Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: John on June 18, 2003, 10:45:59 PM
I was checking on the way a 1979 2.3 VACUUM LINES were connected and found what seems to be errors ??? The Distributor was connected to the Rear manifold PORT .... I have FORD's 1979 shop manuals and really they don't seem to show very clearly where emission / vacuum connections go. BUT IT APPEARS THAT THE DISTRIBUTOR PROBABLY OR MAYBE IS CONNECTED TO ONE OF THE CONNECTIONS ON THE CARB ("PORTED VACUUM CONNECTION") ??????? D O E S A N Y O N E K N O W ?????
There are some vacuume lines diagrams in the files section of the Pinto Mailing list group.
(http://f1.grp.yahoofs.com/v1/4MHxPjkFgZBFvKIUZZ-eU2y3h8PXYVk3SJ0IAL7_Q1rMcfICx3oHm_CwvZzQgM77y2cWTHM2uP-6ZmxH/Technical%20Info/79vac_sys.gif)
If the above pic doesn't work, goto http://autos.groups.yahoo.com/group/pinto/files/Technical%20Info/ (http://autos.groups.yahoo.com/group/pinto/files/Technical%20Info/) and click on the 79vac_sys.gif .
Hope this helps,