Mini Classifieds

74 pinto
Date: 09/11/2016 06:32 pm
72 pinto and 88 turbo coupe

Date: 06/09/2016 04:13 am
ford pinto door panels
Date: 03/20/2022 07:51 pm
1980 Pinto Wagon

Date: 02/29/2020 07:01 pm
1972-1980 Pinto/Bobcat Wagon Drivers Side Tail Light OEM

Date: 04/20/2017 10:10 am
1976-1979 FORD PINTO BOBCAT FRONT HOOD TRIM MOLDING D4FZ-16856-A OEM EXCELLENT

Date: 09/22/2020 11:33 pm
1975 Pinto bumpers
Date: 10/24/2019 01:43 pm
Alloy Harmonic Balancer

Date: 07/10/2020 12:17 pm
74 Pinto Rear Side Lights

Date: 02/18/2017 05:47 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,573
  • Total Topics: 16,267
  • Online today: 656
  • Online ever: 1,722 (Yesterday at 02:19:48 AM)
Users Online
  • Users: 0
  • Guests: 553
  • Total: 553
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

New piston rings in a 2.3

Started by Pangra74, January 30, 2010, 12:12:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pangra74

I should just go ahead and put in the 302, but I just got laid off temporarily, so I need to watch the funds. I'm just about done with the 8"rear, just need to put in the new brake hose and shocks. That 8" rear is a lot heavier than the old 6 1/4". What a difference! I felt like I had taken the rear out of a pedal car after I started dragging that 8 into place!

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

Srt

i used to pull and change piston assemblies one at a time on mine long time ago.   i had 'spare' assemblies of the same weight and physical configuration on the shelf.

this was usually done on a sunday morning after a hard night on whittier blvd or down in orange county with the "Brotherhood of Street Racers" (i swear, it's true!) and it was done to replace a melted piston or two

at times it was at home where i didn't have a cherry picker so off came he head remove the bottom nuts off both motor mounts and lift enough to let the motor sit on top of the studs. then drop the pan, remove the oil pump pick up bolts, drop that in the sump and remove the pan.

this was all on a 2.0 and it is a lot of work but in a pinch it was doable.  i think the guys are right. you should pull the motor it will really be the better and possibly faster way to get it done
the only substitute for cubic inches is BOOST!!!

71pintoracer

Basicly what happens is, when you bolt up a new head on an old(er) bottom end, the top "overpowers" the bottom end because it is fresh and tight.
If you have a cherry picker and engine stand, I would go ahead and pull it. I have done it both ways though, easy enough to get the pan off and knock the pistons out.
If you don't have time to do it right, when will you have time to do it over?

Pangra74

Well,

Here's some history. I originally changed the valve stem seals in the previous head using the air pressure in the cylinder method thinking that they were the problem. Nothing changed, still burned the same. I bought a rebuilt head online from a Bobcat owner to hopefully eliminate the head as a source. The head looks like it was rebuilt correctly with a new cam, bearings, followers and lifters. Problem still exists. This was a junkyard engine I had gotten from a guy in San Francisco. The original 2.3 was seriously blown, overheated from a rear freeze plug that blew out and the owner didn't shut it off in time.

Anyway, I was hoping to keep it going till I have time and the rest of the parts for the V8 swap. Just got the 8" rear in place today. need to bolt it down and get some Mustang shocks.
Took some pics to post for the 8 inch thread. It really is pretty much a bolt in...so far

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

pintoguy76

Yea it shouldnt be too bad to re-ring it. Dont forget to hone the cylinders and then clean everything up (again this is why it needs to be on the stand really. All that nastyness that comes off the cylinder walls could end up in the bearings otherwise). The rings may not seat or seal up very well (or so I am told)  if you dont hone the cylinder walls to clean them up before putting in new rings.

I had a chevy that beat your pinto in the oil consumption department.  It just had bad valve seals but it would send all that oil down the valve guides. It would use a 4 or 5 quarts of oil in 125 or 150 miles.  Never saw any smoke  while driving but it would be hard to start and would smoke like a freight train after sitting overnight. It would smoke for about 5 minutes, with a cloud of blue smoke so thick you couldnt see anything around you for that time. It was terrible. Never seen an engine do that before, but for some reason two chevy 350s i installed did that after i installed them, but didnt do that before i pulled  them from the vehicle they came from. Thats something I never figured out either.

