Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: phils toys on February 24, 2008, 09:07:14 PM
My bobcat with ac had the steal heater tube from the "h" pipe to the water pump removed when i got it an was replaced by straight heater hose that eventually rubbed on the smog pump . Fortunately i have been working under the hood cleaning it up and replacing parts when i saw how bad the hose was. After searching for my parts car steal tube unsuccessfully and looking on line for a replacement unsuccessfully i decide to see how close i could get at the parts store just by describing what i needed.( Big advantage of living in a small town they have time to listen and look for many parts) They found one close enough here is a link just in case some one else may need it.
http://www.partsamerica.com/ProductDetail.aspx?MfrCode=DAC&MfrPartNumber=80403
If by chance some one knows where to get the steal one i would like to fix it that way but it is much better than what was there
Phils toys
Is the factory AC tube different than the non-AC tube?
Quote from: TIGGER on February 24, 2008, 11:09:55 PM
Is the factory AC tube different than the non-AC tube?
I do not know as the ac one was missing when i got the car and i can not find a part number for eather in my parts list. but the one from the "H" pipe to the manafold did not fit the same on my 76 /ac as it did on the 78 non ac i got it from.
phils toys
Try Classic Hose and Tube or find one in a local wrecking yard.