Mini Classifieds

1978 Pinto Wagon V8
Date: 04/28/2023 03:26 pm
1974 Pinto Drivers door glass and parts

Date: 02/28/2018 09:33 am
2.0 Mickey Thompson SUPER RARE Rocker cover and belt guard
Date: 08/22/2017 09:21 pm
6.6.75 carrier
Date: 02/14/2018 06:47 am
Seeking reveal molding for driver's door for a 1980 Squire Wagon
Date: 11/08/2020 02:10 pm
1978 hatch back

Date: 11/29/2019 03:18 pm
74 Pinto wagon armrests
Date: 01/18/2017 07:04 pm
Odds and Ends 1976-77 Pinto Wagon

Date: 07/17/2019 05:23 pm
Pinto hubcap
Date: 01/07/2017 08:40 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 642
  • Online ever: 2,670 (May 09, 2025, 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 152
  • Total: 152
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

referb the chrome trim on the interior bezel's

Started by Cookieboy, March 02, 2008, 12:35:58 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mytxplode

Quote from: dga57 on March 03, 2008, 09:20:14 PM
When I was working on the interior of my F150, I used a silver leafing pen that I purchased at my local craft store.  That was four years ago and it still looks great.  Provides a somewhat shinier finish than the paint pens and permanent markers.  Since then, I have done the same on my buddy's Thunderbird and intend to do it again on my Pinto once I have the other interior stuff finished. :)
Dwayne
WORKED GREAT! Thanks Dwayne!
It's only good if it works!

Crazybry79

Well, I tried it, and it works fairly well.  I made a new thread here

http://www.fordpinto.com/index.php/topic,13314.0.html

Like it says, wrong color, but it did work.  Now, I may think about using a suppliment adhesive, just to make sure it's permanent.  Maybe a clearcoat over the finished product.

Why do you park in a driveway, and drive in a parkway?  A cargo goes by ship, a shipmeny goes by truck.....You have a pair of panties, but just one bra......

Crazybry79

bluepinto,

The stuff comes on rolls, normally in 10yd incriments (aprox 30 feet).  Rolls normally cost $50-$75.  But that is WAAAAAAY too much material for what you need....heck, you could dang near do a whole car with 3 rolls.

On that thought..... :laugh: :o

j/k

Anyways...I go through alot of stuff like that, and if someone needed, sat 1/16" strips, by 24" long, I can get THAT done cheeeap.  If the peices are smaller yet (envelope size) thatd save on shipping too.

If Im thinking of the same peices you are, the chrome is roughly 3/8" wide.  Well, I can cut 3/8....probly better with1/2" strips, then just trim the excess.

I can cut any size.  Basicly I am running a few inches off the roll, and cutting lines in it every xx.xxx" (what ever width needed) so there are strips for you to use.

Ive NEVER tried this....BUT, I do have an old dash cluster off a parts car I think Im gonna go outside and retreive......MAYBE, we'll see what we can do here!  Ill keep ya'll posted!
Why do you park in a driveway, and drive in a parkway?  A cargo goes by ship, a shipmeny goes by truck.....You have a pair of panties, but just one bra......

blupinto

What is the price for a sheet of this sign vinyl? The "chrome" on my deluxe door panels is peeling off, and what that shiny stuff was mounted on is soft plastic- not ideal to use a pen or paint on.  :)
One can never have too many Pintos!

Crazybry79

Im going to bring up another ancient thread.....sorry

But how about sign vinyl?

I run a sign business, and we have mirror chrome vinyl. 
http://www.oracal.com/products/all-colors.asp?seriesID=176
This does NOT show what the chrome looks like - actual product is MIRROR like, just like new chrome.

I can cut this into (size??)1/16" strips at any reasonable length (up to 30 yds) relatively cheap.  The strips apply similar to a decal, can be trimmed easily, and are semi formable (go around corners)  For the guages...I would cut out circles the size of the guages, then trim to fit, and free hand cut the excess to be used elsewhere.

Just an idea!

Ohhhh!  You wanna be fussy??  You want red chrome?  Blue chrome?  Gold???  All possibilities! ;)
http://cgi.ebay.com/SIGN-VINYL-SMOOTH-CHROME-BLUE-8-10-X-5YD-COBURN_W0QQitemZ130334184488QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1e5885d428
http://cgi.ebay.com/SIGN-VINYL-CHROME-SILVER-24-X-10YD-COBURN-NEW_W0QQitemZ130335012076QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item1e589274ec
Why do you park in a driveway, and drive in a parkway?  A cargo goes by ship, a shipmeny goes by truck.....You have a pair of panties, but just one bra......

dave1987

As long as it isn't a paint, it should be okay. I know that the chrome paints like rust-oleum or krylon are just metallic flake added to the paint, and if you touch it (even after drying) it will turn gray because the metallic flakes are flattened out.

