Pinto Car Club of America

These wheels with Pinto are compatible?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=USW%2D97%2D5725P&N=700+4294923107+4294923105+4294755964+4294793325+4294755966+115&autoview=sku

http://store.summitracing.com/partdetail.asp?autofilter=1&part=USW%2D26%2D5725&N=700+4294923107+4294923105+4294755964+4294793325+4294755966+115&autoview=sku

thanks

That first set you have a link for, I used to have on my car.  Also, I would think that if the first set I KNOW fit, than the other ones made by the same people should.  As long as they are 4 x 4.25 bolt pattern, they will work.  However, be sure to check the back spacing and make sure they will clear.  If you don't know how to do that, there is usually an instruction article on summit or jegs website to explain it.  It is pretty simple.  As for aluminum rims, however, sometimes you have to watch on 13" or even 14" to be sure that they don't rub the calipers.  (They tend to be thicker than steelies, and sometimes even have different "steps" inside the rim, especially reverse mount wheels.)