Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: ip_phreak on May 15, 2008, 06:12:11 PM
:lost: I need help finding the:
1) Temperature gauge
2) Oil Pressure Sending Unit
3) Water Temp Sending Unit
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
All on a 4 cylinder 122HP 2000cc Engine
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1971 Ford PInto
under the hood attached to the engine
not to be a smart*ss but ik that thanks for helping though..lol
What i meant was "where on the engine is it located?"
:welcome: The temp sender is on the pass side under the exhaust manifold near the back of the block, the oil press sender is on the driver side under the intake near the back. Not sure what you mean by " temp gauge" it doesn't have a gauge just an idiot light
Dead on the money.... it has AN idiot light. One, that says "engine" if it comes on SHUT 'ER DOWN. It could be overheating, it could be out of oil. Either way you're hurting the engine!
I agree with 71pintoracer and Crazyhorse!!
From Pintony
What i meant about "temp gauge" where the antifreeze sensor was....lol but yea i found them and but in new gauges and the stupid temp gauge doesn't work >:( these are like $50 gauges and they don't work!!!!!!