Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: jimdaug on February 06, 2007, 10:25:44 PM
Does anyone know where I can get an electric choke to replace the hot water choke on an older model ('74 i think) carburetor. I found a weber electric choke, but it doesn't seem to work for some reason. I would think at least the element would get warm, so I think it's bad. I'm putting a reman carb on an older engine, so I haven't actually run the carburetor yet, but I've hooked up the weber choke to a battery and it doesn't even move the butterflies. Does any body know where I can get either a universal electric choke, or a replacement choke for one of the later model years? Or if anyone has a new electric choke, I would be happy to take it off their hands. Thanks for any info you guys can provide.
James
you can use a electric choke butt. from a later 2.8 one from a 85 broncoII will bolt right on i just done it works just fine.same engine in a ranger pick up. the carb i used was from a 75 pinto.