Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => Derby Cars => Topic started by: hvyeqop69 on April 11, 2006, 10:44:54 PM

Title: Drivetrain Topic
Post by: hvyeqop69 on April 11, 2006, 10:44:54 PM
I was wondering what drivetrain everyone uses in their cars? I use C4 automatics and an 8 inch rearend with 4.62 gears and a mini spool.
:neutral:
Title: Re: Drivetrain Topic
Post by: demoiowa89r on April 18, 2006, 03:42:53 PM
I use the stock drive train but i weld spiders for posi.   :accident:  Matt  89r
Title: Re: Drivetrain Topic
Post by: Nevada Pinto on April 19, 2006, 01:03:55 AM
 Stock 2.3 with no welded rear end...
Title: Re: Drivetrain Topic
Post by: hvyeqop69 on April 19, 2006, 04:52:45 PM
Stock rears aren't as much fun though. You can usually get the gears on ebay for $60-75 bucks and mini spool for an 8 inch for $23 w/ shipping.
Title: Re: Drivetrain Topic
Post by: stang2 on April 23, 2006, 06:00:39 AM
If I run an auto it is a C4 with 8" and 4:62 gears.  Most of the time it is a manual with 8" and 3:40 or 3:55 gears.
Title: Re: Drivetrain Topic
Post by: johnsonracing on June 18, 2006, 07:52:37 AM
I always run a manual tranny.Automatics take to much power away.I have a lightened flywheel.I run either 4.11 or 3.55 gears in an eight inch rear-end with a spool.Motor is a stock 2.3,with my magical touch applied to it.My motor is usually heard above the other ones.I turn it at 6,000 RPM when demoing.My race car I turn at 7,400 RPM.
Text only | Text with Images