Print Page - Fuel Sending Unit Reading

Title: Fuel Sending Unit Reading
Post by: Blacksheep22 on June 25, 2006, 09:46:59 AM

Im getting close to finishing up my 73 Wagon and have one major thing left, The gas gauge doesnt work. Im going to pull the tank and check the sending unit and float but cant find anywhere what ohms readings I should get at empty and full. Anybody Know? Thanks in Advance.

Title: Re: Fuel Sending Unit Reading
Post by: earthquake on July 06, 2006, 01:40:45 AM

First off whats it doing.If it reads full all the time its the resistor on the back of the cluster.If it reads empty all the time then it is more than likely the sending unit.

Title: Re: Fuel Sending Unit Reading
Post by: Blacksheep22 on July 06, 2006, 06:15:03 PM

Thanks but Ive got it fixed. It was just stuck from sitting about ten years. Now its on four jackstands with the Transmission out being changed! Gas no good without tranny! :lol: Thanks Again. Blacksheep

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Blacksheep22 on June 25, 2006, 09:46:59 AM