Pinto Car Club of America

How do you remove the wiper knob and bezel without breaking them? Thanks!

I think (I might be confused with the Headlight Switch) there is a hole on the Bottom side of the switch, all you do is stick a small punch in the Hole and pull the Knob Straight out. Then you have to have a set of Clip Ring Pliers or Snap Ring Pliers (I forgot exactally what they are called) to remove the Nut. I believe thats the way it comes out, I may be wrong but I don't have a extra switch to confirm this. So take a look at the under side of the switch and see if there is a small hole and if it does that is the way it comes out.
If not, on the Knob there is a Square opening that has a metal tab in there pry that towards the Knob and the handle will slide off, then using a Clip Ring Pliers or Snap Ring Pliers you can unscrew the holding nut.

turbowagonman