Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: bodirt on October 28, 2007, 08:38:18 PM
hey y'all
new to the board and i have a few questions 4 ya.
i want to convert my 80 model to 5 lug and bigger disc brakes front and rear. iknow its gonna be a pain in the rear but any and all info would be appreciated.where can i get a left rear quarter panel?where can i get the front valance that goes under the front bumper?
EBAY
Quote from: bodirt on October 28, 2007, 08:38:18 PM
i want to convert my 80 model to 5 lug and bigger disc brakes front and rear.
Do a search on here for the lug conversion stuff. This has been covered many times, and there are a couple different options.
Quote from: bodirt on October 28, 2007, 08:38:18 PM
where can i get a left rear quarter panel?
Best bet would be to find a donor car, or someone parting one out, and they are rare, but I have seen new replacements on eBay.
Quote from: bodirt on October 28, 2007, 08:38:18 PM
where can i get the front valance that goes under the front bumper?
map351 is making fiberglass ones for a VERY reasonable price. He sells them on eBay, and on here as well.
:welcome: bodirt
From Pintony
alright
i think i have found the solution to this problem.speedway motors has a kit you can purchase,several actually,and they come with11
inch rotors so if you have a road racer you might want to check it out.some come with the big g.m. caliper
Front 5 lug conversion:
Maveric Rotors, GM metric Calipers, Caliper Brackets from rjays.com.
turbowagonman