Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: rokarolla on June 11, 2006, 12:31:03 PM
Havn't taken my eBay Pinto apart yet, but is has a bad enigne knock.
It runs and drives but will knock unless kept at low rpms.
Can this condition be adjusted away?
I have seen tips like:
replace the cam with ranger rolling cam
lubricate the lifters
I am going to try lubing the lifters. Any other suggestions before I go seriously tearing the enigine apart?
Hello rokarolla,
Sounds like a bad lifter ot a broken valve spring.
Pull the V.C. and let us know what you found.
The ranger cam is a great retro-fit to the early 2.3...
From Pintony