Mini Classifieds

t-5 2.3 trans and new flywheel cluch and pressure plate though out bearing for sale
Date: 09/12/2018 04:07 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/28/2018 09:18 am
WANTED Hood Prop Rod
Date: 01/17/2017 02:47 pm
72 pinto drag car

Date: 07/08/2017 08:25 pm
Wheels and Parts

Date: 07/06/2018 04:50 pm
Bumper Guards
Date: 03/28/2017 09:27 pm
1974 Pinto Passenger side door glass and door parts

Date: 02/18/2017 05:55 pm
Wanted - 71-73 Pinto grill
Date: 12/15/2016 03:32 pm
Pinto in Maine for sail...solid body

Date: 03/07/2017 07:03 pm

Why the Ford Pinto didn’t suck

Why the Ford Pinto didn't suckThe Ford Pinto was born a low-rent, stumpy thing in Dearborn 40 years ago and grew to become one of the most infamous cars in history. The thing is that it didn't actually suck. Really.

Even after four decades, what's the first thing that comes to mind when most people think of the Ford Pinto? Ka-BLAM! The truth is the Pinto was more than that — and this is the story of how the exploding Pinto became a pre-apocalyptic narrative, how the myth was exposed, and why you should race one.

The Pinto was CEO Lee Iacocca's baby, a homegrown answer to the threat of compact-sized economy cars from Japan and Germany, the sales of which had grown significantly throughout the 1960s. Iacocca demanded the Pinto cost under $2,000, and weigh under 2,000 pounds. It was an all-hands-on-deck project, and Ford got it done in 25 months from concept to production.

Building its own small car meant Ford's buyers wouldn't have to hew to the Japanese government's size-tamping regulations; Ford would have the freedom to choose its own exterior dimensions and engine sizes based on market needs (as did Chevy with the Vega and AMC with the Gremlin). And people cold dug it.

When it was unveiled in late 1970 (ominously on September 11), US buyers noted the Pinto's pleasant shape — bringing to mind a certain tailless amphibian — and interior layout hinting at a hipster's sunken living room. Some call it one of the ugliest cars ever made, but like fans of Mischa Barton, Pinto lovers care not what others think. With its strong Kent OHV four (a distant cousin of the Lotus TwinCam), the Pinto could at least keep up with its peers, despite its drum brakes and as long as one looked past its Russian-roulette build quality.

But what of the elephant in the Pinto's room? Yes, the whole blowing-up-on-rear-end-impact thing. It all started a little more than a year after the Pinto's arrival.

 

Grimshaw v. Ford Motor Company

On May 28, 1972, Mrs. Lilly Gray and 13-year-old passenger Richard Grimshaw, set out from Anaheim, California toward Barstow in Gray's six-month-old Ford Pinto. Gray had been having trouble with the car since new, returning it to the dealer several times for stalling. After stopping in San Bernardino for gasoline, Gray got back on I-15 and accelerated to around 65 mph. Approaching traffic congestion, she moved from the left lane to the middle lane, where the car suddenly stalled and came to a stop. A 1962 Ford Galaxie, the driver unable to stop or swerve in time, rear-ended the Pinto. The Pinto's gas tank was driven forward, and punctured on the bolts of the differential housing.

As the rear wheel well sections separated from the floor pan, a full tank of fuel sprayed straight into the passenger compartment, which was engulfed in flames. Gray later died from congestive heart failure, a direct result of being nearly incinerated, while Grimshaw was burned severely and left permanently disfigured. Grimshaw and the Gray family sued Ford Motor Company (among others), and after a six-month jury trial, verdicts were returned against Ford Motor Company. Ford did not contest amount of compensatory damages awarded to Grimshaw and the Gray family, and a jury awarded the plaintiffs $125 million, which the judge in the case subsequently reduced to the low seven figures. Other crashes and other lawsuits followed.

