Pinto Car Club of America

can any one tell me the center to center measurement of the cross shaft mounting holes for a pinto upper arm.

Brad

my tubulars are sitting right beside me and it is 5 inches center to center.

thanks theres a guy selling some tubular arms off his race car and they look like they will fit a pinto so i emailed him and asked about them and all i need to know was the center to center measurements from both before i bought them.  thanks

did you mean the holes where they bolt to the frame or how wide the a arm is where the bushings go in.

i meant where they bolt to the frame

brad

yup, thats what i thought you meant....5 inches is correct.

Quote from: 78pinto on February 20, 2004, 10:40:53 AM
my tubulars are sitting right beside me and it is 5 inches center to center.

Are they shiney?
Just for fun I checked my flat black arms and they are at 5".
Some of the problems I had were rusted bolts. I had to cut off one of the bolts to the frame on the upper drivers side. I had to cut off a shock bolt on a lower arm and thw sway bar link mount on the drivers side lower arm broke off. Im searching for one of those.
Have fun. ;)

Quote from: Glassman on February 28, 2004, 08:45:26 AM
thw sway bar link mount on the drivers side lower arm broke off. Im searching for one of those.

If you can't find one locally, let me know.