Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: Icuffm2 on January 26, 2007, 01:25:28 PM
Garage Cleaning Sale!!
I need to sell all my Ford Pinto 2000cc parts. I raced a 2.5 stock litre hydroplane for the last 3 years and now changing motor programs. If you need it I got it and tons of it. Flywheels, motor, mounts, hi-torque starters, complete heads. fresh from the machine shop short block, MSD distributors, points, cams, Petronix ignitor, piston, rods, bare blocks, intakes, exhaust, carbs, ect ect ect. I bet I have at least enough parts for three complete engines. No offers turned down. It is taking space in my garage and has to go. I can provide pictures of all my parts and will help deliver them. I am going to Sandusky, OH in Feb for starters.
Contact Sean Bowsher @ 217-669-2183
email postmaster@roostertails.net
I am looking for a lower front crank cover oil seal housing, as pictured below. It is for a 1974 Ford Pinto 2.0L. 2.0 EAO
The 2.0 L (1993 cm³) EAO was used in many vehicles from the early 1970s. Bore was 90.8 mm (3.57 in) and stroke was 76.9 mm (3.03 in). The 1971 Pinto and Capri used this engine with a single Weber 32/36 DFAV carburetor and 8.2:1 compression. In this application, it produced 64 kW (86 hp) and 140 N·m (103 ft·lbf). The engine was produced in Cologne, Germany.
Output in the Escort RS2000 was 82 kW (110 hp) and 161 N·m (119 ft·lbf).
Applications:
? 1971 Ford Pinto 2000
? 1971 Ford Capri 2000
? Ford Cortina Mk III and IV
? 1975 Ford Escort RS2000
? 1978 Ford Transit
Any assistance locating one would be greatly appreciated. My contact information is below.
Thank you.
72 HM 6L071 AA
m.c.d.2.
Was the number stamped on it with the Ford logo, but I can not get that to cross reference. If anything else will help track this down let me know.
Craig Nilson
KUKA Flexible Production Systems
Controls Engineering
6600 Center Drive
Sterling Heights, MI 48312
Phone: 586.795.2000 ext 4113
Cell: 586.707.0832
Fax: 586.649.4430
cnilson@kukausa.com
hello i am looking for an oil pan and maybe a complete 2.0 for my kit car. my home email is abadecals@windstream.net. allen