Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: dholvrsn on June 19, 2006, 11:58:08 AM

Title: basic door question
Post by: dholvrsn on June 19, 2006, 11:58:08 AM
Do coupe and wagon doors interchange?

Thanks!
Title: Re: basic door question
Post by: billnall on June 19, 2006, 12:51:31 PM
No they are different.
Title: Re: basic door question
Post by: eatmydust on June 19, 2006, 04:06:11 PM
plasmu cutter and wirefeedwelder it will fit :swirl:
Title: Re: basic door question
Post by: dholvrsn on June 19, 2006, 06:02:14 PM
Is the whole door different or is it just the window frame and window?

Either way, it looks like like I'm going to dust off a lot of rusty wire welding skills to get a decent door.
Title: Re: basic door question
Post by: phils toys on June 19, 2006, 08:47:35 PM
the wagon door is longer
Title: Re: basic door question
Post by: wagonmaster on June 19, 2006, 09:26:05 PM
The sedan/hatchback and wagon doors are exactly the same except for the door glass frame. The sedan/hatchback glass frame tapers to the rear while the wagon glass frame goes close to straight back. In the Ford parts books, the replacement door skins, as well as other door components, are listed as fitting all models. The door weatherstrips are also listed as fitting all models so, if the wagon doors were longer, they would have to be different or they would be stretched more than they already are. With care, the glass frames can be changed.
Text only | Text with Images