Why the Ford Pinto didn't suck

Mother Jones and Pinto Madness

In 1977, Mark Dowie, business manager of Mother Jones magazine published an article on the Pinto's "exploding gas tanks." It's the same article in which we first heard the chilling phrase, "How much does Ford think your life is worth?" Dowie had spent days sorting through filing cabinets at the Department of Transportation, examining paperwork Ford had produced as part of a lobbying effort to defeat a federal rear-end collision standard. That's where Dowie uncovered an innocuous-looking memo entitled "Fatalities Associated with Crash-Induced Fuel Leakage and Fires."

The Car Talk blog describes why the memo proved so damning.

In it, Ford's director of auto safety estimated that equipping the Pinto with [an] $11 part would prevent 180 burn deaths, 180 serious burn injuries and 2,100 burned cars, for a total cost of $137 million. Paying out $200,000 per death, $67,000 per injury and $700 per vehicle would cost only $49.15 million.

The government would, in 1978, demand Ford recall the million or so Pintos on the road to deal with the potential for gas-tank punctures. That "smoking gun" memo would become a symbol for corporate callousness and indifference to human life, haunting Ford (and other automakers) for decades. But despite the memo's cold calculations, was Ford characterized fairly as the Kevorkian of automakers?

Perhaps not. In 1991, A Rutgers Law Journal report [PDF] showed the total number of Pinto fires, out of 2 million cars and 10 years of production, stalled at 27. It was no more than any other vehicle, averaged out, and certainly not the thousand or more suggested by Mother Jones.

Why the Ford Pinto didn't suck

The big rebuttal, and vindication?

But what of the so-called "smoking gun" memo Dowie had unearthed? Surely Ford, and Lee Iacocca himself, were part of a ruthless establishment who didn't care if its customers lived or died, right? Well, not really. Remember that the memo was a lobbying document whose audience was intended to be the NHTSA. The memo didn't refer to Pintos, or even Ford products, specifically, but American cars in general. It also considered rollovers not rear-end collisions. And that chilling assignment of value to a human life? Indeed, it was federal regulators who often considered that startling concept in their own deliberations. The value figure used in Ford's memo was the same one regulators had themselves set forth.

In fact, measured by occupant fatalities per million cars in use during 1975 and 1976, the Pinto's safety record compared favorably to other subcompacts like the AMC Gremlin, Chevy Vega, Toyota Corolla and VW Beetle.

And what of Mother Jones' Dowie? As the Car Talk blog points out, Dowie now calls the Pinto, "a fabulous vehicle that got great gas mileage," if not for that one flaw: The legendary "$11 part."

Why the Ford Pinto didn't suck

Pinto Racing Doesn't Suck

Back in 1974, Car and Driver magazine created a Pinto for racing, an exercise to prove brains and common sense were more important than an unlimited budget and superstar power. As Patrick Bedard wrote in the March, 1975 issue of Car and Driver, "It's a great car to drive, this Pinto," referring to the racer the magazine prepared for the Goodrich Radial Challenge, an IMSA-sanctioned road racing series for small sedans.

Why'd they pick a Pinto over, say, a BMW 2002 or AMC Gremlin? Current owner of the prepped Pinto, Fox Motorsports says it was a matter of comparing the car's frontal area, weight, piston displacement, handling, wheel width, and horsepower to other cars of the day that would meet the entry criteria. (Racers like Jerry Walsh had by then already been fielding Pintos in IMSA's "Baby Grand" class.)

Bedard, along with Ron Nash and company procured a 30,000-mile 1972 Pinto two-door to transform. In addition to safety, chassis and differential mods, the team traded a 200-pound IMSA weight penalty for the power gain of Ford's 2.3-liter engine, which Bedard said "tipped the scales" in the Pinto's favor. But according to Bedard, it sounds like the real advantage was in the turns, thanks to some add-ons from Mssrs. Koni and Bilstein.

