Print Page - need parts and help finding a Rebuild Kit for a 2.8

Title: need parts and help finding a Rebuild Kit for a 2.8
Post by: 75bobcatv6 on June 17, 2007, 02:50:16 PM

Looking for the following parts for a 77 2.8 block Rings/bearings pistons (performance if possible) Cam and cam bearings. The engine has been Bored over .030 already so rings need to match that Specification. I'm having a hard time finding the parts out here to keep going on the Restoration/customization of it. Also looking for the rear interior panels, black is preferred but i will take what i can find if they are in good condition.

Title: Re: need parts and help finding a Rebuild Kit for a 2.8
Post by: dragonfire on June 17, 2007, 03:30:03 PM

try Racer walsh has what you are looking for

Title: Re: need parts and help finding a Rebuild Kit for a 2.8
Post by: 77turbowagon on June 19, 2007, 05:30:14 PM

Also try northern auto parts. Do a web search for them.
I have a pair of tan rear interior panels out of an 80 Bobcat if your interested, pics too.

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: 75bobcatv6 on June 17, 2007, 02:50:16 PM