Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: volksnut on June 09, 2008, 09:03:15 PM

Title: Lower EFI intake with carb
Post by: volksnut on June 09, 2008, 09:03:15 PM
Anyone use one on the street? If so hows the low speed running, I know the circle track guys use them with a carb adapter, but at WOT. Just wondering as the runners are all separate...thanks 
Title: Re: Lower EFI intake with carb
Post by: volksnut on June 17, 2008, 09:05:55 PM
anyone?
Title: Re: Lower EFI intake with carb
Post by: turbopinto72 on June 17, 2008, 09:08:37 PM
I just built an adapter for a Holley 500. I will let you know how it is. So far it starts right up , revs nice and idles great.
Title: Re: Lower EFI intake with carb
Post by: dick1172762 on June 17, 2008, 10:39:42 PM
Will it clear the stock hood????? Looks very close.
Title: Re: Lower EFI intake with carb
Post by: turbopinto72 on June 17, 2008, 10:48:25 PM
Yes, it clears the stock hood by 2". I did , however take about 1/2 off the base of the manifold AND, my engine may be slightly lower than others as its a 72 and I lowered the motor mounts.
Title: Re: Lower EFI intake with carb
Post by: volksnut on June 22, 2008, 10:37:45 PM
any pictures, I would like to see    thanks
Title: Re: Lower EFI intake with carb
Post by: volksnut on June 29, 2008, 08:57:17 PM
any pictures yet? Anyone else
Text only | Text with Images