get some time. Thank you Jimmy Shifflett!  ;D

     Sounds encouraging!  Here's hoping it works!!! :drunk:

     Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

71pintoracer

You are most welcome Miss Becky!! I'll check back to see how it went!  ;D
If you don't have time to do it right, when will you have time to do it over?

blupinto

Ok I think I have a clue...wish I took automotive classes in school now...
Jimmy tried to tell me how to do the clutch cable adjustment (not the way any of my books described it as well) and I thought I knew what he was saying in the Shout Box but apparently I needed an extra nudge. That nudge came via a poor lil '78 Pinto at the wrecking yard. I see now what Jimmy was trying to tell me!!! I will attempt to do this RIGHT as soon as I can get some time. Thank you Jimmy Shifflett!  ;D
One can never have too many Pintos!

blupinto

Dick, I wish you were closer too! lol  :lol:  I look forward to meeting you, as well as the others who will make this great milestone show! This weekend will be "fool with the cable and spring" time, so who knows? A miracle may happen... or mayhem (I'm betting on the latter).  ??? 
One can never have too many Pintos!

postalpony

 

   I wish i was nearer to you, I would make it work. I have been known

   to repair things that people were going to scrap. Thats why I am the

   CEO of BTF Engineering.  (BTF) beat to fit.  Seriously I wish I could

   be there & help you out.  Don't give up I am looking forward to meeting

   you at Carlisle!   All my best to you.    Dick aka Postalpony   :smile: :smile: :smile:
1980 Hatchback was a "Postal Unit" on the
west coast in it's early life. Now residing
in Ohio, But we don't haul the U.S. Mail anymore;
Now all we do is HAUL!
5th gear 4700 rpm & still pullin'= 113+  mph

UPDATE-83.762 mph in 4th gear As verified by a W Va State Trooper-WITH 1 GEAR TO GO 6-2-11

blupinto

Ahh... I see the spring you're talking about... now what have you anchored it to?

I tried the coat-hanger idea (not enough tension), not knowing Fred had another spring involved, so genius that I am I thought, " How about a thick rubber bungee cord?!" It might have too much tension... when I attempted to put the car in the driveway the shifter would only go into reverse willingly. AAAAARRRRGGGHHHH!!!!!!!!!!!! Also, when I lifted the hood this morning the rear locknut was WAAAAAY loose and had worked itself about an inch away from the housing. I cannot physically pull the cable towards the front of the car like all the books I have say to do. No wonder I prefer automatics!

Speaking of info, the information for how to adjust the clutch cable came from two different Chilton's Pinto and Pinto/Bobcat books, the Ford shop manual, the Ford Pinto DIY book (black cover) and Haynes Pinto 1971-1974. I'm probably gonna have to leave this to the professionals. It's too bad Drew Ford couldn't help in this department. This might throw a wrench into the Stampede thing. I'm really discouraged now. :(
One can never have too many Pintos!

Fred Morgan

Here is the spring with light tension on it just enough to keep fork all the way back to rear of car.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

oldkayaker

Yea I made several assumptions and guesses as to what was causing bluepinto's problem.  The 71 Ford manual shows using a 0.135" spacer for adjustments.  The 71 manual shows the cable adjustment using a C clip instead of jam nuts but does not appear to have any obvious typo's.  My first Pinto was a 71 manual but I do not remember this C clip arrangement.  Maybe mine was a late year model or the memory is fading again.
Jerry J - Jupiter, Florida

dga57

Quote from: oldkayaker on January 23, 2011, 07:23:14 AM
From your sign in , I am assuming you are working on a 72. 


     Actually, she's working on a 1971.  The picture she uses as an avatar is of her original Pinto, which was a blue 1972.  Her '71 is red.  Probably not all that different, though.

     Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

oldkayaker

From your sign in , I am assuming you are working on a 72.  If you are using the Ford 72 manual, note that there is a typo in the clutch adjustment procedure.  They fixed this typo in the 73 and 74 manuals.  The 72 instructions are correct up until you get to the last step of tightening rearward most jam nut.  The 1/4" spacer should be removed before tightening the rearward most jam nut and not after as the 72 manual says.  When done there should be no gap between the jam nuts and the housing (front and behind).

Being lazy, I never read the manual until now so never used the 1/4" spacer method.  I did the adjustment based on pedal feel.  With pedal depressed, check that gears can be shifted into with out grinding.  With the pedal up, check for some pedal free play.  The Ford method sounds more precise.

Fred's picture is looking up with the rubber boot totally removed. To see the factory spring, the boot needs to be disengaged from the aluminum housing and pulled rearward.  The spring is concentric around the inner clutch cable in front of the clutch fork.  The spring has about a 3/8" outside diameter.  In Fred's picture, the wire connected to the clutch fork heading rearward is to an extra spring added to assist the factory spring (neat idea when needed).  Not having worked on later models, I am assuming this "extra spring" is not stock.
Jerry J - Jupiter, Florida

blupinto

Is this spring inside the clutch housing boot? All I see outside of the boot is threads where the nuts go.

Fred, I'm still trying to figure the picture out. I recognize the drive shaft but everything else looks unfamiliar. If it's safe to pull the boot I will.
One can never have too many Pintos!