"The Pinto's advantage was cornering ability," Bedard wrote. "I don't think there was another car in the B. F. Goodrich series that was quicker through the turns on a dry track. The steering is light and quick, and the suspension is direct and predictable in a way that street cars never can be. It never darts over bumps, the axle is perfectly controlled and the suspension doesn't bottom."

Need more proof of the Pinto's lack of suck? Check out the SCCA Washington, DC region's spec-Pinto series.

Members
Stats
  • Total Posts: 139,575
  • Total Topics: 16,267
  • Online today: 2,670
  • Online ever: 2,670 (Today at 01:57:20 AM)
Users Online
  • Users: 0
  • Guests: 580
  • Total: 580
F&I...more

My Somewhat Begrudging Apology To Ford Pinto

ford-pinto.jpg

I never thought I’d offer an apology to the Ford Pinto, but I guess I owe it one.

I had a Pinto in the 1970s. Actually, my wife bought it a few months before we got married. The car became sort of a wedding dowry. So did the remaining 80% of the outstanding auto loan.

During a relatively brief ownership, the Pinto’s repair costs exceeded the original price of the car. It wasn’t a question of if it would fail, but when. And where. Sometimes, it simply wouldn’t start in the driveway. Other times, it would conk out at a busy intersection.

It ranks as the worst car I ever had. That was back when some auto makers made quality something like Job 100, certainly not Job 1.

Despite my bad Pinto experience, I suppose an apology is in order because of a recent blog I wrote. It centered on Toyota’s sudden-acceleration problems. But in discussing those, I invoked the memory of exploding Pintos, perpetuating an inaccuracy.

The widespread allegation was that, due to a design flaw, Pinto fuel tanks could readily blow up in rear-end collisions, setting the car and its occupants afire.

People started calling the Pinto “the barbecue that seats four.” And the lawsuits spread like wild fire.

Responding to my blog, a Ford (“I would very much prefer to keep my name out of print”) manager contacted me to set the record straight.

He says exploding Pintos were a myth that an investigation debunked nearly 20 years ago. He cites Gary Schwartz’ 1991 Rutgers Law Review paper that cut through the wild claims and examined what really happened.

Schwartz methodically determined the actual number of Pinto rear-end explosion deaths was not in the thousands, as commonly thought, but 27.

In 1975-76, the Pinto averaged 310 fatalities a year. But the similar-size Toyota Corolla averaged 313, the VW Beetle 374 and the Datsun 1200/210 came in at 405.

Yes, there were cases such as a Pinto exploding while parked on the shoulder of the road and hit from behind by a speeding pickup truck. But fiery rear-end collisions comprised only 0.6% of all fatalities back then, and the Pinto had a lower death rate in that category than the average compact or subcompact, Schwartz said after crunching the numbers. Nor was there anything about the Pinto’s rear-end design that made it particularly unsafe.

Not content to portray the Pinto as an incendiary device, ABC’s 20/20 decided to really heat things up in a 1978 broadcast containing “startling new developments.” ABC breathlessly reported that, not just Pintos, but fullsize Fords could blow up if hit from behind.

20/20 thereupon aired a video, shot by UCLA researchers, showing a Ford sedan getting rear-ended and bursting into flames. A couple of problems with that video:

One, it was shot 10 years earlier.

Two, the UCLA researchers had openly said in a published report that they intentionally rigged the vehicle with an explosive.

That’s because the test was to determine how a crash fire affected the car’s interior, not to show how easily Fords became fire balls. They said they had to use an accelerant because crash blazes on their own are so rare. They had tried to induce a vehicle fire in a crash without using an igniter, but failed.

ABC failed to mention any of that when correspondent Sylvia Chase reported on “Ford’s secret rear-end crash tests.”

We could forgive ABC for that botched reporting job. After all, it was 32 years ago. But a few weeks ago, ABC, in another one of its rigged auto exposes, showed video of a Toyota apparently accelerating on its own.