So, perhaps you should check your valve seals? Your shortblock really shouldnt be worn out enough to use that much oil. Neither was mine on that 350, it was those valve seals. I'm not fond of a chevy 350 and i'll never own another one in my life, but that time I can honestly say it was just the valve seals and not because it was a worn out hunk o-junk like the rest of the 350s i'd had ever.
1974 Ford Pinto Wagon with 1991 Mustang DIS EFI 2.3 and stock Pinto 4 Speed

1996 Chevy C2500 Suburban with 6.5L Turbo Diesel/4L80E 4x2

1980 Volvo 265 with 1997 S-10 4.3 and a modified 700R4

2010 GMC Sierra SLE 1500 4x2 5.3 6L80E

Pangra74

You would think it would be leaking, but nope, no leaks. That much oil would leave a mess under the car or on the ground. Of course, maybe it doesn't burn much at a cold idle when the oil is thicker and as it gets hotter the oil gets past the rings. I'll probably just do it. What's another day or so of getting dirty!!
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

pintoguy76

Smoking on hard throttle is a sign of worn rings. But it sounds like its in too good of shape to be worn out bad enough to use that much oil. It almost has to be leaking it.
1974 Ford Pinto Wagon with 1991 Mustang DIS EFI 2.3 and stock Pinto 4 Speed

1996 Chevy C2500 Suburban with 6.5L Turbo Diesel/4L80E 4x2

1980 Volvo 265 with 1997 S-10 4.3 and a modified 700R4

2010 GMC Sierra SLE 1500 4x2 5.3 6L80E

Pangra74

It's been a strange thing. I checked the PCV system, changed the valve, you can feel it pulling air thru the valve cover. If you pull the PCV out there is no obvious blowby coming out of the hose. The car does smoke especially on hard acceleration, but at idle you don't see anything. Idles nice and steady. Funny thing is the smoke is dark grayish, not blue and the tailpipe is black and sooty. The cooling system is tight, no leaks. Exhaust smells pretty bad as well. I have Weber 32/36 carb on it which isn't supposed to be the best for a 2.3 and have wondered if the carb is gas washing the cylinders and thinning/burning the oil. I later found out from Weber that the carb kit I bought (Ebay) was designed more for a 2.0. it doesn't appear to be running too rich and needs the choke to start when cold. When I changed the head the cylinders were spotless, no crud or deposits, virtually no ridge at the top of the cylinders, and the plugs looked pretty good. I may just get another carb for it to eliminate that as a possibility.
1974 Orange Runabout
1974 soon to be Cruisin' Wagon

72pair

Seriously, a quart in a hundred miles. Is oil running out the tailpipe? I'd check the pvc system to make sure its not pulling oil. Another idea to try is pull the plugs and shoot some Marvel or penetrating oil in the cylinders and let it soak. Spin the engine over with no plugs to blow the oil back out. Messy, but this trick will free up sticky rings. If its just plain wore out then nothing but a rering will help. Good luck. JT
72 sedan 2.0, c-4 beater now hot 2.0, 4-speed
72 sedan 2.3, t-5, 8" running project
80 Bobcat hatchback 2.3, 4-spd, 97K

pintoguy76

I sure wouldn't want to try. I'd just pull the engine, its not that hard. I can have the engine out in about an hour, transmission and all.  You could have the engine out and back in in less time than it'd take you to fool with everything from underneath the car in restricted space.

Just my .02.
1974 Ford Pinto Wagon with 1991 Mustang DIS EFI 2.3 and stock Pinto 4 Speed

1996 Chevy C2500 Suburban with 6.5L Turbo Diesel/4L80E 4x2

1980 Volvo 265 with 1997 S-10 4.3 and a modified 700R4

2010 GMC Sierra SLE 1500 4x2 5.3 6L80E

Pangra74

Ok,

I'm driving to Fabulous Fords (6 hours) in April. I'm planning on a V8 swap this summer, but my car burs about a quart every 100 miles. That'll be 8 or so quarts round trip!! I already replaced the cylinder head. I did a ring job in a Pinto years ago, a 1600cc, and it wasn't too hard to get the pan off and back on as it had lots of clearance. Have any of you guys done a 2.3 in the car? Outside of dropping the steering rack out of the way, is it reasonably easy to get the pan off and back in after popping the pistons out? The car has a T-5 in it which also may limit how high I can raise the engine. Decisions, decisions...

Joe
1974 Orange Runabout
1974 soon to be Cruisin' Wagon