Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: FESPERMAN on July 18, 2007, 12:29:28 PM
Thanks
Figured it out
so... how did you do it? share the info please ;D
CEnter pieces lift off to reveal track underneath. There are "tits" that stick up out of the car and through two holes in the track. There is a clip that fits onto the "tit" as a collar. You simply lift up the tab and slide the clip forward and off. pretty easy once I looked at it.
I will probably have to use body tape to put it on my car.
Thanks ;D