Turns out, the “runaway” vehicle had help from an associate professor. He built a gizmo with an on-off switch to provide acceleration on demand. Well, at least ABC didn’t show the Toyota slamming into a wall and bursting into flames.

In my blog, I also mentioned that Ford’s woes got worse in the 1970s with the supposed uncovering of an internal memo by a Ford attorney who allegedly calculated it would cost less to pay off wrongful-death suits than to redesign the Pinto.

It became known as the “Ford Pinto memo,” a smoking gun. But Schwartz looked into that, too. He reported the memo did not pertain to Pintos or any Ford products. Instead, it had to do with American vehicles in general.

It dealt with rollovers, not rear-end crashes. It did not address tort liability at all, let alone advocate it as a cheaper alternative to a redesign. It put a value to human life because federal regulators themselves did so.

The memo was meant for regulators’ eyes only. But it was off to the races after Mother Jones magazine got a hold of a copy and reported what wasn’t the case.

The exploding-Pinto myth lives on, largely because more Americans watch 20/20 than read the Rutgers Law Review. One wonders what people will recollect in 2040 about Toyota’s sudden accelerations, which more and more look like driver error and, in some cases, driver shams.

So I guess I owe the Pinto an apology. But it’s half-hearted, because my Pinto gave me much grief, even though, as the Ford manager notes, “it was a cheap car, built long ago and lots of things have changed, almost all for the better.”

Here goes: If I said anything that offended you, Pinto, I’m sorry. And thanks for not blowing up on me.

2.3 turbo tips?? 73 runabout first car.

Started by Nachoooooo!!, January 29, 2012, 05:08:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Wittsend

I've put a 2.3 Turbo/T-5 in my '73 wagon. It was a 2.0, C-4, 6.75 car to start. Frankly it seems like a 2-3 on a scale of 10, but in reality it is a hard 7. So, here are some issues you will have (note the '73 has a one year only steering rack):

1. As stated you will need cut out the 2.0 engine mounts and weld in a set of 2.3's. It is critical you get the mounts just right. And, no it can't be described, only experienced.  I had my engine in/out seven times before I was willing to commit to welding.

2a. There is a rather bulbous section on the '73 steering rack. I ground/filed mine down for added oil pan clearance.  I also dimpled my oil pan slightly for additional clearance.

2b. I have the '88 engine which has the lowered intake and notched valve cover.  That said I have only about 1/8" clearance between the rack on the bottom and the hood at the top.  I notched the ends on my intercooler. And..., by the way the intercooler (if are using one - the stock one) needs air.  The Nissan 300 ZX is probably the better of the scoops available.

2c.  I can not emphasis enough the clearance issues so make sure you consider EVERYTHING before you weld the engine mounts in!!! I slotted all my engine/transmission mounts to fine tune this very tight installation.

3. You will need the Pinto 2.3 oil pan and pick up. The turbo cars have the sump on the wrong end. Getting the pick up out of a donor engine can be a hassle because of the bolt placement (and I recall 12 point bolts???). You will need the Pinto dipstick too. The Turbo Coupe stick will transfer, but the mounting hole is not in the same vertical plane.  I did reuse mine, but re-calibrated it to compensate.

4. My engine was an '88 Turbo Coupe. The waste gate actuator has clearance issues with the inner panel.  Pre-'87 engines might not have such an issue???. Since my battery had rotted out a fair amount of the inner fender I just put in a whole new panel fabricated with clearance in mind.

5. As stated the exhaust 90 degree down casting will hit the stock heater fan. Some use the A/C configuration with the fan in the engine compartment.  I adapted a MG Midget fan with very minor fabrication and have more than adequate clearance.   I'd also recommend filing the bolt slots in the exhaust 90 degree down casting to get it to rotate inward as much as possible. Other wise you will have clearance issues with  the exhaust pipe and the frame rail.

