Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: PintoMan1 on August 16, 2007, 06:25:45 PM

Title: 1600cc valeve cover wanted
Post by: PintoMan1 on August 16, 2007, 06:25:45 PM
Hi Guys,
I am looking for a valve cover for a 1600cc engine
Title: Re: 1600cc valeve cover wanted
Post by: kd5fnb on August 18, 2007, 07:51:55 PM
have u found 1 yet? i think i have 1.
Title: Re: 1600cc valeve cover wanted
Post by: PintoMan1 on August 23, 2007, 08:28:02 PM
     
      No I haven't! Cooool!!!! Let me know what you find out!!
      Cooool!!!! Thanks!!!
Title: Re: 1600cc valeve cover wanted
Post by: PintoMan1 on August 24, 2007, 03:17:08 PM

       I hate to ask, but i am also looking for the oil pan for the same engine? Thank you!!



     
Title: Re: 1600cc valeve cover wanted
Post by: kd5fnb on August 27, 2007, 04:34:56 PM
i do have a valvecover but it has 2 small holes in the top back . you can tig or mig them up. it is a bit rusty.i do not have a oilpan . if you still wont it let me know ill give it to you for shiping cool.i think a 84/85/86 ford feseta is the motor . i know the block is a m771 and the pinto is a m711 but most of the parts are close to the same.



                                                                  good luck chris :fastcar:
Title: Re: 1600cc valeve cover wanted
Post by: PintoMan1 on August 27, 2007, 09:44:20 PM
       Cooooooollll!!!!! :fastcar: :fastcar: E-Mail me with info and I will send out money order asap!!!
            Maybe I can get this motor  to run after all!!! If there is any thing i can do for you let me know.





                                                                                     Thanks Glen :fastcar:
Title: Re: 1600cc valeve cover wanted
Post by: cromcru on September 09, 2007, 07:54:39 PM
there is a 72 pinto with a 1600 motor in it. at our local pick and pull yard in oroville,ca.since i dont know how close you are might be a long drive.
Title: Re: 1600cc valeve cover wanted
Post by: Pintony on September 09, 2007, 09:46:04 PM
There R 20 Formula Ford guys headed there right NOW!!!
Title: Re: 1600cc valeve cover wanted
Post by: PintoMan1 on September 10, 2007, 07:59:20 AM
     
       Hi CROMCRU,
  I havent found one yet, but any help would be greatly appreciated! And yes Ca. is to far from Pa. There may be a difference between the 72 & the 73. I have a long bracket across the top of my cover, the 72 i belive has a short bracket. It will work for me, but with that i will also need the throttle cable because of the bracket size. If i could ask of you to get that stuff for me and what it might cost it would be very much appreciated!!!!

    and tony thats very funny!!!
                                                                                 Thanks Glen!
Title: Re: 1600cc valeve cover wanted
Post by: kd5fnb on September 10, 2007, 10:24:47 PM
pintoman1 email me your adrs. and i will get it in the mail for you .

                                 ps. i'll let u know what the shiping is.
                                      my email is kd5fnb@yahoo.com
Title: Re: 1600cc valeve cover wanted
Post by: douglasskemp on September 25, 2007, 11:02:04 PM
eBay Item number: 330168956570
As of this posting it had 4+ days left.
Title: Re: 1600cc valeve cover wanted
Post by: cromcru on September 26, 2007, 03:47:29 AM
hell,if i had the money i would buy both motor and trans complete. just so i could put them into a possible classic inported ford i have been looking at. those possibles include an early 60's ford anglia and a mk1 68 ford cortina gt and 72 mk2 cortina.but life being what it is and work is slowing down at the mill. cant buy the parts for anyone sorry to say.
Text only | Text with Images