Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: wingless01 on December 03, 2006, 08:55:05 PM
do i need the t-5 flywheel and clutch/pressure plate to put a t-5 on my 2.3 or will the stock 4spd flywheel clutch/pressure plate work?
If you have the Mustang aluminum trans with 10 spline input it should bolt right up without changing anything. If it's the little Pinto box with the fine spline(don't remember spline count) you'll have to change the clutch disc and bellhousing and as long as you're there you mightas well change the pressure plate to. You might have to modify the trans mount to.
little thunder