Print Page - driveline help needed

Title: driveline help needed
Post by: slcktrcks on May 26, 2007, 01:48:14 AM

I have a 77 pinto wagon that I'm fixing up,currently 2.3 & 4spd and I've done the 8" rearend conversion. I've acquired an 86 Tbird T5 and bellhousing, what driveline and yoke do I need to get? Is there one from a specific car that I can get and just put in or? Any help would be greatly appreciated.

Title: Re: driveline help needed
Post by: 77turbopinto on May 26, 2007, 08:25:38 AM

http://www.fordpinto.com/index.php?option=com_smf&Itemid=55&topic=4106.msg24151#msg24151

http://www.turboford.net/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=2;t=040352

http://www.fordpinto.com/index.php?option=com_smf&Itemid=55&topic=7050.0

Title: Re: driveline help needed
Post by: turbowagonman on May 29, 2007, 07:28:15 PM

I've got a Pinto Drivshaft in my 8"/T-5 combo in my 80 Wagon. I've beat the $hit out of it, and it's held up behind a Turbo 2.3.

turbowagonman

Title: Re: driveline help needed
Post by: 77turbopinto on May 29, 2007, 08:37:57 PM

Quote from: turbowagonman on May 29, 2007, 07:28:15 PM
I've got a Pinto Drivshaft in my 8"/T-5 combo...

turbowagonman

There are at least 4 different length "PINTO DRIVESHAFTS" that I know of.

Bill

Title: Re: driveline help needed
Post by: turbowagonman on May 29, 2007, 09:11:26 PM

Quote from: 77turbopinto on May 29, 2007, 08:37:57 PM
There are at least 4 different length "PINTO DRIVESHAFTS" that I know of.

Bill

I was not aware of the HUGE selection of Pinto drive shafts! ;D

Mine came from this combo: 2.3, C-4 and 6¾ rear end, it measures 46" from center to center of the U-Joints.

turbowagonman

Title: Re: driveline help needed
Post by: 77turbopinto on May 30, 2007, 06:45:48 AM

OK then, 5.....

Bill

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: slcktrcks on May 26, 2007, 01:48:14 AM