Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: pinto_351 on February 17, 2004, 11:28:59 AM

Title: water pump ?'s
Post by: pinto_351 on February 17, 2004, 11:28:59 AM
does anyone know if ford made a short water pump for a 302-351w?  Any help would be greatly appreciated.
Title: Re:water pump ?'s
Post by: 78pinto on February 17, 2004, 01:01:01 PM
yes i believe the early mustang and the falcons used a short pump, they can be bought through summit and the ford motorsport catalog
Title: Re:water pump ?'s
Post by: pinto_351 on February 17, 2004, 01:11:03 PM
have any idea how much shorter thet are?
Title: Re:water pump ?'s
Post by: Chris on February 17, 2004, 03:01:40 PM
Try looking into a Borg-Warner #420 water pump. I have a book on how to put a v-8 in a pinto and thats the one it suggeests becasue of its shortness.
Title: Re:water pump ?'s
Post by: hoots on February 17, 2004, 09:05:36 PM
Here's a look. It's from a 94/95 Mustang 5.0. The impeller had to be changed for correct flow. The pulleys are Ford Performance, single belt.  Contact Ken at Performance Motors in Valley Springs, SD 605-757-6281
Title: Re:water pump ?'s
Post by: pinto_351 on February 17, 2004, 09:32:30 PM
is it sufficient to cool it/ also how would you go about switching impellers/  How much shorter is it anyway?  thanks for the pic.   greatly appreciated
Title: Re:water pump ?'s
Post by: hoots on February 18, 2004, 06:44:38 AM
From the timing chain cover to the center of the pulley...4 1/2 inches. Ken changed the impeller at no charge.
Title: Re:water pump ?'s
Post by: wagonmaster on February 19, 2004, 10:05:38 PM
Ford has a short waterpump listed in the Ford Racing catalog with some of the necessary pieces to accomodate it.