Pinto Car Club of America

I have a 72 Pinto Drag car that has drum brakes on the front. I bought the Mustang II front spindle/disc brake conversion with 2" drop spindles off of e-bay (fatrodders). I've now found that the spindles are 1" taller. Would bolting on the mustang II upper and lower control arms solve my dilema? Will they bolt onto the frame in the same locations where the pinto's are?  I already have new tie rod ends(mustang II) and a new steering rack(early pinto) that I'll machine and weld adapters because of the different thread size. Any help would be greatly appreciated.
                                                                                                                   Thanks,
                                                                                                                          Lee

WOW Dude you are really screwed!
There are guys out there that say it can be done but I would not try it.
Your only choice now is to cut the early cross member off and weld in a later Mii style cross member.
That is what I did on my 73.
From Pintony

thanks for the help. ??? You know anyone that needs 2" drop spindles/brakes? Ha Ha

Quote from: dragpinto on April 18, 2006, 07:53:48 PM
thanks for the help. ??? You know anyone that needs 2" drop spindles/brakes? Ha Ha

iF YOU JUST WANT FRONT DISC BRAKES?
wILWOOD MAKES A LIGHT DUTY SET FOR DRAG RACING AND A MED DUTY SET FOR STREET DRIVING.
fROM pINTONY

I have seen a bunch of posts that all the later pinto suspention will fit on the early ones IF you use ALL the parts from the later car. I have never owned an early pinto, so I can't say for sure, butI have seen posts.

Bill

If front discs you want early pintos  had them also, and are easy to do.I have a 73 with all the parts including the proportioning valve if your interested

I ended up just buying a complete wilwood kit off of ebay instead. I'm selling the other complete kit if anyone is interested. Thanks for all the help.