Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => Your Pintos/Bobcats & Racers => Topic started by: 77turbopinto on August 13, 2006, 08:56:57 PM

Title: Re-pinned for the LA2, and installed the big VAM today, WOW!
Post by: 77turbopinto on August 13, 2006, 08:56:57 PM
I did the FMIC a few weeks ago, but finally got to do the comp. swap from the PC1 to the LA2 and get the VAM swapped too. The location of my computer did not make working on re-pinning as easy as it could be, but not too bad.

This car is SOOOOO much better.

The 86 T/C harness is MUCH easier to work with for swaps (XR4TI is even better) than the 87, but the computers are inferier.

I would post a few pics, but the only thing I could show is the big stupid grin.

Bill
Title: Re: Re-pinned for the LA2, and installed the big VAM today, WOW!
Post by: turbopinto72 on August 13, 2006, 08:59:19 PM
Bill, I have an EEC tuner from Shiftmaster I will let go for cheep if you are interested.
Title: Re: Re-pinned for the LA2, and installed the big VAM today, WOW!
Post by: 2point3turbo on September 30, 2006, 01:24:33 AM
I also want to install my LA3 but need instruction and pin swapping. Can you help please???
Title: Re: Re-pinned for the LA2, and installed the big VAM today, WOW!
Post by: 77turbopinto on October 01, 2006, 02:22:46 PM
I would tell you what to do, but I have no idea what harness you have. What VAM and injectors are you running? That is important too.

Go over to turboford.net, all the info comes right up in a search.

Bill
Title: Re: Re-pinned for the LA2, and installed the big VAM today, WOW!
Post by: 2point3turbo on October 02, 2006, 01:13:28 AM
I will check it out. Thanks.
Text only | Text with Images