Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: ltursick on January 23, 2007, 10:36:51 PM
Is there any difference between a 2.0 flywheel and a 2.3?
The stock ones are not interchangeable. The 2.3 crankshaft has a larger bolt circle diameter by about a quarter inch. The flywheel center hole size is the same. They also both use six bolts of the same thread size. Some after market suppliers do drill their flywheels with both 2.0 and 2.3 bolt patterns so they can be used on either engine..