Print Page - Pinto disc's

Title: Pinto disc's
Post by: ocfirefossil on April 27, 2008, 01:12:04 PM

I'm putting disc brakes on my 71. I have a set up from a 71. I'm switching to 5 bolt rotors. I've been told two different stories. One, is that the rotors will fit the 71 disc spindles and the other is that I need Mustang two type spindles with a different upper ball joint. Can anyone verify this info. Thx

Title: Re: Pinto disc's
Post by: Pintony on April 27, 2008, 01:14:24 PM

Hello ocfirefossil,
You can use the street rod 9" rotors if you machine them to fit.
From Pintony

Title: Re: Pinto disc's
Post by: ADaughen on April 27, 2008, 03:48:23 PM

Welcome to the forum!

This is what Pintony is talking about:
http://www.fordpinto.com/smf/index.php/topic,6390.0.html

They have a pretty decent selection of FAQs at the bottom of the board.
http://www.fordpinto.com/smf/index.php/board,15.0.html

If you can't find what you are looking for there, feel free to ask, I do. ;D

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: ocfirefossil on April 27, 2008, 01:12:04 PM