Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: Gaslight on February 15, 2006, 07:45:36 AM
I am looking for a 4 speed pedal assembly for my 74 Pinto. I have run into a guy with an assembly from a 74 Mustang. What are the chances that the assembly is a crossover and are the same items?
Jake
You should not need an assy., just the pedals and the mount for the clutch arm.
The mannual brake, and power brake have different pedals, but they will interchange, they just have different pivot points. Might take a different frame.
The clutch pedal pivot bolts to the stock frame with three nuts and a bolt-plate on the left side. Un-bolt the brake arm and install the 4spd one, easy.
I don't know if the pedals are the same, but you can have your local ford dealer see if they have the same part #'s.
Bill