Hopefully this isn't the same about this metallic coating you are looking into. I would love to hear your results, so keep us updated! :D
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

discolives78

Ok, I ran across this in a model car magazine and checked out the website, its called Alclad 2, it is a metallic coating for model cars and airplanes. It is applied with an airbrush. Maybe this will help. I am going to order some "chrome" and try it (I already have an airbrush)

http://www.alclad2.com/alclad-home.html



A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

dave1987

The Bare Metal Foil "solution" won't work for this application.

It has been cold and damp here in Idaho for about three weeks now.

I went out to my storage unit to get my snow tires out and took a look at the bezel I did work on. The foil is bubbling up in spots and makes it look nasty.

Hmm, what other possible permanent solutions might there be?


Thanks for the offer Chuck! However, until we can think of another way of doing this, I recommend you hang onto it. :)
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

discolives78

Looks good! I have an extra bezel if you want it (I just changed mine, remember?) PM me your name and address and I will send it to you when I get paid on the 7th.

Chuck


A virtual version of my last Pinto. Was Registered Ride #111. Missed every day.

dave1987

Thanks Chris and r4pinto!

I am currently looking for another bezel, as I would like to try a different approach of applying the foil. Updates will be posted when I find one. :)
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

r4pinto

That looks great. Step by step breakdowns would be great so we can try if we like.
Matt Manter
1977 Pinto sedan- Named Harold II after the first Pinto(Harold) owned by my mom. R.I.P mom- 1980 parts provider & money machine for anything that won't fit the 80
1980 Pinto Runabout- work in progress

popbumper

Nice work Dave! I love the initiative and ingenuity in this group. All of these small but important restoration tips really make a large stride towards excellent restorations. I am regularly "thwarted" by the overabundance of inexpensive (well, everything is relative) and abundant reproduction parts for Mustangs and many, many other cars. While we are forced to "make due" with used parts, the efforts here are remarkable and worthwhile.

I hope one day that Pinto parts will be a common sight, not an exception. Until then, nice work!!

Chris
Restoring a 1976 MPG wagon - purchased 6/08

dave1987

Last night I finished the gauge bezel that I pulled from the 77 Bobcat for experimentation. Total work time came out to 7 - 8 hours, consisting of removing the original material by means of a polishing compound (so as not to scratch the plastic), cleaning, applying the foil, burnishing, masking, painting, clear coating and touch-up.

The foil is thinner than paper, which makes it difficult to work with without tearing. Not only this, but the slightest defect or foreign object beneath the foil on the base surface will show though, which means that the prep process must be perfect for a good looking final product. Covering a curve like the gauge holes was not easy, and when burnishing the edge of the foil it wrinkled slightly.

Overlapping the foil was just as I feared. The foil is so thin that even overlapping surfaces shows through. The only way I found to ensure it looked nice in the end, was to do a 1/16 inch overlap, keeping defects to a minimum. Which Started out just fine until after I removed the masking tape and the foil came up and tore a little bit in a couple spots. This left me with having to cut out a small piece of foil to cover up the hole, adding one more overlap.

The first picture below shows the bezel after all of the foil is applied. Notice that the foil wraps around the edges with excess foil on the sides. I did this so that after painting and clear coating, the paint and clear coat would help to hold the foil to the bezel, keeping the foil from being torn off when detailing gauge cluster with a micro fiber towel.

Overall it came out pretty nice. Although the photos make it look better than it does in person. I am not saying that it doesn't look nice, but when the bezel is in direct sunlight, the overlaps of the foil come out much clearer and it gives the shinny surface a rough appearance.

1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

I ordered two 6" x 11 1/2" sheets of ultra bright chrome bare metal foil and a bottle of adhesion promoter for it tonight. I should have it here by Saturday this week or Monday next week. I will be pulling the extra instrument cluster face out of my storage unit tomorrow to clean up and prep for experimentation. Updates will be following!
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dave1987

I took apart my cluster gauge last night to detail clean the gauges and mounting bezels and paint the center of the dials with some silver testor's paint. It seems almost 60% of the front bezel is chromed. I do not know if they used a plating process or what but it seems to have somewhat of an over spray. This could also be due to them painting over the chrome to make the front bezels black.

There are a few things I am planning to experiment with in order to find something that matches to the stock appearance, and I will definitely keep everyone up to date with my tests.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dga57

Mirror-like?  I wouldn't say that... but, then, the edging used originally wasn't either.  I'll be interested to hear your thoughts on the bare metal foil.  I've used it some in building models and found it to be more trouble than it's worth... not easy to work with at all.  Your experience, however, may be quite different.  Keep us posted on the outcome.
Dwayne :smile:
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

dave1987

How mirror like is this Krylon leafing pen??


I received word back about the bare-metal foil. The guy I have been talking too said as long as the base layer is applied flat and correctly, the foil is so thin that it should not have any "hump" or see-through of overlapping at all. I may purchase a sheet and make an attempt.