Pangra74

Yeah it was Fred who put that pic up there. You can see the end of his cable and the spring on it. If there is no spring you have to remove the boot like his and add one from the lever forward to the crossmember somewhere. Quick fix.
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

Pangra74

Becky, there has to be a spring on the transmission end of the cable. It's part of the cable. Wraps around it similar to the throttle cable on the carbureter. That's what pushes the pedal back up. Without it you will have no freeplay and the throwout bearing will be constantly spinning with the clutch lever resting on it. Not good. The clutch will still work as it's springs will push the clutch lever back, but without the cable spring the lever/throwout bearing will constantly be leaning on the clutch plate. I think someone posted a pic of the clutch cable in this thread. You can add your own spring like he did to pull the lever back. You just have to go without the rubber boot.

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

blupinto

Today after work I went to investigate Ruby's clutch cable issue, abd discovered a couple things: 1) the quarter-inch gap that was supposed to be in front of the clutch boot was behind the clutch boot (housing), and 2) the adjusting nut behind the clutch boot was VERY loose. Once more I crawled under the car and adjusted and tightened nuts. After all that my clutch pedal was still loose. I looked at the green wagon's pedal and cable and see no difference except the wagon's has no looseness. For the life of me I can't find a spring, just where the cable attaches to the clutch pedal, a rubber grommet attached to the firewall where the cable goes through and becomes way wider... followed the cable visually to the clutch housing... but saw no spring in either cars' pedal and cable assemblies. The little black rubber bumper on the top of the clutch pedal doesn't reach its contact... by maybe two inches. The clutch seems to be fine, though. Still... what am I missing here? :-\
One can never have too many Pintos!

Fred Morgan

Becky, see the wire on fork it has a spring on it and is hooked to trans cross member making sure the bearing isn't spinning while driving.  Fred   :)
Fred Morgan- Missing from us...
January 20th 1951-January 6th 2014

Beloved PCCA Parts Supplier and Friend to many.
Post your well wishes,
http://www.fordpinto.com/in-memory-of-our-fallen-pinto-heros/fred-morgan-23434/

blupinto

I wonder if that's what happened with my green wagon... well, this s u c k s. I'm hoping next month I can get the stuff for the wagon and maybe "experiment" with me replacing the throw-out bearing and pressure plate to see if I'll screw it up (on the wagon).  If that's successful I'll attempt the red one. The cable itself is clearly another issue... :(   Thank you all for your help.  :)
One can never have too many Pintos!

Pinto5.0

You need the spring to keep the freeplay set. Without it the throwout bearing rides on the pressure plate & burns up prematurely.
'73 Sedan (I'll get to it)
'76 Wagon driver
'80 hatch(Restoring to be my son's 1st car)~Callisto
'71 half hatch (bucket list Pinto)~Ghost
'72 sedan 5.0/T5~Lemon Squeeze

blupinto

Question: Is the tired old spring something I should worry about? I know the clutch was replaced at least once by her original owner (the car's).
One can never have too many Pintos!

Pangra74

If the cable is really old the spring on the end could be tired and not pushing the pedal back all the way. You should normally have about 3/4" of freeplay when the pedal is all the way up before you fell tension against the cable.
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

blupinto

Hey Joe! Thank you! I will try the stall-at-3-and-4 and see what happens. It could be possible that the dumb nuts are loosening, even though I do try to tighten them up good (awkward while under the car). I do notice that after I depress the clutch pedal and release the pedal doesn't come all the way up (I can push it up from below with my foot). I am not losing power like I did last year after the Fab Fords show, so that's good. I don't want the cable to break before I get a chance to upgrade my AAA roadside assistance, or they won't do it (new policy of theirs- if you've been towed within a year's time you can't upgrade to the 100 mile tow package).
One can never have too many Pintos!

Pangra74

Hey Becky,

It doesn't sound right that it would need to be adjusted that so often, even with commute driving. I drive mine to work occasionally with lots of stop and go and maybe adjust the cable 2 or 3 times a year. I use the trans a lot for up and downshifting, so I use my clutch frequently. When the cables start to stretch and possibly snap, the amount of freeplay at the top will increase significantly and continue to increase as the cable gets longer as it comes apart. Usually when a clutch is wearing out, aside from slipping, the freeplay starts to go away as if the cable has gotten shorter.
If you can put it in 3rd or 4th gear while standing still and stall the engine when you let in the clutch, it's probably not slipping. If the engine won't stall when you let in the clutch, then it's definitely weak.......just my 2 cents.

The only other possibility is that the locknuts are not tight and its working itself out of adjustment by vibration, something that Pinto's have plenty of!

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

blupinto

It's not slipping that I can tell, but I adjusted it in November. Unfortunately, there's a lot of stop-and-go between my house and work. Damn signals! >:(
One can never have too many Pintos!

Bigtimmay

Its more then likely the clutch  but as for needing a new one is it slipping? if not i would just re-adjust it and go with it manual clutchs are always needing adjusted specially if the cars driven quite a bit. My old 79 3/4 ton chevy i had got adjust once a month but i was hard on that truck lol.
1978 Mercury Bobcat 2.3t swapped.Always needs more parts!