Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: 302PintoMan on June 21, 2007, 10:00:08 PM

Title: 5 lug conversion
Post by: 302PintoMan on June 21, 2007, 10:00:08 PM
What hubs do I need to buy to convert from 4 lug to 5 lug on a 1980 Pinto?  I was told there was a hub that can be gotten that allows you to convert to 5 lug at a parts store   
cheap.  Is it mustang II hubs?
Title: Re: 5 lug conversion
Post by: Pintony on June 21, 2007, 11:10:03 PM
Hello 302PintoMan,
Any street-rod company that sells the 9" 5-lug rotor will work.
I prefer Heidts or fatmans.
From Pintony
Title: Re: 5 lug conversion
Post by: 302PintoMan on June 22, 2007, 01:32:07 PM
Quote from: Pintony on June 21, 2007, 11:10:03 PM
Hello 302PintoMan,
Any street-rod company that sells the 9" 5-lug rotor will work.
I prefer Heidts or fatmans.
From Pintony

Need it for the front though not the rear.  rear is already 5 lug
Title: Re: 5 lug conversion
Post by: Pintony on June 22, 2007, 04:38:15 PM
Hello 302PintoMan,
The front rotor is 9"round.
From Pintony
Title: Re: 5 lug conversion
Post by: dave1957 on June 22, 2007, 07:25:07 PM
speedwaymotors.com 29.95 each new not redrilled
Text only | Text with Images