Here is something interesting I just found:

http://www.scalemodelingbychris.com/alclad.htm#1%20oz.%20CHROMEPrice%20$8.95

http://www.spazstix.com/xcart/home.php?cat=300
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

dga57

Hi!
This is the first time I've been on the computer since I posted about the silver leafing pen.  I was going to answer Pintony's request for more information but it looks like you've already found it.  The one I used was made by Krylon, same as in the link.  Works like a charm!
In an unrelated matter, I continue to be unsuccessful with posting photos of those quarter panels I bought from Black Car Parts.  My son worked on trying to post them for about three hours Sunday.  He has resized them using three different programs and we still get the "too big" message!  I haven't forgotten about it... I just can't seem to make it work.  Sorry.  :embarrassed:
Dwayne
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

Cookieboystoys

It's all about the Pintos! Baby!

phils toys

pintony,
the counterpart to the one i used is a gold leafing pen, the silver was not listed as a leafing pen, but was listed to be used for the same things.
phils toys.
2006, 07,08 ,10 Carlisle 3rd stock pinto 4 years same place
2007 PCCA East Regional Best Wagon
2008 CAHS Prom Coolest Ride
2011,2014 pinto stampede

Pintony

Quote from: dga57 on March 03, 2008, 09:20:14 PM
When I was working on the interior of my F150, I used a silver leafing pen that I purchased at my local craft store.  That was four years ago and it still looks great.  Provides a somewhat shinier finish than the paint pens and permanent markers.  Since then, I have done the same on my buddy's Thunderbird and intend to do it again on my Pinto once I have the other interior stuff finished. :)
Dwayne
Hello Dwayne,
Please tell us more about this leafing pen?
Manufacturor or part #s
From Pintony

Cookieboystoys

WOW! I'm glad I posted this. Looks like some great ideas.
It's all about the Pintos! Baby!

dga57

When I was working on the interior of my F150, I used a silver leafing pen that I purchased at my local craft store.  That was four years ago and it still looks great.  Provides a somewhat shinier finish than the paint pens and permanent markers.  Since then, I have done the same on my buddy's Thunderbird and intend to do it again on my Pinto once I have the other interior stuff finished. :)
Dwayne
Pinto Car Club of America - Serving the Ford Pinto enthusiast since 1999.

phils toys

I found a different paint marker in the craft department  made by Elmers  called Metallic Painters  it comes in 2 different tips fine and medium I used the  medium, but the fine would have been better for some parts It gives more of a metallic look than the testors silver that i had tried before.
Phils toys
2006, 07,08 ,10 Carlisle 3rd stock pinto 4 years same place
2007 PCCA East Regional Best Wagon
2008 CAHS Prom Coolest Ride
2011,2014 pinto stampede

dave1987

It definitely gives the interior a fresher look!

I just redid the paint around the air ducts and my heater controls with some Testor's silver model paint. It wasn't easy to apply at all, but it looks a lot better. I wish I would have known about this before then!

I've been communicating with a company online by the name of Bare-Metal Foil Co. They product a thin chrome foil that is applied to model cars to give them a very realistic chrome look. They sell this foil in sheets of 6" x 11 1/2". I have been trading emails inquiring whether or not it would be an ideal subsitute for the original chrome on the gauge cluster trim on a real world vehicle. The person I am communicating with is telling me that he does not see any problem with it, but if the gauge hole is wider than 6" it would be best to cut two half circles and apply the chrome trim in two parts. I am still curious as to how well it would come out, but I would suspect overlapping of two sections may create a hump in the foil. I am still awaiting a reply on this concern.
1978 Ford Pinto Sedan - Family owned since new

Remembering Jeff Fitcher with every drive in my 78 Sedan.

I am a Pinto Surgeon. Fixing problems and giving Pintos a chance to live again is more than a hobby, it's a passion!

Cookieboystoys

and some pictures after I finished...

BTW... also works on the lettering on the wiper and headlight switch and doesn't block the backlight.
It's all about the Pintos! Baby!

Cookieboystoys

I have passed this on to a couple other members and used it myself so thought I should do up a little tutorial.

here is a "cheap trick" to  referb the chrome trim on the interior bezel's

Sharpie makes a silver permanent marker... I've seen them at Wal-Mart and Office Supply Stores.

It will not be an exact match for the chrome strip from factory but... if you do it all... it looks a lot better.

The only tip I have when doing it is the tip of the marker needs to be nice and wet. No old dried up markers and buy 2. One way to get the tip real wet is to shake the marker with the tip away from you. Grab some napkins and be careful as the cap will fill with ink and the tip of the marker will get messy, that's what the napkins are for. Anyone who has used the sharpie markers on plastic will know if you keep tryng to do the same area over and over it will not turn out even and keeps coming off. With a really wet tip it will cover in one pass and look good. With the tip nice and wet it's almost like painting it on. Take it in baby steps and take your time and will look great when done.

now... some before pictures on my 77 cruising wagon...
It's all about the Pintos! Baby!