6. A radiator upgrade from the 17" to the 20" is recommended.  If you do it right the cradle isn't compromised, but it requires thinking it through, cutting in the right places and welding.

7. An electric fan should be and likely will need to be used. You can wire it to trigger off the computer and trip a relay. I mounted mine as a pusher.

8. A number of Ford pick up trucks used an external fuel pump that will work. You will also need the filter and high pressure lines.  Make sure you mount everything low enough to gravity feed, but high enough not to get hit.  You will also need to fashion a return line.  I drilled a hole and soldered a tube to the gauge sender. If you do it that way be careful as the gauge wire insulator can melt.

9. If your T-5 is from a pre-'87 car you can use the bell crank for the clutch. The levers will have to be bent a small amount to bring then into the right location.  If you have a 87-88 you will have to get the earlier bell housing.  I used a stock Pinto cable and built my own mount that bolts to the bell housing (where the original cable mounted). The cable barely clears the crossmember, but it works.

10. Yes, you will have to cut the transmission tunnel for the T-5.  I hated the shifter location and cut/welded my lever to suit regarding body build and location liking.  The rear transmission crossmember can be reversed and the holes slotted to meet the T-5. There are issued with the T-5 speedometer gear. Search this site because I can't recall the exact problem  I only know that when I used the C-4 gear with the T-5 it bound tight on install and caused the main shaft speedometer gear to back out. It was a pain to get it back without removing the tail housing. Ideal speedometer calibration would best be accomplished by replacing both gears.

11. If you have a manual transmission car you are in good shape. If not be careful because there are about four different pedal configurations on the Pinto's.  You want the early pedals.

12. The driveshaft might work... .  I had a 2.0/C-4/6.75" rear.  When I put in the 2.3, T-5 and swapped out the 6.75" for a 8" rear the original driveshaft fit perfectly. Note that the 8" rear is highly recommend. Most often 3.00 or 3.55 gear are available but you might find 3.40 as they were also available.  Consider your tire size and performance/mileage expectations when selecting ratio's.  I think 3.25 gear would be ideal, but only a very select few Fords ever had them in 8" configuration.  Given I used 3.00 with 13" tires I'd recommend 3.40's. And, if your using any tire larger than 13" get the 3.55's.

I won't even get to the wiring because you need to get this far before those issues pop up. All I will tell you is that the 87-88 harness is a nightmare.

  If you search my posts "Wittsend" I have a lot of the stuff I mentioned with some pictures.  Look especially at the '08-'09 years when I did most of the work. Going to the actual post will provide pictures that aren't in the post summary.

All the best.  I don't want to discourage a willing soul, but it is truly a significant amount of work.

Tom



Nachoooooo!!


fast64ranchero

You have to change the Frame mounts from 2.0 to 2.3's, install a EFI pump, cut the tunnel for the T-5 shifter,  either cut the hood or rotate the intake 90 degs, change the heater blower motor to a Air, conditioned car blower, and sort the wiring.
71 Pro-Street pinto 2.3T powered
72 Treasure Valley Special 26K miles pinto
72 old V-8 parts Pinto
73 pinto, the nice one...

bbobcat75

more then likly you will have to cut the floor a little the t5 is longer, will have to put in a electric fuel pump. there is a ton of work to do this and to do it right, plenty of guys on here have done the swap, but all say it was a lot of time and work, good luck

eric
1975 mercury bobcat 2.8 auto
1975 ford pinto - drag car - 2.3l w/t5 trans - project car

Nachoooooo!!

Hey all, im 17 and live in washington..  i blew up the original 2.0 in my 73 pinto..  50/50 my fault. Haha  just bought a 2.3 turbo off craigslist.  Its efi, with a la2 computer. With a t5. Will i havto change alot? Fuel tank? Driveline?  Cut holes in the floor for new shifter? Im not too keen on hacking her up cause shes like my most prized possesion.. anything i need to know before starting? I intend on track raceing her.. thanks in advance.