Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: douglasskemp on December 13, 2006, 09:06:09 PM
Here is the link for the universal fit window channel from J.C. Whitney.
http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=ZX193464U&searchbtn.x=13&searchbtn.y=15
These are flexible and can be installed with a little persuasion from a rubber mallet. Also, just cut the corner at the upper rear of the channel at a 45 degree angle to get it to fit properly with the one running up the back of the door. It fits really snug.
"when installing use a little wd40 or silicon to lubricate the window channel (inside) and also make sure you have a good rubber hammer. start at one end and tap into the channel as you go make sure to tap in real good at the corners..cut with a drimiel tool and your done..."
All of this info is from whizzo1998 from the Yahoo! group: FORDPINTOSTREETMACHINES. I have yet to purchase a set for myself, but I know he knows what he is talking about.
--Doug